
STM32WLE5 RF dongle
FBS93/STM32WLE5_RF_dongle
Compact RF dongle designed for wireless communication through USB.

Stm32G0 mcu is an open-source printed circuit board by KabelitzJ, from the KabelitzJ/stm32G0_mcu repository on GitHub. It is a 4-layer board of 75 × 45 mm with 55 parts on 51 nets, routed with 445 tracks and 85 vias.
It is built around the FT230XS-R, SN74LVC1G14DBV and USBLC6-2SC6. Its parts include 18 resistors, 14 capacitors, 7 ICs, 5 diodes and 3 connectors. It belongs with the STM32 boards of this library.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C6, C7, C9, C11, C13, C14, C17 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R13, R20, R21 |
| 4 | 270 | Resistor_SMD:R_0603_1608Metric | R6, R17, R18, R19 |
| 4 | LED | LED_SMD:LED_PLCC-2_3x2mm_AK | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C8, FB2 |
| 2 | 120 | Resistor_SMD:R_0603_1608Metric | R3, R14 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 47p | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J5, J7 |
| 2 | SN74LVC1G14DBV | Package_TO_SOT_SMD:SOT-23-5 | U4, U5 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2, SW3 |
| 2 | ~ | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U2, U3 |
| 1 | 22 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | D | Diode_SMD:D_0603_1608Metric | D5 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U7 |
| 1 | LOGO | custom:logo2 | G*** |
| 1 | STM32G0B0KETx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | SW_Nidec_CAS-120A1 | Button_Switch_SMD:Nidec_Copal_CAS-120A | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_C_Receptacle_USB2.0_16P | custom:640-USB4215-03-A | J4 |

FBS93/STM32WLE5_RF_dongle
Compact RF dongle designed for wireless communication through USB.




dkozel/noisesource-psu
USB powered and controlled supply for RF Noise Sources

Autonomous-Motorsports-Purdue/AMP_PCBv3
Files relating to version 3 of the PCB for AMP kart

idpromnut/mDotBuddy
A support PCB that allows for powering and logging of an mDot from Multitech either via on-board FTDI or an external FTDI cable.

It measures 75 × 45 mm and has 4 copper layers, 1.6 mm thick.
55 parts, built around the FT230XS-R, SN74LVC1G14DBV and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KabelitzJ/stm32G0_mcu repository on GitHub, at the commit this page was made from: the board is stm32G0_mcu.kicad_pcb and its schematic flash.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KabelitzJ before reusing the design.