
H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
Tracker for the NSSL EFM
Tracker is an open-source printed circuit board by LeemanGeophysicalLLC, from the LeemanGeophysicalLLC/NSSL_EFM_Tracker_PCB repository on GitHub, published under the MIT licence. It is a 4-layer board of 78.7 × 57.2 mm with 58 parts on 38 nets, routed with 275 tracks and 72 vias.
It is built around the ATMEGA328P-AU, MIC5219-3.3YM5 and BSS138, with the CR1220-2 among its other parts. Its parts include 18 resistors, 14 capacitors, 6 ICs, 4 diodes and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
The tracker provides GPS location data to instrument operators via a satellite
connection. It is designed to enable easy location of the instrument package during
and after flight, supporting both flight termination decisions and efficient recovery
of the full payload. The tracker uses a progressive rate strategy to optimize battery
life, providing high-rate position updates during the most dynamic and critical phases
of the flight.
See the main instrument repo for documentation and the rest of the instrument.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1-0000007 | capacitors_0603:1-0000007 | C1, C2, C3, C6, C7, C8, C9, C10, C11, C14 |
| 7 | 1-0000006 | resistors_0603:1-0000006 | R7, R10, R11, R12, R13, R14, R15 |
| 4 | 1-0000008 | resistors_0603:1-0000008 | R6, R8, R9, R17 |
| 4 | 1-0000013 | resistors_0603:1-0000013 | R1, R2, R3, R4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 1-0000010 | resistors_0603:1-0000010 | R5, R16, R18 |
| 3 | 1-0000075 | capacitors_0805:1-0000075 | C4, C12, C13 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Blue | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 1 | 1-0000018 | capacitors_0603:1-0000018 | C5 |
| 1 | 16MHz | lib_fp:Resonator | Y1 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | CR1220 | lib_fp:S8411-45R | BT1 |
| 1 | Green | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | Polyfuse | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | RockBlock9603 | lib_fp:picoblade | J1 |
| 1 | RockBlockMechanical | lib_fp:RockBlock_Mechanical | U4 |
| 1 | SW_SPST | lib_fp:SW_GF-123-0054 | SW1 |
| 1 | TSR2 | lib_fp:TSR 2-2450 | U3 |
| 1 | XBee | lib_fp:XBee | U1 |
| 1 | Yellow | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | barepcb | lib_fp:BarePCB | PCB1 |
| 1 | ublox_SAM-M8Q | RF_GPS:ublox_SAM-M8Q | U5 |

jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller


maelgui/wordclock
This repository contains every files needed to build the clock


thorpej/pg68k
The 68k Playground, a 680x0-based home-brew computer with multiple CPU options



relic-se/PicoSynth_Sandbox-hardware
Raspberry Pi Pico digital synthesizer board with I2S stereo audio i/o, MEMS microphones, MIDI i/o, a capacitive keybed, 1602 display, 2 rotary encoders, and LiPo battery. Designed for use with CircuitPython and synthio.
It measures 78.7 × 57.2 mm and has 4 copper layers, 1.6 mm thick.
58 parts, built around the ATMEGA328P-AU, MIC5219-3.3YM5, BSS138 and CR1220-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LeemanGeophysicalLLC/NSSL_EFM_Tracker_PCB repository on GitHub, at the commit this page was made from: the board is KiCAD_Project/tracker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).