2 layers34.9 × 34.3 mm
BSLedPCB
Kreyl/BigSphere
To create effects use https://github.com/notiel/SphereUI Change arrays in EffectPulse.h and EffectStrobo.h to generated by effect creator
6 parts
4 layers200 × 99 mm
BSMainPCB
Kreyl/BigSphereTo create effects use https://github.com/notiel/SphereUI Change arrays in EffectPulse.h and EffectStrobo.h to generated by effect creator
- Size
- 200 × 99 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 877
- Nets
- 377
- Pads
- 2,608
- Tracks, vias
- 11,744, 1,690
- Pours
- 68
- Routed
- Yes
- KiCad
- KiCad 5 (file 20190905)
- Created
- 1 Oct 2019
- Updated
- 26 May 2020
Overview
BSMainPCB is an open-source printed circuit board by Kreyl, from the Kreyl/BigSphere repository on GitHub. It is a 4-layer board of 200 × 99 mm with 877 parts on 377 nets, routed with 11,744 tracks and 1,690 vias.
It is built around the CC1101RGP, ST1S10PHR and USBLC6-4, with the 74HC595, BLM15AG102SN1 and PMEG2020EH among its other parts. Its parts include 263 resistors, 237 capacitors, 68 inductors, 20 transistors and 12 diodes. It belongs with the STM32 boards of this library.
Main components
7
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
ST1S10PHR
SOIC-8-EP-25℃~+125℃ 1 1.5mA 2.5V~18V 3A 800mV~13.6V 900kHz~1.2MHz Adjustable Buck Buck Built-in Yes SOIC-8-EP DC-DC Converters ROHSSTMicroelectronicsDC-DC ConvertersUSBLC6-4
UncategorisedSTMicroelectronics
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
BLM15AG102SN1
04021 1kΩ@100MHz 300mA 650mΩ ±25% 0402 Ferrite Beads ROHSMurataFerrite Beads
PMEG2020EH
SOD-123F1 Independent 200uA@20V 20V 2A 525mV@2A 9A SOD-123F Schottky Diodes ROHSNexperiaSchottky Diodes
IRLML9303
SOT-23MOSFETsLeiditech
README
README.mdBigSphere
Hardware for big shining sphere with 70 bright LEDs
To create effects use https://github.com/notiel/SphereUI Change arrays in EffectPulse.h and EffectStrobo.h to generated by effect creator
Parts
877| Qty | Value | Footprint | References |
|---|---|---|---|
| 131 | 10u | Capacitors:CAP_0805 | C113, C114, C115, C116, C117, C118, C119, C120, C121, C122, C123, C124, C125, C126, C142, C143 +115 |
| 110 | TESTPOINT | PCB:TESTPOINT_1MM | TP1, TP10, TP11, TP12, TP13, TP100, TP101, TP102, TP103, TP104, TP105, TP106, TP107, TP108, TP109, TP110 +94 |
| 90 | 0R15 | Resistors:RES_1206 | R100, R106, R107, R108, R109, R110, R111, R112, R113, R114, R115, R141, R142, R143, R144, R145 +74 |
| 82 | 100k | Resistors:RES_0603 | R101, R121, R123, R124, R125, R126, R127, R128, R129, R130, R131, R132, R133, R134, R135, R136 +66 |
| 66 | 1u | Capacitors:CAP_0603_Silks | C127, C128, C129, C130, C131, C132, C133, C134, C135, C136, C137, C138, C139, C140, C199, C200 +50 |
| 63 | 2.2uH | Inductors:IND_SRN2512 | L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L20, L21, L22, L23, L24, L25 +47 |
| 63 | CONN_2 | PCB:Oval3x1.5wHole0d9_x2 | XL10, XL11, XL12, XL13, XL14, XL15, XL16, XL17, XL18, XL19, XL20, XL21, XL22, XL25, XL26, XL27 +47 |
| 63 | ST1CC40_SO8 | SO_DIL_TSSOP:SO8_150MIL | DA2, DA10, DA11, DA12, DA13, DA14, DA15, DA16, DA17, DA18, DA19, DA20, DA21, DA22, DA23, DA24 +47 |
| 54 | 0R1 | Resistors:RES_1206 | R102, R103, R104, R105, R116, R117, R118, R119, R137, R138, R139, R140, R151, R152, R153, R154 +38 |
