Skip to the content
4 layersMM1 model, the printed circuit board in 3D

This repository contain all homemade standards for the 8bits computer

Copper layers
4
Thickness
1.6 mm
Parts
2
Nets
39
Pads
40
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
10 Jan 2020
Updated
12 Aug 2022

Overview

MM1 model is an open-source printed circuit board by JonathSpirit, from the JonathSpirit/GComputer_standard repository on GitHub, published under the MIT licence. It is a 4-layer board with 2 parts on 39 nets.

It belongs with the retro computing and games and computers and single-board computers boards of this library.

README

README.md

GComputer_standard

Copyright (C) 2020 Guillaume Guillet

Description

This repository contains all homemade standard essentially for my 8bits computer but can be applied for any other purpose.

Actual standards

Processor standards

All processor standards contain documentation with a description, mechanical detail, electrical detail and pins placement.

"Simple Processor Standard"

19.08.2020 SPS1 (revision 3) , documentation here , changelog here
SPS1_image

Motherboard standards

All motherboard standards contain documentation with a description and every model with compatible processor.

"Mother Of Motherboard"

28.09.2020 MOM1_basic (revision 2) , documentation here , changelog here
MOM1_SPS1_image
28.09.2020 MOM1_SPS1 (revision 2) , documentation here , changelog here
MOM1_SPS1_image

Memory standards

All memory standards contain documentation with a description, mechanical detail, electrical detail and pins placement.

"Memory module"

13.08.2020 MM1 (revision 1) , documentation here , changelog here
MM1_PCB_3D_image MM1_PCB_image

Pheripheral standards

All pheripheral standards contain documentation with a description, mechanical detail, electrical detail and pins placement.

"Parallel peripheral"

24.09.2020 PP1 (revision 1) , documentation here , changelog here
PP1_PCB_3D_image PP1_PCB_image

CodeG standards

CodeG is a homemade binary/simple language to be used in a homemade processor like GP8B.

"CodeG_binary"
02.07.2020 CodeG_binary (revision 1)
The binary version is what the processor will read and execute.

"CodeG_simple"
02.07.2020 CodeG_simple (revision 1)
The simple version allows you to write and read code much more simply but must be compiled to be executed by the processor.

Parts

2
QtyValueFootprintReferences
1MM1_addressExtensionConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ2
1MM1_receptacle_5530843-2TE5530843-2:TE_5530843-2J1

More from JonathSpirit/GComputer_standard

6
  • 4 layers203 × 116 mmMOM1 model, the printed circuit board in 3D

    MOM1 model

    JonathSpirit/GComputer_standard

    This repository contain all homemade standards for the 8bits computer

    9 parts3MIT
  • 4 layers203 × 116 mmMOM1 model, the printed circuit board in 3D

    MOM1 model

    JonathSpirit/GComputer_standard

    This repository contain all homemade standards for the 8bits computer

    8 parts3MIT
  • 4 layers133 × 93 mmSPS1 model, the printed circuit board in 3D

    SPS1 model

    JonathSpirit/GComputer_standard

    This repository contain all homemade standards for the 8bits computer

    5 parts3MIT
  • 4 layersPP1 model, the printed circuit board in 3D

    PP1 model

    JonathSpirit/GComputer_standard

    This repository contain all homemade standards for the 8bits computer

    3 parts3MIT
  • 2 layers49.5 × 9 mmMM1 PCB model, the printed circuit board in 3D

    MM1 PCB model

    JonathSpirit/GComputer_standard

    This repository contain all homemade standards for the 8bits computer

    2 parts3MIT
  • 2 layers117.8 × 49 mmPP1 PCB model, the printed circuit board in 3D

    PP1 PCB model

    JonathSpirit/GComputer_standard

    This repository contain all homemade standards for the 8bits computer

    2 parts3MIT

Similar boards

  • 4 layers25 × 35 mmQfn csi underpad diff, the printed circuit board in 3D

    Qfn csi underpad diff

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    2 parts744MIT
  • 4 layers25.7 × 13 mmCpw test, the printed circuit board in 3D

    Cpw test

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    2 parts205
  • 4 layers54 × 16 mmBnc test, the printed circuit board in 3D

    Bnc test

    azonenberg/starshipraider

    Open hardware test equipment

    2 parts193BSD-3-Clause
  • 4 layers94 × 53.4 mmMegaProgrammer, the printed circuit board in 3D

    MegaProgrammer

    clydeshaffer/gametank

    design files for the gametank hardware implementation

    2 parts150
  • 4 layers90.2 × 55.9 mmArduinox86 486 shield, the printed circuit board in 3D

    Arduinox86 486 shield

    dbalsom/arduinoX86

    An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

    2 parts114
  • 4 layers45.3 × 11.8 mmIdeswap, the printed circuit board in 3D

    Ideswap

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    2 parts87
  • 4 layers39.4 × 53.3 mmSAB To RPi, the printed circuit board in 3D

    SAB To RPi

    whollender/SuperAudioBoard

    High quality, 24-bit audio codec board for Teensy 3.x

    2 parts75
  • 4 layers99.7 × 13 mmE Field 10cm, the printed circuit board in 3D

    E Field 10cm

    imendizabal/Near-Field-Probes

    Open Source kit of Near Field Probes for Electromagnetic Compatibility (EMC) troubleshooting

    2 parts59GPL-3.0

Questions

What parts does the MM1 model use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MM1 model KiCad files?

From the JonathSpirit/GComputer_standard repository on GitHub, at the commit this page was made from: the board is MM1/MM1_model/MM1_model.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the MM1 model design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).