2 layers93 × 35 mm
2 layers75.7 × 37.5 mm
ArmletG
Kreyl/Generation- Size
- 75.7 × 37.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 107
- Nets
- 79
- Pads
- 381
- Tracks, vias
- 3,629, 235
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Mar 2016
- Updated
- 24 Feb 2019
Overview
ArmletG is an open-source printed circuit board by Kreyl, from the Kreyl/Generation repository on GitHub. It is a 2-layer board of 75.7 × 37.5 mm with 107 parts on 79 nets, routed with 3,629 tracks and 235 vias.
It is built around the CC1101RGP, NSS20101J and BLM15AG102SN1, with the IRLML9303, PMEG2020EH and L3GD20 among its other parts. Its parts include 39 capacitors, 25 resistors, 7 transistors, 5 inductors and 4 diodes. It belongs with the STM32 boards of this library.
Main components
7
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
NSS20101J
SC-89-3-55℃~+150℃ 1 NPN 100nA 15mV 1A 200 20V 255mW 350MHz 6V NPN SC-89-3 Bipolar (BJT) ROHSonsemiBipolar (BJT)
BLM15AG102SN1
04021 1kΩ@100MHz 300mA 650mΩ ±25% 0402 Ferrite Beads ROHSMurataFerrite Beads
IRLML9303
SOT-23MOSFETsLeiditech
PMEG2020EH
SOD-123F1 Independent 200uA@20V 20V 2A 525mV@2A 9A SOD-123F Schottky Diodes ROHSNexperiaSchottky Diodes
L3GD20
LGA-16(4x4)-40℃~+85℃ 16bit 2.4V~3.6V 5uA Gyroscope SPI、I2C X,Y,Z ±2000dps LGA-16(4x4) Accelerometers ROHSSTMicroelectronicsAccelerometers
LSM303DLHC
LGA-14LGA-14 New Arrivals ROHSSTMicroelectronicsUncategorised
Parts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1u | Capacitors:CAP_0603 | C3, C13, C16, C17, C19, C21, C26, C28, C30, C31, C39 |
| 9 | 10u | Capacitors:CAP_0603 | C4, C7, C9, C11, C12, C14, C23, C24, C29 |
| 7 | 10k | Resistors:RES_0603 | R2, R3, R17, R18, R19, R20, R26 |
| 5 | 10n | Capacitors:CAP_0603 | C1, C2, C10, C35, C38 |
| 5 | 18pF | Capacitors:CAP_0603 | C5, C6, C15, C18, C20 |
| 4 | * | Resistors:RES_0603 | R6, R7, R8, R12 |
| 4 | 4k7 | Resistors:RES_0603 | R4, R5, R13, R14 |
| 4 | NSS20101 | SOT:SC89-3 | Q3, Q5, Q7, Q8 |
| 3 | BLM15AG102 | Inductors:IND_0402 | L1, L2, L4 |
| 3 | TESTPOINT | PCB:TESTPOINT_1MM | TP1, TP2, TP3 |
| 2 | * | Capacitors:CAP_0402 | C34, C37 |
| 2 | 1k | Resistors:RES_0603 | R16, R27 |
| 2 | 1u | Capacitors:CAP_0603 | C22, C32 |
| 2 | 220pF | Capacitors:CAP_0603 | C33, C40 |
| 2 | CONN_1 | PCB:Oval3x1.5 | XL6, XL7 |
| 2 | IRLML9303 | SOT:SOT23-3 | Q2, Q4 |
| 2 | PMEG2020 | Diodes:SOD323 | D2, D3 |
| 1 | * | Inductors:IND_0402 | L5 |
| 1 | 0.22u | Capacitors:CAP_0603 | C25 |
| 1 | 100k | Resistors:RES_0603 | R23 |
| 1 | 12MHz | Quartz:0503x4-4 | XTAL1 |
| 1 | 150R | Resistors:RES_0603 | R9 |
| 1 | 1M | Resistors:RES_0603 | R1 |
| 1 | 2.2uH | Inductors:IND_1515 | L3 |
| 1 | 20k | Resistors:RES_0603 | R21 |
| 1 | 220u16V | Capacitors:CAP_05xxR_horiz_HOLE | C8 |
| 1 | 24C08 | SO_DIL_TSSOP:SO8_150MIL | DD1 |
| 1 | 27MHz | Quartz:03225C4 | XTAL2 |
| 1 | 3.3pF | Capacitors:CAP_0603 | C36 |
| 1 | 390R | Resistors:RES_0603 | R10 |
| 1 | 390k | Resistors:RES_0603 | R22 |
| 1 | 3k | Resistors:RES_0603 | R11 |
| 1 | 56k | Resistors:RES_0603 | R25 |
| 1 | ANT_PCB_MONO | Radio:ANT_868_ARMLETG | ANT1 |
| 1 | BALUN868JOHANSON | Radio:BALUN_JOHANSON868 | BLN1 |
| 1 | BUTTON6x6 | BtnsSwitches:BTN_6x6 | SW3 |
| 1 | CC1101 | QFN_DFN:QFN20 | DD5 |
| 1 | CONN_4 | Connectors:PBS-4R | XL2 |
| 1 | CONN_4 | Connectors:PLS-4 | XL8 |
| 1 | CONN_5 | Connectors:PLS-5 | XL4 |
| 1 | CONN_6 | Connectors:PLS-6 | XL1 |
| 1 | Fuse0R | Resistors:RES_0603_FUSE | F1 |
| 1 | IT-1187U | BtnsSwitches:BTN_4x4_SMD | SW1 |
| 1 | L3GD20 | LGA:16_4X4_P065 | DD3 |
| 1 | LED | LEDs:LED_Through-Hole-5mm-HOR | D4 |
| 1 | LED_5050 | LEDs:LED_5050 | Q1 |
| 1 | LSM303DLHC | LGA:14_5X3_P08 | DD4 |
| 1 | Logo | Pictures:Ostranna_16d9_13d5 | Logo1 |
| 1 | MCP73832 | SOT:SOT23-5 | DA1 |
| 1 | MOTOR_NO_CONTACTS | Installation:Motor_no_Contacts | M1 |
| 1 | NCP1529DFN | QFN_DFN:DFN6 | DA2 |
| 1 | NOKIA_BAT | Connectors:CONN_NOKIA_ACC | XL5 |
| 1 | STM32L476Rx | LQFP_TQFP:LQFP64 | DD2 |
| 1 | USB_Micro_B | Connectors:USBmicro_MOLEX_WM17142 | XL3 |
| 1 | WhiteLED | LEDs:LED_Through-Hole-5mm-HOR | D1 |
More from Kreyl/Generation
3
Similar boards
- 4 layers200 × 99 mm
BSMainPCB
Kreyl/BigSphere
To create effects use https://github.com/notiel/SphereUI Change arrays in EffectPulse.h and EffectStrobo.h to generated by effect creator
877 parts - 2 layers46 × 103 mm
- 2 layers30 × 103 mm
- 4 layers21.6 × 401 mm
- 4 layers118 × 21.4 mm
- 2 layers38.1 × 22.9 mm
- 2 layers30.2 × 53.5 mm
- 2 layers89 × 50 mm
Questions
How big is the ArmletG PCB?
It measures 75.7 × 37.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ArmletG use?
107 parts, built around the CC1101RGP, NSS20101J, BLM15AG102SN1 and IRLML9303. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArmletG KiCad files?
From the Kreyl/Generation repository on GitHub, at the commit this page was made from: the board is Armlet_hw/PCB/ArmletG.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArmletG design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.