2 layers290.3 × 95.7 mm
2 layers301.2 × 140.8 mm
10133-04 Kicad Project
KeyDapt-LLC/BANANA-LiteBANANA-Lite is a modified version of the BANANA keyboard by RGBKB.
- Size
- 301.2 × 140.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 108
- Nets
- 104
- Pads
- 1,154
- Tracks, vias
- 1,030, 89
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 Oct 2026
- Updated
- 9 Oct 2026
Overview
10133-04 Kicad Project is an open-source printed circuit board by KeyDapt-LLC, from the KeyDapt-LLC/BANANA-Lite repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 301.2 × 140.8 mm with 108 parts on 104 nets, routed with 1,030 tracks and 89 vias.
It is built around the W25Q32JVZPIQ, RP2040TR13 and LBAV170LT1G, with the GG0402052R542P, KMR221NGLFS and BSS138 among its other parts. Its parts include 50 switches, 27 diodes, 15 capacitors, 10 resistors and 3 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
6
W25Q32JVZPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.7V~3.6V 20 Years 32Mbit 3ms SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbondNOR FLASH
RP2040TR13
QFN-56_7X7QFN-56_7X7 New Arrivals ROHSRaspberry PiUncategorised
LBAV170LT1G
SOT-23-65℃~+150℃@(Tj) 1 Pair Common Cathode 150mW 1V 215mA 3us 5nA 85V SOT-23 Switching Diodes ROHSLeshan Radio (LRC)Switching Diodes
GG0402052R542P
0402-55℃~+125℃ 100nA 15.5V 2.5pF 3A@8/20us 46W@8/20us 5.5V 5V ESD IEC 61000-4-2、IEC 61000-4-4 0402 ESD and Surge Protection (TVS/ESD) ROHSKyocera AVXESD And Surge Protection (TVS/ESD)
KMR221NGLFS
SMD,4.2x2.8mm-40℃~+85℃ 1.9mm 2.8mm 2N 32V 4.2mm 50mA Gull Wing Round Button SPST Surface Mount,Vertical SMD,4.2x2.8mm Tactile Switches ROHSC&KTactile SwitchesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdBANANA-Lite
BANANA-Lite is a modified version of the BANANA keyboard by RGBKB.
Get one at keydapt.com/products/banana-keyboard.
Changes from the original
- Nav switch removed: the TM-2028 nav switch and its CNC hat are gone.
- RGB removed: the 48 per-key LEDs and 6 underglow LEDs are gone.
- Magnets: the case and stand use 9 × 1/4" magnets instead of the original's 11 × 6 mm × 6 mm magnets.
Note: Only
10133.kicad_pcbwas modified.10133.kicad_schis unchanged from the original and still shows the nav switch and RGB components.
Instructions
Please view the original project for print and build instructions. They are the same.
License
GPL-3.0, the same license as the original RGBKB Keyboard-files.
Parts
108| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | KEYSW | Legonut's Library:MX-Kailh-Socket | K1, K2, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 +32 |
| 24 | LBAV170LT1G | Legonut's Library:SOT-23-minimal | D1, D2, D10, D11, D12, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +8 |
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6 |
| 5 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C7, C8, C9, C10, C13 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 2 | 10kR | Resistor_SMD:R_0402_1005Metric | R1, R9 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 1kR | Resistor_SMD:R_0402_1005Metric | R5, R8 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 5.1kR | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | GG0402052R542P | Diode_SMD:D_0402_1005Metric | D26, D27 |
| 2 | KMR221NGLFS | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2 |
| 1 | 12Mhz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 1N4007 | Diode_SMD:D_SOD-123F | D13 |
| 1 | 200R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 7.15kR | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MCP1700-3302E_SOT23 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | RP2040TR13 | Legonut's Library:RP2040TR13 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Legonut's Library:HRO-TYPE-C-31-M-14 | J13 |
| 1 | W25Q32JVZP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U3 |
Similar boards
- 2 layers27 × 24.7 mm
- 2 layers50.8 × 62.2 mm
ESP32-GATEWAY Rev I
OLIMEX/ESP32-GATEWAY
ESP32 IoT Gateway board with BLE WIFI and Ethernet
111 parts322Apache-2.0 - 4 layers279.5 × 97 mm
Alpha centauri pcb
jacob-w-gable/alpha_centauri
A split, ergonomic, mechanical keyboard with 40 keys, designed for typing speed and comfort.
224 parts1MIT - 2 layers40.8 × 24.2 mm
- 4 layers23 × 37.5 mm
Pem tiny car pcb
AmeyDEWan/semester-project-PEM-tiny-car
This repository contains the design files and documentation for the PEM2 SoSe25 model car project.
99 parts - 2 layers40.8 × 80 mm
Devkit2
jacobjuneau6/devkit2
A compact ESP32-S3 development board designed for rapid prototyping and embedded projects.
13 partsMIT - 4 layers70 × 50 mm
PD Smart Supply
JaphD/USB-C-PD-Smart-Power-Supply
A compact STM32-controlled USB-C Power Delivery supply providing selectable 5 V, 9 V, 12 V, and 20 V outputs up to 3 A.
73 parts
Questions
How big is the 10133-04 Kicad Project PCB?
It measures 301.2 × 140.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 10133-04 Kicad Project use?
108 parts, built around the W25Q32JVZPIQ, RP2040TR13, LBAV170LT1G and GG0402052R542P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 10133-04 Kicad Project KiCad files?
From the KeyDapt-LLC/BANANA-Lite repository on GitHub, at the commit this page was made from: the board is 10133-04 Kicad Project/10133.kicad_pcb and its schematic 10133-04 Kicad Project/10133.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 10133-04 Kicad Project design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).