Skip to the content
2 layers95.5 × 66.4 mmHackpad, the printed circuit board in 3D

A Macropad created for everyday use.

Size
95.5 × 66.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
20
Pads
71
Tracks, vias
221, 13
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
3 Oct 2026
Updated
4 Nov 2026

Overview

Hackpad is an open-source printed circuit board by Krupamc, from the Krupamc/keypad_2026 repository on GitHub. It is a 2-layer board of 95.5 × 66.4 mm with 17 parts on 20 nets, routed with 221 tracks and 13 vias.

It is built around the SK6812MINI-E. Its parts include 6 diodes, 5 switches, 1 IC and 1 connector. It belongs with the keyboards and input boards of this library.

Main components

1

README

README.md

My Linux-looking Macropad

The name is a work in progress I know haha. This is my macropad, a small custom shortcut pad with several layers of shortcuts that are changed through the rotary encoder. Different LEDs light up and the OLED with update with the current layer and appropriate image. I created this in order to increase my productivity and overall workflow of my desk.

Features:

  • 128x32 OLED Display for customized layer imagary
  • EC11 Rotary encoder to switch between layers.
  • 5 Layer LEDs to coordinate with the layers (will activate one by one and change colors; layer 0 has 1 navy blue LEDs, layer 1 has 2 dark blue LEDs).
    • (Colors are customizable)
  • 4 Keys
  • 1 Status/Ambient LED
  • Being a really cool thing to flex.

PCB:

The PCB (Printed Circuit Board) was created using KiCad. Awesome open source software. You can open the PCB here: View PCB on KiCanvas

Schematic:

image Here is the plan for the PCB laid out with my wiring.

PCB:

image image Very cool looking PCB. I added as much silkscreen I could to really sell the terminal-inspired design.

CAD:

image I created a case in Fusion. Excuse how it is not very good/original as it is my first time doing CAD before. I have two parts: the bottom and top case. ### Bottom Case: The bottom case is a box with standoffs to hold (on the top-right, and bottom-left) the PCB. M3x16mm screws go through the screw holes on the bottom through the standoffs. The bottom case also has a single foot that has a 40° angle for one inch. (same as my current keyboard to be consistant) The foot has small circle indents for rubber feet in future or hot glue. There is also a USB-C cutout for the microcontroller image ### Top Case: This section has extrusions for heat inserts to go (for the screws mentioned before) as well as holes for the OLED, LEDs, keys, and the rotary encoder. image image

Firmware Functions:

Coded in KMK (Micro-python based keyboard framework). On each layer, a configurable photo, text splash and color (for LEDs) is shown. The number of LEDs active is based on the layer number.

Right now the short cuts include:

  • Copy, Paste, Undo, Redo
  • CTRL + F, clipboard, File explorer, Screenshots
  • Pause unpause, mute discord mic, defen discord, mute pc

Planned to add ones for games I play/other applications later.


BOM:

  • 1X Seeed XIAO RP2040
  • 1x 0.91" 128x32 OLED Display
  • 4x Cherry MX Switches
  • 4x DSA Keycaps
  • 1x EC11E Rotary encoders
  • 6x SK6812 MINI-E LEDs
  • 2x M3x16mm screws
  • 2x M3x5mx4mm heatset inserts
  • 3x Parts for 3D Case (Top, Bottom, and Knob).

Parts

17
QtyValueFootprintReferences
6SK6812MINI-ELED_SMD:LED_OPSCO_SK6812_PLCC4_5.0x5.0mm_P3.1mmD0, D1, D3, D4, D5, D6
4SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW0, SW1, SW2, SW3
2LOGOLOGOG***, G***
1MOUDLE-SEEEDUINO-XIAOfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1
1OLED ScreenConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW5

The 15 most common of 17 parts.

Similar boards

  • 4 layers234 × 84 mmMain panel, the printed circuit board in 3D

    Main panel

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    234 parts3kApache-2.0
  • 4 layers180.8 × 300.3 mmDilemma, the printed circuit board in 3D

    Dilemma

    Bastardkb/Dilemma

    The Dilemma is a vertical stagger low-profile keyboard with mods.

    383 parts590
  • 4 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    106 parts575GPL-2.0
  • 2 layersDemo, the printed circuit board in 3D

    Demo

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    48 parts547GPL-3.0
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    62 parts517GPL-2.0
  • 4 layers82.5 × 39.4 mmV4head, the printed circuit board in 3D

    V4head

    makerforgetech/modular-biped

    An open source framework for creating a bipedal modular companion robot.

    26 parts493GPL-3.0
  • 2 layers115.7 × 95.7 mmFifi split keeb, the printed circuit board in 3D

    Fifi split keeb

    raychengy/fifi_split_keeb

    Fifi Keyboard 🐶 ⌨️

    66 parts334
  • 4 layers70 × 54 mmPicoLab, the printed circuit board in 3D

    PicoLab

    CoretechR/PicoLab

    Web-GUI Embedded Multitool

    285 parts327GPL-3.0

Questions

How big is the Hackpad PCB?

It measures 95.5 × 66.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Hackpad use?

17 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hackpad KiCad files?

From the Krupamc/keypad_2026 repository on GitHub, at the commit this page was made from: the board is PCB/hackpad.kicad_pcb and its schematic PCB/hackpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hackpad design in my own project?

Its repository states no licence, so its author keeps all rights: ask Krupamc before reusing the design.