
Parrot imu
LucienMorey/parrot_imu
This design will host an IMU board for the Parody tripedal robotic platform. It will expose connect an IMU to the teensy 4.1 microcontroller with the ability to deliver this data over CAN bus and over an ethernet…

Pandatron PCB sources
Rat board is an open-source printed circuit board by JavierIH, from the JavierIH/pandatron_hw repository on GitHub. It is a 2-layer board of 84 × 99.8 mm with 53 parts on 56 nets, routed with 456 tracks and 61 vias.
It is built around the STM32F103C8T6, TR05S3V3 and QRE1113. Its parts include 12 capacitors and 10 resistors. It belongs with the STM32 boards of this library.
Hardware for rat
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | QRE1113 | custom-lib:QRE1113GR | IR1, IR2, IR3, IR4, IR5, IR6, IR7, IR8 |
| 6 | MountingHole_2.2mm_M2_ISO7380_Pad | Mounting_Holes:MountingHole_2.2mm_M2_ISO7380_Pad | , , , , , |
| 4 | 47 | Capacitors_SMD:C_0603_HandSoldering | R7, R13, R14, R15 |
| 3 | CONN_01X02 | Socket_Strips:Socket_Strip_Straight_1x02 | BATTERY, MOTOR1, MOTOR2 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C11, C13 |
| 2 | 100 | Capacitors_SMD:C_0603_HandSoldering | R1, R2 |
| 2 | 100k | Capacitors_SMD:C_0603_HandSoldering | R9, R10 |
| 2 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C2, C3 |
| 2 | 10k | Capacitors_SMD:C_0603_HandSoldering | R6, R8 |
| 2 | 10uF | SMD_Packages:SMD-1206_Pol | C12, C14 |
| 2 | 1uF | Capacitors_SMD:C_0603_HandSoldering | C1, C6 |
| 2 | 20p | Capacitors_SMD:C_0603_HandSoldering | C7, C8 |
| 2 | 47k | Resistors_SMD:R_Array_Convex_4x0603 | , |
| 1 | 10nF | Capacitors_SMD:C_0603_HandSoldering | C5 |
| 1 | 4.7uF | Capacitors_SMD:C_0603_HandSoldering | C4 |
| 1 | 8MHz | Crystals:Crystal_HC50-U_Vertical | |
| 1 | CONN_01X08 | Socket_Strips:Socket_Strip_Straight_1x08 | |
| 1 | LED_0 | LEDs:LED_0603 | LED |
| 1 | LED_Power | LEDs:LED_0603 | POWER |
| 1 | START_BUTTON | Buttons_Switches_SMD:SW_SPST_SKQG | START |
| 1 | STM32F103C8T6 | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | |
| 1 | SW_PUSH_SMALL_H | Buttons_Switches_SMD:SW_SPST_SKQG | RESET |
| 1 | TB6612FNG | custom-lib:driver_tuneado | |
| 1 | TR05S3V3 | custom-lib:TR05S3V3 | DC-DC |

LucienMorey/parrot_imu
This design will host an IMU board for the Parody tripedal robotic platform. It will expose connect an IMU to the teensy 4.1 microcontroller with the ability to deliver this data over CAN bus and over an ethernet…



fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG


OPRobots/Yokozunita
Robot minisumo con PCBs, motores fingertech, plomo fundido y stepUp.

project-neon/Esguicho
Neste repositório temos os principais arquivos que usamos para os 3 capítulos, Eletrônica, Mecânica e Software. Segue abaixo uma lista do que temos em cada uma das pastas:

vorlaxen-labs/AratMicro
High-performance, open-source micromouse robot platform built for Robosam and MEB Robot (Ministry of National Education Robotics Competition, Turkey).
It measures 84 × 99.8 mm and has 2 copper layers, 1.6 mm thick.
53 parts, built around the STM32F103C8T6, TR05S3V3 and QRE1113. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JavierIH/pandatron_hw repository on GitHub, at the commit this page was made from: the board is rat_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JavierIH before reusing the design.