Jhertter/Flight-Computer-20251Documentos y código relevantes para el proyecto
SRAD computer is an open-source printed circuit board by Jhertter, from the Jhertter/Flight-Computer-2025 repository on GitHub. It is a 2-layer board of 80 × 90 mm with 71 parts on 81 nets, routed with 987 tracks and 216 vias.
It is built around the RP2040, BME280 and W25Q128JVSIQ, with the MPU-9250 and PTS810SJK250SMTRLFS among its other parts. Its parts include 18 capacitors, 9 resistors, 6 ICs, 5 connectors and 3 diodes. It belongs with the RP2040 boards of this library.
Documentation of SRAD Flight Computer
José Ivan Hertter Ezequiel Diaz Guzmán
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | R | TCLib:R_0805 | R_BL1, R_BL2, R_BME_SCL1, R_BME_SDA1, R_MPU_SCL1, R_MPU_SDA1, R_SAM_SCL1, R_SAM_SDA1, R10, R11, R12, R13 |
| 10 | 100n | Capacitor_SMD:C_0805_2012Metric | C5, C6, C7, C9, C11, C12, C13, C14, C15, C16 |
| 4 | 100n | TCLib:C_0805 | C_BME_VDD1, C_BME_VDDIO1, C_MPU_REG1, C_VDD_MPU1 |
| 4 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4 |
| 3 | 10k | TCLib:R_0805 | R14, R15, R16 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C4, C17 |
| 3 | C | TCLib:C_0805 | C_SAM_VBCKP1, C_SAM_VCC1, C_SAM_VCCIO1 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 3 | PTS810SJK250SMTR_LFS | my_lib:PTS810SJK250SMTRLFS | S1, S2, S3 |
| 2 | 15p | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R5 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C8, C10 |
| 2 | 27 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 1 | 10n | TCLib:C_0805 | C_VDDIO_MPU1 |
| 1 | 10u | TCLib:C_0805 | C18 |
| 1 | 503398-1892 | my_lib:693071010811 | J2 |
| 1 | BME280 | my_lib:PSON65P250X250X100-8N | U4 |
| 1 | Connector_2_Pol | TCLib:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Connector_3_Pol | TCLib:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Crystal | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | DNF | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | LOGO | my_lib:Logo_ITBA | G*** |
| 1 | LOGO | my_lib:Logo_ITBA_rocketry | G*** |
| 1 | MPU-9250 | my_lib:MPU-9250 | U5 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | RP2040 | RP2040_minimal_r2:RP2040-QFN-56 | U3 |
| 1 | SAM-M8Q-0-10 | my_lib:MODULE_SAM-M8Q-0-10 | U6 |
| 1 | Terminal_2 | TCLib:Bornera_2_P5mm | J4 |
| 1 | UJ20-C-H-G-SMT-6-P16-TR | my_lib:SAMESKY_UJ20-C-H-G-SMT-6-P16-TR | J7 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
kartik2406/rp2040-ble
A PCB that uses RP2040 MCU and HM-BT4502 BLE passthrough module. This enables the RP2040 to communicated with other devices using Bluetooth. The bluetooth module is connected via UART(0)
vito-pp/FlightComputer-SRAD-2026
HW and SW documentation of a Student Researched And Developed (SRAD) flight computer in charge of telemetry for ITBA's rocketry team 2026
EE403-CapStone/Design
Case Case BOM Keyboard Module Keyboard BOM NumPad Module NumPad BOM Joystick Module Joystick BOM
vk-sahni/M.2_IMU_sensor_module
KiCad design for an M.2 Key A RP2350B sensor module featuring an MPU-9250 IMU and BME280, intended for UAV and ArduPilot integration experiments.
ShawnHymel/rpi-pico-debugger-shoe
Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.
autonomous-ai/autonomous-circuit
Chat with AI, get a verified PCB and a fab packet you can order.
It measures 80 × 90 mm and has 2 copper layers, 1.6 mm thick.
71 parts, built around the RP2040, BME280, W25Q128JVSIQ and MPU-9250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jhertter/Flight-Computer-2025 repository on GitHub, at the commit this page was made from: the board is SRAD_Design/SRAD_computer.kicad_pcb and its schematic SRAD_Design/SRAD_computer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Jhertter before reusing the design.