| 22 | 0.1u | Capacitors:CAP_0603_Silks | C10, C12, C13, C14, C16, C17, C18, C19, C20, C22, C24, C25, C26, C27, C28, C32 +6 |
| 13 | 1k | Resistors:RES_0603 | R3, R4, R5, R6, R7, R8, R9, R10, R11, R14, R15, R20, R263 |
| 10 | 1000u | Capacitors:CAP_10Rx16_HOR | C23, C40, C69, C112, C141, C184, C213, C256, C285, C335 |
| 10 | 2N7002 | SOT:SOT23-3 | Q1, Q3, Q5, Q7, Q9, Q11, Q13, Q15, Q17, Q19 |
| 10 | CONN_2 | Connectors:2ZHDRC-02P | XL5, XL6, XL7, XL8, XL23, XL24, XL39, XL40, XL55, XL56 |
| 9 | 10k | Resistors:RES_0603 | R19, R22, R56, R72, R120, R122, R170, R186, R220 |
| 9 | 20k | Resistors:RES_0603 | R229, R231, R233, R235, R253, R255, R257, R259, R261 |
| 9 | IRF9321 | SO_DIL_TSSOP:SO8HEATSINK | Q2, Q4, Q6, Q8, Q10, Q12, Q14, Q16, Q18 |
| 9 | LED | LEDs:LED_0805 | D3, D4, D5, D6, D7, D8, D9, D10, D11 |
| 8 | 74HC595 | SO_DIL_TSSOP:SO16_150MIL | DD3, DD4, DD5, DD6, DD7, DD8, DD9, DD10 |
| 4 | 18pF | Capacitors:CAP_0603_Silks | C4, C8, C11, C15 |
| 4 | HOLE_METALLED | PCB:Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 3 | BLM15AG102 | Inductors:IND_0402 | L1, L3, L68 |
| 2 | 2.2u | Capacitors:CAP_0603 | VCap1, VCap2 |
| 2 | 56k | Resistors:RES_0603 | R12, R13 |
| 2 | PMEG2020 | Diodes:SOD323 | D1, D2 |
| 1 | 1.2nH | Inductors:IND_0402 | L4 |
| 1 | 100pF | Capacitors:CAP_0402 | C33 |
| 1 | 10n | Capacitors:CAP_0603_Silks | C1 |
| 1 | 10uH | Inductors:SDR0604 | L2 |
| 1 | 12 MHz | Quartz:03225C4 | XTAL2 |
| 1 | 1M | Resistors:RES_0603 | R1 |
| 1 | 1k5 | Resistors:RES_0603 | R17 |
| 1 | 27MHz | Quartz:03225C4 | XTAL1 |
| 1 | 2R0 | Resistors:RES_0603 | R2 |
| 1 | 2pF | Capacitors:CAP_0402 | C35 |
| 1 | 2u2 | Capacitors:CAP_0603_Silks | C3 |
| 1 | 4k7 | Resistors:RES_0603 | R16 |
| 1 | ANT_PCB_MONO_2PIN | Antennas:ANT_868_IFA_SIMPLEJOY_MIRR | ANT1 |
| 1 | BALUN868JOHANSON | Radio:BALUN_JOHANSON868 | BLN1 |
| 1 | CC1101 | QFN_DFN:QFN20 | DD1 |
| 1 | CONN_1 | Connectors:PLS-1Rnd | XL71 |
| 1 | CONN_2 | Connectors:W02_Pitch_2d54 | XL79 |
| 1 | CONN_2 | Connectors:WB-02(MW-2M) | XL2 |
| 1 | CONN_5 | Connectors:PLS-5 | XL3 |
| 1 | CONN_6 | Connectors:PLS-6_LOCK | XL1 |
| 1 | Fuse0R | PCB:FuseShorted | F1 |
| 1 | IRLML9303 | SOT:SOT23-3 | Q20 |
| 1 | LED | LEDs:LED_0603 | D12 |
| 1 | Logo | Pictures:Ostranna_16d9_13d5 | Logo1 |
| 1 | ST1S10 | SO_DIL_TSSOP:SO8HEATSINK | DA1 |
| 1 | STM32F405RX-64 | LQFP_TQFP:LQFP64 | DD2 |
| 1 | SWITCH_H | BtnsSwitches:SW_SS9 | SW1 |
| 1 | USBLC6 | SOT:SOT23-6 | U1 |
| 1 | USB_MICRO | Connectors:USBmicro_MOLEX_1050170001 | XL4 |
More from Kreyl/BigSphere
1Similar boards
- 2 layers75.7 × 37.5 mm
- 2 layers46 × 103 mm
- 2 layers30 × 103 mm
- 4 layers21.6 × 401 mm
- 4 layers118 × 21.4 mm
- 2 layers66 × 108 mm
- 2 layers61.4 × 62.4 mm
- 2 layers114 × 62 mm
Questions
How big is the BSMainPCB PCB?
It measures 200 × 99 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BSMainPCB use?
877 parts, built around the CC1101RGP, ST1S10PHR, USBLC6-4 and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BSMainPCB KiCad files?
From the Kreyl/BigSphere repository on GitHub, at the commit this page was made from: the board is BSMainPCB/BSMainPCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BSMainPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.