
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A small touch key pad which produces sounds when you click it.
LetsMakeSomeNoicesssssss is an open-source printed circuit board by Kartik-design-cmd, from the Kartik-design-cmd/Custom-touchKey-Pad repository on GitHub. It is a 2-layer board of 71.5 × 56.5 mm with 7 parts on 25 nets, routed with 64 tracks and 0 vias.
It is built around the SK6812MINI-E. Its parts include 2 diodes, 1 IC, 1 connector and 1 switch. It belongs with the ESP32 boards of this library.
You will find my .sch, .pro and .pcb files here
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SK6812MINI-E | LED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D3 |
| 2 | Slider | Potentiometer_THT:Potentiometer_Bourns_PTA1543_Single_Slide | RV1, RV2 |
| 1 | Conn_01x07 | Kartik's library:Capacitive touch buttons | J1 |
| 1 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | XIAO-ESP32-S3 | Hackclub Footprints:XIAO ESP32-S3 | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.


It measures 71.5 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kartik-design-cmd/Custom-touchKey-Pad repository on GitHub, at the commit this page was made from: the board is hardware/LetsMakeSomeNoicesssssss.kicad_pcb and its schematic hardware/LetsMakeSomeNoicesssssss.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Kartik-design-cmd before reusing the design.