

It has inbuilt support for the ESP32-S3 by default and can upload code to it perfectly fine with no issues.
- Size
- 99 × 98 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 71
- Pads
- 224
- Tracks, vias
- 361, 48
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Apr 2026
- Updated
- 25 Jun 2026
Overview
ESPLC is an open-source printed circuit board by LemionLaLemon, from the LemionLaLemon/ES-PLC32 repository on GitHub. It is a 2-layer board of 99 × 98 mm with 52 parts on 71 nets, routed with 361 tracks and 48 vias.
It is built around the ESP32-S3-WROOM-1-N8 and AMS1117-3.3. Its parts include 16 resistors, 12 connectors, 8 capacitors, 6 ICs and 6 switches. It belongs with the ESP32 boards of this library.
Main components
2ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdES-PLC32
The ES-PLC32 is an affordable programmable logic computer with four digital inputs, two analog inputs, and four outputs.
[!WARNING] The ES-PLC32 is not IEC 61131 compliant.

Digital Inputs
The four digital inputs should be able to handle up to 24v at 20mA but realistically should be used at 3.3v or 5v. The inputs are electrically isolated from the ESP32 via the pc817 optocoupler.
Analog Inputs
The analog inputs are insanely dangerous to use. It is only able to handle 3.3v-5v and is absolutely not electrically isolated from the ESP32, so any power you push in through that input, will go through two resistors to divide the 5v to 3.3v (or 3.3v to 1v ish) and then directly to the ESP32. (this will be resolved in a later iteration)
Outputs
The outputs are purely digital and can be used to drive pumps, turn on lights, open motorized valves, and such. There are no analog outputs to keep it affordable.
Screen and buttons
The 0.96" 128x64 OLED display can be used to change setpoints for anything, view variables live, to restart the program, or start/stop hosting the programming interface, and show the ip for the programming interface.
Software
The ES-PLC32 uses OpenPLC to program in ladder logic (and other languages) and to upload the program to the ES-PLC32. It is recommended to use functional block diagram rather than ladder logic as OpenPLC seems to hate ladder logic a lot.

It has inbuilt support for the ESP32-S3 by default and can upload code to it perfectly fine with no issues.

Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7, R8, R10, R11 |
| 4 | 470R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U3, U4, U5 |
| 4 | Screw_Terminal_01x03 | CustomTerminalblocks:1x3 | J5, J6, J7, J8 |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | DOWN, OK, UP |
| 2 | 0.1μF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 100uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C6, C8 |
| 2 | 20k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R12 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H5.0_APEM_MJTP1250 | SW1, SW2 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C7 |
| 1 | 22uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | A1 | CustomTerminalblocks:TerminalBlock-1x2-5.08mm-with3d | J9 |
| 1 | A2 | CustomTerminalblocks:TerminalBlock-1x2-5.08mm-with3d | J10 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.00mm:PinSocket_1x08_P2.00mm_Horizontal | J12 |
| 1 | D1 | CustomTerminalblocks:TerminalBlock-1x2-5.08mm-with3d | J1 |
| 1 | D2 | CustomTerminalblocks:TerminalBlock-1x2-5.08mm-with3d | J2 |
| 1 | D3 | CustomTerminalblocks:TerminalBlock-1x2-5.08mm-with3d | J3 |
| 1 | D4 | CustomTerminalblocks:TerminalBlock-1x2-5.08mm-with3d | J4 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | R1 | CustomRelays:Relay_SPDT_Hongfa_JQC-3FF_0XX-1Z | K1 |
| 1 | R2 | CustomRelays:Relay_SPDT_Hongfa_JQC-3FF_0XX-1Z | K2 |
| 1 | R3 | CustomRelays:Relay_SPDT_Hongfa_JQC-3FF_0XX-1Z | K3 |
| 1 | R4 | CustomRelays:Relay_SPDT_Hongfa_JQC-3FF_0XX-1Z | K4 |
| 1 | SSD1306 | CustimDisplays:128x64OLED | Brd1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J11 |
Similar boards
- 2 layers86 × 54 mm

- 2 layers55 × 100 mm

- 2 layers110 × 100 mm

PidginTranslator
DevMubarak1/PidginTranslator
Handheld translator for Nigerian languages. No internet needed for common phrases, YarnGPT for everything else.
14 parts21MIT - 4 layers58.5 × 85.5 mm

- 2 layers50.6 × 71.1 mm

Open ESPilot
Tomas-Kuchta-FPV/Open-ESPilot
An open-source project to develop a custom ESP32-based flight controller designed primarily for use with ArduPilot. Focused on affordability, flexibility, and ease of integration with various robotic and UAV platforms.
109 parts18CERN-OHL-W-2.0 - 4 layers102 × 100 mm

Zelvicka
RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.
214 parts12 - 2 layers156 × 66 mm

Dash 6.8
romioRN/Dash6.8-hardware
wifi name "service", password 12345678, connect to 192.167.4.1
152 parts11Apache-2.0 - 4 layers100 × 100 mm

Questions
How big is the ESPLC PCB?
It measures 99 × 98 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESPLC use?
52 parts, built around the ESP32-S3-WROOM-1-N8 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESPLC KiCad files?
From the LemionLaLemon/ES-PLC32 repository on GitHub, at the commit this page was made from: the board is KiCad/ESPLC.kicad_pcb and its schematic KiCad/ESPLC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESPLC design in my own project?
Its repository states no licence, so its author keeps all rights: ask LemionLaLemon before reusing the design.