

Precision Analog Isolation Amplifier
- Size
- 63.5 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 34
- Pads
- 155
- Tracks, vias
- 313, 28
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 24 May 2025
- Updated
- 7 Nov 2025
Overview
Precision Analog Isolation Amplifier is an open-source printed circuit board by KN-NaMi, from the KN-NaMi/Precision-Analog-Isolation-Amplifier repository on GitHub. It is a 2-layer board of 63.5 × 44 mm with 63 parts on 34 nets, routed with 313 tracks and 28 vias.
It is built around the ADA4522-1AR, ADA4899-1YRDZ and HCNR201, with the SMAJ15A among its other parts. Its parts include 20 capacitors, 11 resistors, 9 diodes, 4 ICs and 4 connectors. It belongs with the audio and music boards of this library.
Main components
4ADA4522-1AR
SOIC855V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-to-Rail Output Operational AmplifierAnalog DevicesUncategorisedADA4899-1YRDZ
SOIC-8-EP-40℃~+125℃ -5V~5V 1 12uA 14.7mA 1nV/√Hz@100kHz 200mA 230uV 310V/us 50nA 5uV/℃ 600MHz 90dB Enable/shutdown function、Built-in compensation、ESD protection SOIC-8-EP Operational Amplifier ROHSAnalog DevicesOperational AmplifierHCNR201
DIP-8Transistor, Photovoltaic Output OptoisolatorsBroadcom LimitedSMAJ15A
DO-214AC(SMA)-65℃~+150℃ 15V 16.4A@10/1000us 18.5V 1uA 24.4V 400W@10/1000us TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
README
README.mdPrecision-Analog-Isolation-Amplifier
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C7, C8, C11, C12, C15, C16 |
| 5 | 33k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R8, R9, R10, R11 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C6, C10, C14 |
| 4 | 47u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5, C9, C13 |
| 4 | FerriteBead_Small | Inductor_SMD:L_1206_3216Metric | FB1, FB2, FB3, FB4 |
| 4 | Fuse | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | F1, F2, F3, F4 |
| 4 | LED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6, D7, D8, D9 |
| 4 | SMAJ15A | Diode_SMD:D_SMA | D2, D3, D4, D5 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C20 |
| 2 | ADA4522 | ADA4522:SOIC127P600X175-8N | U2, U4 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_Coaxial | CONN SMA JACK STR 50 OHM SMD:CONN_732511350_MOL | J3, J4 |
| 1 | --- | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | --- | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | 174k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 200k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 270 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 33p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18 |
| 1 | 47p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 50R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 50k | Potentiometer_THT:Potentiometer_Bourns_3386W_Horizontal | RV1 |
| 1 | 6.8k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | ADA4899-1YRDZ | ADA4899:SOIC127P600X175-9N | IC1 |
| 1 | HCNR201 | HCNR201-300E:HCNR201300E | U1 |
| 1 | LOGO | NaMi_logo:NaMi_logo | G*** |
The 59 most common of 63 parts.
More from KN-NaMi/Precision-Analog-Isolation-Amplifier
1- 2 layers40 × 40 mm

Similar boards
- 2 layers114 × 135.2 mm

Kicker LT3751 OxeBots
OxeBots/ssl_electronics
Oxebots electronics design for the RoboCup Soccer Small-Size League
126 partsGPL-3.0 - 4 layers160 × 170 mm

Analog matrix 4x4 3d
tim4431/analog_programmable_matrix
DC-coupled 4x4 programmable analog matrix: signed gains, 1 MHz target, BNC I/O, Pico control, KiCad PCB and enclosure CAD.
434 parts - 4 layers65 × 50 mm

Luminometer ADC
czbiohub-sf/portable-luminometer
Software and electronics for the portable SiPM luminometer.
75 parts1BSD-3-Clause - 4 layers86.4 × 68.6 mm

- 4 layers100 × 100 mm

- 4 layers96.2 × 90 mm

TG SAT 24V0 V1.4
spel-uchile/S2_S3_PS_MAG_PCBs
A summary of the different MAG derived PCBs used in SUCHAI 2, SUCHAI 3 and Plansat Satellites
115 parts - 4 layers74.5 × 70.3 mm

Nest mini v2-drop in pcb
iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.
229 parts628CERN-OHL-S-2.0 - 4 layers58.8 × 29 mm

SparkAltBatteryBoardV1
fahreddinaykut/SparkAltBatteryBoard
A custom research-oriented battery interface and telemetry board for the DJI Spark platform, built around a standard 3S LiPo battery pack instead of the discontinued, hard-to-find OEM Smart Battery.
46 parts20
Questions
How big is the Precision Analog Isolation Amplifier PCB?
It measures 63.5 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Precision Analog Isolation Amplifier use?
63 parts, built around the ADA4522-1AR, ADA4899-1YRDZ, HCNR201 and SMAJ15A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Precision Analog Isolation Amplifier KiCad files?
From the KN-NaMi/Precision-Analog-Isolation-Amplifier repository on GitHub, at the commit this page was made from: the board is Precision Analog Isolation Amplifier/Precision Analog Isolation Amplifier.kicad_pcb and its schematic Inverter/Separator_filtr_skladowa_stala.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Precision Analog Isolation Amplifier design in my own project?
Its repository states no licence, so its author keeps all rights: ask KN-NaMi before reusing the design.