
T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs

ATtiny85-based LED controller badge. You can program any animation you want with 5 LEDs and use them as heart or star-shaped badges.
Star shape is an open-source printed circuit board by KapHeir, from the KapHeir/attiny_Led_badge repository on GitHub. It is a 2-layer board of 79.6 × 73.9 mm with 17 parts on 15 nets, routed with 152 tracks and 19 vias.
It is built around the ATTINY85-15M. Its parts include 6 resistors, 5 diodes, 2 switches, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
A decorative LED badge project based on the ATtiny85 microcontroller.
This repository contains a star-shaped PCB version and a future heart-shaped PCB version.
The current completed version is the star-shaped badge, which uses 5 LEDs, a push button, a CR2032 battery holder, and an ATtiny85 to generate multiple LED animation patterns.
This project was created as a decorative and educational PCB badge design using KiCad and an ATtiny85 microcontroller.
The badge is designed to:
This repository is also intended as a portfolio-style project that shows:
attiny-led-badge/
│
├── README.md
│
├── star_shape/
│ ├── kicad/
│ ├── gerbers/
│ ├── images/
│ └── code/
│
└── heart_shape/
├── kicad/
├── gerbers/
├── images/
└── code/| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 220Ω | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R5 |
| 1 | 02x03 Header | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | 100nf | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 10kΩ | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | ATtiny85 | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | Battery | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | LED1 | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | LED2 | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | LED3 | LED_SMD:LED_1206_3216Metric | D3 |
| 1 | LED4 | LED_SMD:LED_1206_3216Metric | D4 |
| 1 | LED5 | LED_SMD:LED_1206_3216Metric | D5 |
| 1 | on\off | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW2 |
| 1 | push button | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW1 |

cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs




Guiimartinho/routeai
LLM-Powered Electronic Design Automation Platform for PCB Design

rallekralle11/Tinyreflow
Inspired by afterearthltd's reflow plate, but using fewer and simpler components.

aleh/MIDIMonkey
Listens to MIDI messages on one pin and triggers drums on the others

It measures 79.6 × 73.9 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KapHeir/attiny_Led_badge repository on GitHub, at the commit this page was made from: the board is star_shape/kicad files/Star_shape.kicad_pcb and its schematic star_shape/kicad files/Star_shape.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KapHeir before reusing the design.