

Learning shield
Shield to teach the basics of the Arduino platform.
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 31
- Pads
- 137
- Tracks, vias
- 190, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Dec 2019
- Updated
- 10 Feb 2021
Overview
Learning shield is an open-source printed circuit board by LeemanGeophysicalLLC, from the LeemanGeophysicalLLC/Arduino_Learning_Shield repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.6 × 53.3 mm with 44 parts on 31 nets, routed with 190 tracks and 21 vias.
It is built around the 74HC14 and MMBT3904. Its parts include 16 resistors, 10 connectors, 4 capacitors, 4 diodes and 4 switches.
Main components
274HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInvertersMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdArduino_Learning_Shield
Shield to teach the basics of the Arduino platform.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8, R10 |
| 4 | 510 | Resistors_SMD:R_0603_HandSoldering | R11, R12, R13, R14 |
| 4 | C | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C4 |
| 4 | CONN_01X01 | Socket_Arduino_Uno:Arduino_1pin | P5, P6, P7, P8 |
| 4 | LED A | LEDs:LED_0805_HandSoldering | D1, D2, D3, D4 |
| 2 | 1k | Resistors_SMD:R_0603_HandSoldering | R15, R16 |
| 1 | 74HC14 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U1 |
| 1 | Analog | Socket_Arduino_Uno:Socket_Strip_Arduino_1x06 | P2 |
| 1 | Buzzer | Buzzers_Beepers:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x10 | P3 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P4 |
| 1 | LOGO | lib_fp:LG_MARK_025in | G*** |
| 1 | MMBT3904 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | Ping Sensor | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J1 |
| 1 | Power | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P1 |
| 1 | R_PHOTO | lib_fp:photoresistor | R9 |
| 1 | R_POT | lib_fp:ebay_potentiometer | RV1 |
| 1 | Servo | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J2 |
| 1 | Switch A | lib_fp:ebay_button | SW1 |
| 1 | Switch B | lib_fp:ebay_button | SW2 |
| 1 | Switch C | lib_fp:ebay_button | SW3 |
| 1 | Switch D | lib_fp:ebay_button | SW4 |
| 1 | TMP36xS | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
Similar boards
- 2 layers

- 4 layers210.8 × 74.9 mm

Bkm-10rlternative
skumlos/bkm-10rlternative
Project aiming to replicate the BKM-10R/11R remote for Sony professional CRT monitors.
257 parts17 - 4 layers220 × 170 mm

Arpeggiator
EwoudVV/arpeggiator
12-note analog arpeggiator with a 1/2/3 octave range, custom pcb and printed case
360 parts3 - 4 layers83 × 121 mm

Carrier1 Adalogger M0 2x3pin
Safecast/bGeigieScint
The board features an integrated boost converter + linear regulator topology for SiPM bias generation:
123 parts2 - 2 layers39.4 × 46.2 mm

Panel gauge clock
pilotingpete/panel-gauge-clock
From ./Build dir make clean and make all are available.
83 parts1 - 4 layers100 × 100 mm

Retro-002
githubgilhad/HW-001
HD6309 - HW deska pro CPU+RAM+GLUE+SystemBus - prvni navrh
353 partsGPL-3.0 - 2 layers47 × 29 mm

Motion nightlight
longrackslabs/kicad-projects
Motion-activated nightlight built into a Nest Protect housing. ESP32 firmware, custom PCB, 3D printed enclosure and diffuser.
24 parts - 2 layers155 × 75 mm

Hacklock-2137
p-durlej/hswaw-hscloud
Controller board for next gen hacklock door / lock / access control system.
119 parts
Questions
How big is the Learning shield PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Learning shield use?
44 parts, built around the 74HC14 and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Learning shield KiCad files?
From the LeemanGeophysicalLLC/Arduino_Learning_Shield repository on GitHub, at the commit this page was made from: the board is KiCAD_Project/learning_shield/learning_shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Learning shield design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).