
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A macropad with 5 buttons, a knob, OLED screen and LEDs!
HackClubThing is an open-source printed circuit board by LRGuess, from the LRGuess/BigSaltyKeypad-5ROL repository on GitHub. It is a 2-layer board of 75 × 68 mm with 37 parts on 27 nets, routed with 148 tracks and 18 vias.
It is built around the SK6812MINI-E. Its parts include 12 diodes, 6 switches, 2 ICs and 1 resistor. It belongs with the keyboards and input boards of this library.
A 5 key Macropad with a rotary encoder, OLED display and 5 LEDs all using QMK firmware.
This keypad comes together by sandwiching the PCB between the bottom and top parts of the case and fastening it together with 4 M3 screws. The 2 case peices are 3d printed as well as the rotary encoder's cap! I designed it in Fusion 360.

Case:

Assembly:

My PCB was designed in KiCAD, feel free to take a look at the designes below!


This keypad uses QMK firmware for everything!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SK6812MINI-E | HackClubCarePackage:SK6812MINI-E_fixed | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 5 | LOGO | Assets:Arrow | G***, G***, G***, G***, G*** |
| 5 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5 |
| 1 | 350 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | ER_OLEDM0.91_1x-I2C | Oled:SSD1306-0.91-OLED-4pin-128x32 | U2 |
| 1 | LOGO | Assets:CanadaFlag | G*** |
| 1 | LOGO | Assets:Gd | G*** |
| 1 | LOGO | Assets:LethalCompany | G*** |
| 1 | LOGO | Assets:BK2 | G*** |
| 1 | LOGO | Assets:Hack Club | G*** |
| 1 | LOGO | Assets:PonyWithAGun | G*** |
| 1 | LOGO | Assets:BK | G*** |
| 1 | LOGO | Assets:TripleT | G*** |
| 1 | LOGO | Assets:ClubstepMonster | G*** |
| 1 | LOGO | Assets:Smol | G*** |
| 1 | LOGO | Assets:Blohaj | G*** |
| 1 | MOUDLE-SEEEDUINO-XIAO | HackClubCarePackage:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW6 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.


It measures 75 × 68 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LRGuess/BigSaltyKeypad-5ROL repository on GitHub, at the commit this page was made from: the board is PCB/HackClubThing.kicad_pcb and its schematic PCB/HackClubThing.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LRGuess before reusing the design.