

NucleoExpansion
STM32 based robotic car
- Size
- 156.2 × 143.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 123
- Pads
- 425
- Tracks, vias
- 1,727, 132
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 27 Jan 2017
- Updated
- 28 Feb 2017
Overview
NucleoExpansion is an open-source printed circuit board by JiriS97, from the JiriS97/STM32-RoboCar repository on GitHub, published under the MIT licence. It is a 2-layer board of 156.2 × 143.5 mm with 50 parts on 123 nets, routed with 1,727 tracks and 132 vias.
It is built around the ULN2003. Its parts include 16 connectors, 13 resistors, 7 capacitors, 4 ICs and 1 diode. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
1README
README.mdSTM32-RoboCar
All of this work is licensed under the MIT License - please see license.txt for details.
STM32 based robotic car
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole_3.5mm_Pad_Via | Mounting_Holes:MountingHole_3.5mm_Pad_Via | , , , , , |
| 4 | 100n | Capacitors_SMD:C_0805 | C1, C3, C6, C7 |
| 4 | 4k7 | Resistors_SMD:R_0805 | R6, R7, R13, R14 |
| 3 | 10u | Capacitors_SMD:CP_Elec_5x5.7 | C2, C4, C5 |
| 3 | 47k | Resistors_SMD:R_0805 | R3, R4, R5 |
| 3 | LOGO | MikroBus_Logo:MikroBus_Logo | , , |
| 2 | 47K | Resistors_SMD:R_0805 | R1, R2 |
| 2 | CONN_02X35 | Socket_Strips:Socket_Strip_Straight_2x35 | P1, P5 |
| 1 | 10-DOF | Socket_Strips:Socket_Strip_Straight_1x08 | P4 |
| 1 | 100R | Resistors_SMD:R_0805 | R8 |
| 1 | 10R | Resistors_SMD:R_0805 | R11 |
| 1 | 1k | Resistors_SMD:R_0805 | R10 |
| 1 | 3V3 | Diodes_SMD:D_SOD-323 | D1 |
| 1 | 9k1 | Resistors_SMD:R_0805 | R9 |
| 1 | AUDIO/ANALOG | Socket_Strips:Socket_Strip_Straight_1x05 | P7 |
| 1 | FREE_PINS | Socket_Strips:Socket_Strip_Straight_2x18 | P16 |
| 1 | K7803 | Socket_Strips:Socket_Strip_Straight_1x03 | U4 |
| 1 | K7805 | Socket_Strips:Socket_Strip_Straight_1x03 | U3 |
| 1 | LCD | Socket_Strips:Socket_Strip_Straight_1x10 | P6 |
| 1 | LED | Socket_Strips:Socket_Strip_Straight_1x03 | P15 |
| 1 | MIKROBUS1.L | Socket_Strips:Socket_Strip_Straight_1x08 | P8 |
| 1 | MIKROBUS1.R | Socket_Strips:Socket_Strip_Straight_1x08 | P11 |
| 1 | MIKROBUS2.L | Socket_Strips:Socket_Strip_Straight_1x08 | P9 |
| 1 | MIKROBUS2.R | Socket_Strips:Socket_Strip_Straight_1x08 | P12 |
| 1 | MIKROBUS3.L | Socket_Strips:Socket_Strip_Straight_1x08 | P10 |
| 1 | MIKROBUS3.R | Socket_Strips:Socket_Strip_Straight_1x08 | P13 |
| 1 | MOTOR | Socket_Strips:Socket_Strip_Straight_2x15 | P14 |
| 1 | MicroSD_SPI_CD | MicroSD:microsd | U2 |
| 1 | POWER_IN | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P3 |
| 1 | TRANSISTOR_OUT | Socket_Strips:Socket_Strip_Straight_1x10 | P2 |
| 1 | ULN2003 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U1 |
More from JiriS97/STM32-RoboCar
1- 2 layers104.1 × 76.2 mm

Similar boards
- 4 layers99.6 × 76.2 mm

- 2 layers31 × 64 mm

Power driver
jmfriedt/SDR-GB-SAR
Opensource, openhardware implementation of a Software Defined Radio (SDR) Ground Based Synthetic-Aperture RADAR (GB-SAR)
6 parts70 - 2 layers160 × 100 mm

MPCNC Nano Estlcam Shield
tnn85/MPCNC-Nano-Estlcam-Shield
Ein CNC Shield für die MPCNC in Verwendung mit Estlcam
96 parts70 - 2 layers42.5 × 43.2 mm

ElectronicFocuser
jlecomte/ascom-oag-focuser
Open Source ASCOM-Compatible OAG Focuser For Astrophotography
4 parts55MIT - 4 layers100 × 49.8 mm

- 2 layers134 × 91 mm

- 2 layers75 × 60 mm

DUTler V2
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
54 parts23Apache-2.0 - 4 layers76 × 82.5 mm

Nucleo64 CNC
terjeio/CNC_Breakout_Nucleo64
CNC breakout for STM324F411 and ST32F446 development boards
120 parts22
Questions
How big is the NucleoExpansion PCB?
It measures 156.2 × 143.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NucleoExpansion use?
50 parts, built around the ULN2003. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NucleoExpansion KiCad files?
From the JiriS97/STM32-RoboCar repository on GitHub, at the commit this page was made from: the board is Boards/NucleoExpansion v1.0/NucleoExpansion.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NucleoExpansion design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).