
Airquality
MorgenWebDigital/airquality
A battery-powered indoor air quality monitor. Real CO₂ from a photoacoustic sensor, VOC and NOx, temperature, humidity and ambient light, shown on a 2.13" e-paper display and sent over Bluetooth LE.

Sensor is an open-source printed circuit board by Jan2121, from the Jan2121/bewaesserung-Sensor repository on GitHub. It is a 2-layer board of 25 × 141.9 mm with 41 parts on 57 nets, routed with 323 tracks and 41 vias.
It is built around the ESP32-C6-MINI-1U-H4, SHT41-AD1B-R2 and DW01A, with the RT9080-33GJ5, TP4056-42-ESOP8 and 0603WAF1002 among its other parts. Its parts include 19 resistors, 6 capacitors, 6 ICs, 2 diodes and 2 transistors. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R5, R12 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R16, R17 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R15 |
| 2 | 10M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
| 2 | 5.1KΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R40, R41 |
| 2 | BSS806N | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2 |
| 2 | LED | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | D1, D2 |
| 1 | 0.33Ohme | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R18 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 2A | Fuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1 |
| 1 | 32.768kHz | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Vertical | LSE1 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | Battery_Cell | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | BT1 |
| 1 | CapaFläche | USBC:CapaFläche | C1 |
| 1 | Conn_01x04_Dupont | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | UART1 |
| 1 | DNE | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | ESP32-C6-MINI-1/U | PCM_Espressif:ESP32-C6-MINI-1 | U7 |
| 1 | RT9080-33GJ5 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | SHT4x | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U3 |
| 1 | SW_Boot | C_Button:SW_SPST_SMD_3x4mm_2Pin | SW1 |
| 1 | TLC555xD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U6 |
| 1 | USB_C | USBC:molex-2169900002 | J1 |
| 1 | ~ | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |

MorgenWebDigital/airquality
A battery-powered indoor air quality monitor. Real CO₂ from a photoacoustic sensor, VOC and NOx, temperature, humidity and ambient light, shown on a 2.13" e-paper display and sent over Bluetooth LE.

tyevco/dial-me-spinner
A Bluetooth dial spinner about 70 mm across, built on the nRF52840. A heavy, balanced stainless flywheel ring spins around a stationary centre that holds a colour OLED and a ring of 48 addressable RGB LEDs.

ZhongWwwHhh/Esp32_High_Quality_Recorder_PCB
PCB design for Esp32_High_Quality_Recorder

cristianchelu/oddware
Personal collection of projects that don't deserve their own repositories.


antsouchlos/commonsense-hw
A BLE-based PCB for measuring humidity and temperature

JonaWe/ummon
ummon (from German Umgebungsmonitor, "environment monitor") is an ESP32-C6 based environmental sensor board with USB-C power.

MorgenWebDigital/airqualitymini
A stationary indoor air quality sensor. Real CO₂, VOC and NOx, temperature and humidity. No display, no battery. Powered from USB-C, read out over Bluetooth LE.
It measures 25 × 141.9 mm and has 2 copper layers, 1.6 mm thick.
41 parts, built around the ESP32-C6-MINI-1U-H4, SHT41-AD1B-R2, DW01A and RT9080-33GJ5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jan2121/bewaesserung-Sensor repository on GitHub, at the commit this page was made from: the board is Sensor.kicad_pcb and its schematic BattProtect.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Jan2121 before reusing the design.