
Kicad hx711 tyny85
IvDm/Z-probe-on-smd-resistors-2512
Auto bed level strain gage for 3D printer using resistors 2512 instead of strain gauges.

Custom 2-layer printed circuit board (PCB) design for a portable digital luggage scale, created using KiCad.
Luggage Scale is an open-source printed circuit board by Josse078, from the Josse078/Luggage_scale_pcb repository on GitHub. It is a 2-layer board of 126.4 × 53.3 mm with 7 parts on 33 nets, routed with 66 tracks and 11 vias.
It is built around the HX711. Its parts include 3 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Custom 2-layer printed circuit board (PCB) design for a portable digital luggage scale, created using KiCad.
This project integrates an Arduino microcontroller, load cell amplifier module, OLED display, and a LiPo power management circuit into a compact custom PCB layout.
Luggage_Scale.kicad_sch – Schematic source fileLuggage_Scale.kicad_pcb – PCB layout source file*.gbr – Output Gerber layers (F.Cu, B.Cu, F.Silkscreen, B.Silkscreen, F.Mask, B.Mask, Edge.Cuts)*.drl – Excellon drill files (PTH and NPTH)Luggage_Scale-job.gbrjob – Gerber job fileGerber and drill files are generated and ready for direct upload to PCB fabrication services (JLCPCB, PCBWay, etc.).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 3.7V LiPo Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | HX711 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | OLED Display (0.96" I2C) | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW1 |
| 1 | TP4056 + 5V Boost Module | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Tare Pushbutton | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2 |

IvDm/Z-probe-on-smd-resistors-2512
Auto bed level strain gage for 3D printer using resistors 2512 instead of strain gauges.




szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,

MartinVerges/womolin-waterlevel
DIY project to build a smart fuel sensor for RVs or in other projects. It is based on air pressure and is able to measure fresh water as well as grey and black water levels with high precision.


ikonis/OpenWatts
OpenWatts is a crank-mounted, single-sided cycling power meter built around an ESP32-C3. A bonded strain-gauge bridge and HX711 measure crank torque, while an LSM6DS3 IMU provides cadence and motion wake.
It measures 126.4 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the HX711. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Josse078/Luggage_scale_pcb repository on GitHub, at the commit this page was made from: the board is Luggage_Scale.kicad_pcb and its schematic Luggage_Scale.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Josse078 before reusing the design.