
Project NuXT
monotech/NuXT
MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial

Spectravideo SVI318/SVI328 Cartridge
SV3x8-SimpleCart is an open-source printed circuit board by JensRestemeier, from the JensRestemeier/SV3x8-SimpleCart repository on GitHub, published under the MIT licence. It is a 2-layer board of 56 × 62 mm with 7 parts on 29 nets, routed with 250 tracks and 0 vias.
It is built around the 27C256-17/J. Its parts include 2 diodes, 2 connectors, 1 capacitor, 1 resistor and 1 IC. It belongs with the retro computing and games boards of this library.
This is a simple 32kB cartridge for Spectravideo SVI318 and SVI328 computers.

You can preview the KiCad project on KiCanvas. The PCB is based on an original Cross Force cartridge, that was designed for 16kB mask ROMs. Modifying it for 16kB EPROMs would've required a lot of changes, so in the end I decided to design a PCB for a single 32kB EPROM. Two of the /CS signals need to be combined to produce a single /CS signal, in this case I'm using diode logic that seems to be popular on C64 cartridges for a similar purpose. The outline matches an original PCB, so would fit an original shell. If you have a game with broken mask ROMs this is the easiest option to get the game working again. The Gerber files can be sent to a PCB manufacturer of your choice. The default options are usually fine, you can use any soldermask and silkscreen colour you like (this adds some cost!). If you use JLCPCB you can use the "specify location" option to move the production code below the EPROM. The ENIG option adds a chemical gold plating process, and you can enable "Gold Fingers" and bevelling to improve corrosion and wear resistance on the connectors.
The STL directory contains files suitable for 3D printing, either on your own resin or FDM printer or from a service of your choice. It is based on my Cross Force cartridge as well, and reasonably close. I didn't include draft angles, so the STL files are not useful to create injection molds.
SVG labels for a few games are in the label folder. Contributions welcome.
The gray cartridge is an original, the white cartridge is a resin print of a slightly earlier version, the green cartridge is a PLA print.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 27C256 | Package_DIP:DIP-28_W15.24mm | U1 |
| 1 | Cartridge | SV3x8-SimpleCart:svi328_cartridge | J1 |
| 1 | Test | Connector_PinHeader_2.54mm:PinHeader_2x15_P2.54mm_Vertical | J2 |

monotech/NuXT
MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial





hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics


tebl/C64-Kernal-Switcher
Switchless kernal switcher for the common breadbin Commodore 64, "longboards". Reuses power LED for easier use.
It measures 56 × 62 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the 27C256-17/J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JensRestemeier/SV3x8-SimpleCart repository on GitHub, at the commit this page was made from: the board is KiCad/SV3x8-SimpleCart.kicad_pcb and its schematic KiCad/SV3x8-SimpleCart.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).