Skip to the content
2 layers65 × 50 mmPower board, the printed circuit board in 3D

A USB-PD 3.1 compatible mini power supply.

Size
65 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
69
Nets
88
Pads
326
Tracks, vias
606, 66
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
23 May 2025
Updated
11 Jul 2025

Overview

Power board is an open-source printed circuit board by Keyaan-07, from the Keyaan-07/USB-PD-Power-Supply repository on GitHub. It is a 2-layer board of 65 × 50 mm with 69 parts on 88 nets, routed with 606 tracks and 66 vias.

It is built around the RP2040, W25Q128JVSIQ and AMS1117S-3.3, with the AP33772SDKZ-13-FA01, BSS138 and ESDS314DBVR-TP among its other parts. Its parts include 20 capacitors, 20 resistors, 7 connectors, 5 diodes and 4 ICs. It belongs with the power boards and the RP2040 boards of this library.

Main components

6

README

Hardware/README.md

Hardware for USB-PD-Power-supply is in this directory

Parts

69
QtyValueFootprintReferences
11100nCapacitor_SMD:C_0402_1005MetricC3, C4, C5, C6, C7, C8, C9, C12, C13, C17, C18
105.1kResistor_SMD:R_0402_1005MetricR6, R7, R8, R9, R10, R11, R17, R18, R19, R20
410uCapacitor_SMD:C_0805_2012MetricC1, C2, C21, C22
41kResistor_SMD:R_0402_1005MetricR1, R2, R5, R16
4MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
31uCapacitor_SMD:C_0402_1005MetricC10, C11, C16
215pCapacitor_SMD:C_0402_1005MetricC14, C15
227Resistor_SMD:R_0402_1005MetricR3, R4
2AON7672EPackage_DFN_QFN:TRANS_AONR21307Q3, Q4
2BSS138Package_TO_SOT_SMD:SOT-23Q1, Q2
2Conn_01x01_SocketConnector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatForkJ7, J8
2ESDS314DBVRPackage_TO_SOT_SMD:SOT95P280X145-5ND3, D4
2LEDLED_SMD:LED_0402_1005MetricD1, D2
110Resistor_SMD:R_0402_1005MetricR14
1100Resistor_SMD:R_0402_1005MetricR15
110kResistor_SMD:R_0402_1005MetricR13
110k @ 25CResistor_SMD:R_0402_1005MetricTH1
15mResistor_SMD:R_0402_1005MetricR12
1AMS1117s-3.3Package_TO_SOT_SMD:SOT-89-3U2
1AP33772SDKZ-13-FA01Package_QFP:AP33772SDKZ13FA01IC1
1Conn_01x03_Pin_SWDConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1Conn_01x04_Socket_OLEDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Conn_01x04_Socket_externalConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1Crystal_GND24Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1LEDLED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolderD5
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU1
1RotaryEncoder_Switch_CurrentRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW3
1RotaryEncoder_Switch_VoltageRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW2
1SW_PushButton_Switch_SMD:SW_SPST_PTS810SW1
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11J2
1USB_C_Receptacle_USB2.0_14P_RP2040Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11J1
1W25Q128JVSPackage_SO:SOIC-8_5.23x5.23mm_P1.27mmU3

Similar boards

  • 4 layers74.3 × 20 mmHardware rp2040 minisdr, the printed circuit board in 3D

    Hardware rp2040 minisdr

    Keyaan-07/RP2040-mini-SDR

    An attempt to make an SDR using the RP2040.

    53 parts3MIT
  • 2 layers34.5 × 18.5 mmHardware PicoKey, the printed circuit board in 3D

    Hardware PicoKey

    Keyaan-07/PicoKey

    A FIDO2 based passkey using the RP2350A and in it's smallest form factor!

    37 parts10MIT
  • 4 layers72 × 72 mmHardware rf, the printed circuit board in 3D

    Hardware rf

    Astralis1409/VikramSat-RF-subsystem

    WIP - VikramSat's Official Radio Communications Subsystem with hardware, software and more.

    100 parts2MIT
  • 4 layers135.1 × 56.9 mmAfterburner, the printed circuit board in 3D

    Afterburner

    CelestineOverflow/Afterburner_PCB

    PCBA Files

    144 partsGPL-3.0
  • 4 layers101.6 × 76.2 mmInnerBoard rev2.1, the printed circuit board in 3D

    InnerBoard rev2.1

    yimengq/Small_VineRobot_Electronics

    172 parts
  • 2 layers46 × 54 mmMini power, the printed circuit board in 3D

    Mini power

    hnz1102/mini-power

    Mini-Power is a small, portable DC power supply unit designed to provide a convenient and reliable source of adjustable voltage for your electronic devices and breadboard experiments.

    52 parts3
  • 2 layers122.2 × 122.8 mmDcpower, the printed circuit board in 3D

    Dcpower

    hnz1102/dcpower

    DC Power Unit for Breadboard based on ESP32-S3 microcontroller and AP33772S USB Power Delivery (PD) Sink Controller.

    115 parts1

Questions

How big is the Power board PCB?

It measures 65 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Power board use?

69 parts, built around the RP2040, W25Q128JVSIQ, AMS1117S-3.3 and AP33772SDKZ-13-FA01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Power board KiCad files?

From the Keyaan-07/USB-PD-Power-Supply repository on GitHub, at the commit this page was made from: the board is Hardware/power_board.kicad_pcb and its schematic Hardware/power_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Power board design in my own project?

Its repository states no licence, so its author keeps all rights: ask Keyaan-07 before reusing the design.