

Panel
- Size
- 86 × 99 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 305
- Nets
- 232
- Pads
- 945
- Tracks, vias
- 1,168, 164
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Jul 2025
- Updated
- 10 Sep 2026
Overview
Panel is an open-source printed circuit board by KuruczKende, from the KuruczKende/OmniPin repository on GitHub. It is a 2-layer board of 86 × 99 mm with 305 parts on 232 nets, routed with 1,168 tracks and 164 vias.
It is built around the ESP32-C3-MINI-1, AMS1117-3.3 and TP4057, with the 1N5819WS, IRLML6244 and IRLML6402 among its other parts. Its parts include 76 capacitors, 52 resistors, 24 diodes, 16 switches and 12 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
6ESP32-C3-MINI-1
--40℃~+81℃ -89dBm 2.4GHz 350mA 3V~3.6V 82mA ESP32-C3 Chip On-board PCB Antenna UART - WiFi Modules ROHSRF CrazyWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTP4057
SOT-23-6-40℃~+85℃ 1 25uA 4.24V 4V~6.5V Charging IC Lithium Battery Not supported SOT-23-6 Battery Management ROHSTECH PUBLICBattery Management1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesIRLML6244
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 20V 21mΩ@4.5V 6.3A 700pF 8.9nC@4.5V 98pF SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsIRLML6402
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 110pF 12nC 145pF 20V 3.7A 400mV 633pF 65mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
README
README.mdOmniPin
Description
This is a badge that can be customized while worn. The project contructs from a mobile application and a device.
Technical Details
Microcontroller used: ESP32-C3-Mini-1 E-Paper: GDEM0154F51H
Parts
305| Qty | Value | Footprint | References |
|---|---|---|---|
| 97 | NPTH | NPTH | KiKit_MB_10_2, KiKit_MB_10_3, KiKit_MB_10_4, KiKit_MB_11_2, KiKit_MB_11_3, KiKit_MB_11_4, KiKit_MB_12_2, KiKit_MB_12_3, KiKit_MB_12_4, KiKit_MB_13_2, KiKit_MB_13_3, KiKit_MB_13_4, KiKit_MB_14_2, KiKit_MB_14_3, KiKit_MB_14_4, KiKit_MB_15_2 +81 |
| 32 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C10, C10, C10, C10, C11, C11, C11, C11, C12, C12, C12, C12, C16, C16, C16, C16 +16 |
| 28 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R4, R4, R4, R5, R5, R5, R5, R10, R10, R10, R10, R12, R12, R12, R12 +12 |
| 20 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C2, C2, C2, C2, C3, C3, C3, C3, C4, C4, C4, C4 +4 |
| 20 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C5, C5, C5, C13, C13, C13, C13, C14, C14, C14, C14, C15, C15, C15, C15 +4 |
| 16 | 1N5819WS | Diode_SMD:D_SOD-323_HandSoldering | D1, D1, D1, D1, D3, D3, D3, D3, D4, D4, D4, D4, D5, D5, D5, D5 |
| 8 | 2K | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1, R2, R2, R2, R2 |
| 8 | 3R | Resistor_SMD:R_0603_1608Metric | R9, R9, R9, R9, R11, R11, R11, R11 |
| 8 | Conn_01x02_Pin | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | BAT1, BAT1, BAT1, BAT1, J4, J4, J4, J4 |
| 8 | LED | LED_SMD:LED_0603_1608Metric | D2, D2, D2, D2, D6, D6, D6, D6 |
| 4 | 0.8R | Resistor_SMD:R_0603_1608Metric | R3, R3, R3, R3 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C6, C6, C6, C6 |
| 4 | 2-1734839-4 | FPC:TE_2-1734839-4 | J2, J2, J2, J2 |
| 4 | 470R | Resistor_SMD:R_0603_1608Metric | R13, R13, R13, R13 |
| 4 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3, U3, U3, U3 |
| 4 | BOOT | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | SW2, SW2, SW2, SW2 |
| 4 | ESP32-C3-MINI-1 | ESP32:ESP32-C3-MINI-1 | U1, U1, U1, U1 |
| 4 | IRLML6244 | Package_TO_SOT_SMD:SOT-23 | Q2, Q2, Q2, Q2 |
| 4 | IRLML6402 | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1 |
| 4 | L | Inductor_SMD:L_Taiyo-Yuden_NR-30xx_HandSoldering | L1, L1, L1, L1 |
| 4 | NEXT | SW_BT:SW_SPST_B3U-1000P | SW4, SW4, SW4, SW4 |
| 4 | POWER | SW_BT:SW_SPDT_PCM12 | SW3, SW3, SW3, SW3 |
| 4 | RST | SW_BT:SW_SPST_B3U-1000P | SW1, SW1, SW1, SW1 |
| 4 | TP4057 | Package_TO_SOT_SMD:TSOT-23-6 | U2, U2, U2, U2 |
| 4 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118193-0002LF_Horizontal | J1, J1, J1, J1 |
More from KuruczKende/OmniPin
1- 2 layers32 × 38 mm

Similar boards
- 4 layers28.7 × 42.5 mm

Squathero V1
jasonbowman55/PCB_Design
This repository will hold all of the necessary files for me to begin learning how to better design PCB boards, as well as project files for various PCB design projects.
41 parts - 2 layers

- 2 layers88.4 × 62.5 mm

Techno Buffalo
OklahomaOpenSourceHardware/OKC-OSH-2024-Badge
2024 badge for Oklahoma PCB Tech Conferences
61 parts3 - 4 layers64.8 × 58.7 mm

- 4 layers64.8 × 58.7 mm

Salp board
Jack-Cb/sensOrbPorted
Repository for undergraduate thesis code, documentation, and PCB design. Thesis link: https://ir.library.oregonstate.edu/concern/honors_college_theses/b5645158b?locale=en
61 parts - 4 layers110 × 80 mm

PNP MOBO V2
GabrielD98/PickUS_and_PlacUS
pick and place de PCB pour projet S4 de robotique
126 parts5MIT - 4 layers35.2 × 68 mm

- 6 layers55 × 95 mm

Questions
How big is the Panel PCB?
It measures 86 × 99 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel use?
305 parts, built around the ESP32-C3-MINI-1, AMS1117-3.3, TP4057 and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the KuruczKende/OmniPin repository on GitHub, at the commit this page was made from: the board is DeviceHardware/OmniPin/panel.kicad_pcb and its schematic DeviceHardware/OmniPin/OmniPin.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask KuruczKende before reusing the design.