
Remote controller board
Leczok12/gate-opener
This device can open gate remotly using ESP RainMaker app or Google home.

This device can open gate remotly using ESP RainMaker app or Google home.
Gate opener is an open-source printed circuit board by Leczok12, from the Leczok12/gate-opener repository on GitHub. It is a 2-layer board of 97.3 × 40.6 mm with 29 parts on 52 nets, routed with 150 tracks and 0 vias.
It is built around the ESP32-WROOM-32, AMS1117 and WS2812B. Its parts include 6 ICs, 5 resistors, 5 connectors, 3 capacitors and 3 diodes. It belongs with the ESP32 boards of this library.
This device can open gate remotly using ESP RainMaker app or Google home.

| Name | Amount | Url |
|---|---|---|
| ESP-WROOM32 | 1 | Aliexpress |
| WS2812B LED | 3 | Aliexpress |
| Capacitor SMD 100nf | 3 | Aliexpress |
| USB-C 6 pin | 1 | Aliexpress |
| Pin header 7 pin and 5 pin | 1 | Aliexpress |
| Pin socket 7 pin | 1 | Aliexpress |
| Resistor 10K ohm | 1 | - |
| PC817 | 4 | - |
| Resistor 100ohm | 4 | - |
| Momentary switch 3x4x2.5mm | 3 | - |
| AMS117 3.3V | 1 | - |
| JST_XH_2.54 2 pin sockets | 2 | - |
| gate remote* | 1 | - |
* in my case it is HORMANN HSM4-868
Create config.hpp file in software dir using config-template.hpp and fill gaps.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 4 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U3, U4, U5 |
| 3 | 100nF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3 |
| 3 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3 |
| 2 | Conn_01x02 | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J3, J4 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal | J1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | PROG | Button_Switch_SMD:Panasonic_EVQPUM_EVQPUD | SW3 |
| 1 | RESET | Button_Switch_SMD:Panasonic_EVQPUM_EVQPUD | SW2 |
| 1 | SW_Push | Button_Switch_SMD:Panasonic_EVQPUM_EVQPUD | SW1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | P1 |
The 25 most common of 29 parts.

Leczok12/gate-opener
This device can open gate remotly using ESP RainMaker app or Google home.

klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.



joaogabrielsantosD/Dongle-eaLIVE-PCB
PCB of the DongleEALIVE for reading data from the vehicle's CAN bus with telemetry via BLE, supporting GPS and accelerometer.

trieuhuyduc/Clean_room_slave
ESP32-based slave controller board for cleanroom equipment — RS485/Modbus, isolated I/O, 220V mains control (KiCad)


klaus-liebler/self-balancing_robot
hardware and software for a super cheap self balancing robot

It measures 97.3 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the ESP32-WROOM-32, AMS1117 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Leczok12/gate-opener repository on GitHub, at the commit this page was made from: the board is pcb/main-board/main-board.kicad_pcb and its schematic pcb/main-board/main-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Leczok12 before reusing the design.