

RF24Lights
nRF24L01+ network to control lights
- Size
- 50 × 29 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 24
- Pads
- 132
- Tracks, vias
- 206, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Oct 2015
- Updated
- 26 Aug 2017
Overview
RF24Lights is an open-source printed circuit board by Jarnovat, from the Jarnovat/RF24-lights repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 50 × 29 mm with 59 parts on 24 nets, routed with 206 tracks and 10 vias.
It is built around the ATMEGA328-AU and BSS138. Its parts include 10 resistors, 5 capacitors, 4 transistors, 4 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdRF24-lights
nRF24L01+ network to control lights
More info of the project at:
https://hackaday.io/project/8155-nrf24l01-network-to-control-lights
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistors_SMD:R_0603 | R1, R3, R4, R5, R6 |
| 5 | R | Resistors_SMD:R_0603 | R2, R7, R8, R9, R10 |
| 4 | BSS138 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 2 | C | Capacitors_SMD:C_0603 | C5, C6 |
| 1 | 10uF | PWM_ohjain:TantalC_SizeB_EIA-3528_Reflow_Polar | C11 |
| 1 | 1uF | Capacitors_SMD:C_0603 | C1 |
| 1 | 2,2uF | Capacitors_SMD:C_0603 | C2 |
| 1 | AP2210 | TO_SOT_Packages_SMD:SOT-23 | U1 |
| 1 | ATMEGA328-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | CONN_01X02 | Connectors_Phoenix:PhoenixContact_MSTBA-G_02x5.08mm_Angled | P3 |
| 1 | CONN_01X05 | Connectors_Phoenix:PhoenixContact_MSTBA-G_05x5.08mm_Angled | P4 |
| 1 | CONN_01X08 | PWM_ohjain:nrf24l01_mini | P5 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J1 |
| 1 | LED | LEDs:LED_0603 | D1 |
| 1 | LOGO | PWM_ohjain:OSHW_LOGO | G*** |
The 27 most common of 59 parts.
More from Jarnovat/RF24-lights
1- 2 layers50 × 29 mm

Similar boards
- 2 layers55.6 × 48.8 mm

AAquad PCB
Fberbari/AAquad
(OUTDATED, see AAQuad-Evolution) a baremetal implementation of a multirotor flight computer.
38 partsGPL-3.0 - 2 layers82 × 120 mm

Sample Numeric Keyboard
famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.
66 parts467 - 2 layers76.2 × 76.2 mm

PaperBack Converter
dqydj/PaperBack_EPaper_Display
Internet Connected or Standard Input EPaper Display
92 parts83MIT - 2 layers18 × 33.2 mm

Arduino pro mini
etimou/arduino-pro-mini-kicad
This is a clone of the well known arduino board "pro-mini" designed in kicad while the original was designed in eagle. Ref https://store.arduino.cc/arduino-pro-mini
23 parts69 - 2 layers101.6 × 147.3 mm

Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT - 4 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 70 mm

Questions
How big is the RF24Lights PCB?
It measures 50 × 29 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RF24Lights use?
59 parts, built around the ATMEGA328-AU and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RF24Lights KiCad files?
From the Jarnovat/RF24-lights repository on GitHub, at the commit this page was made from: the board is Kicad/RF24Lights/RF24Lights.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RF24Lights design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).