
Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

Analog PCB/charge amplifier for the NSSL EFM
Analog pcb is an open-source printed circuit board by LeemanGeophysicalLLC, from the LeemanGeophysicalLLC/NSSL_EFM_Analog_PCB repository on GitHub, published under the MIT licence. It is a 4-layer board of 44.4 × 31.8 mm with 36 parts on 11 nets, routed with 134 tracks and 22 vias.
It is built around the ATTINY45-20SU. Its parts include 16 capacitors, 3 resistors, 3 ICs, 2 diodes and 1 connector. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
The analog charge amplifier performs the actual coulomb counting for the electric field
measurement and filters the signal before passing it to the rotating electronics for
digitization, synchronization, and logging. This board closely follows the design of
the original instrument and includes a small microcontroller that allows temperature-
independent control of the filter's cutoff frequency.
See the main instrument repo for documentation and the rest of the instrument.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C9, C11, C16 |
| 5 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C3, C4, C10, C12, C14 |
| 5 | TestPoint | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP1, TP2, TP3, TP4, TP5 |
| 3 | Fiducial | Fiducials:Fiducial_1mm_Dia_2mm_Outer | FID1, FID2, FID3 |
| 2 | 0.39nF | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 1N4148 | Diodes_SMD:D_SOD-323F | D1, D2 |
| 2 | 20p | Capacitor_SMD:C_0603_1608Metric | C13, C15 |
| 1 | 0.1u | lib_fp:1-0000787 | C6 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 100M | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 20MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | ATtiny45-20SU | Package_SO:SOIC-8_5.275x5.275mm_P1.27mm | U3 |
| 1 | Board to Board | Pin_Headers:Pin_Header_Straight_1x10_Pitch2.54mm | J1 |
| 1 | LF356 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | LTC1569-6 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | MountingHole | Mounting_Holes:MountingHole_3.2mm_M3_ISO7380 | H1 |
| 1 | barepcb | misc:barepcb | PCB1 |

UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

Petezah/roomba_wall_v2
An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba




cbs-ntcore/cbs_badge
This badge is designed to highlight digital fabrication techniques that are commonly used in the Neurotechnology Core(NTCore) at the Center for Brain Science at Harvard University.

enwi/PiSupply
Uninterruptable power supply for Raspberry Pi's, which can also power external HDDs

mar0x/bike_motor_shim
Shimano e-bike shim between wheel sensor and motor to "extend the limits"
It measures 44.4 × 31.8 mm and has 4 copper layers, 1.6 mm thick.
36 parts, built around the ATTINY45-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LeemanGeophysicalLLC/NSSL_EFM_Analog_PCB repository on GitHub, at the commit this page was made from: the board is KiCAD_Project/analog_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).