

Jpod v1.0
The script refuses mounted or otherwise in-use disks. Install its Linux tools if needed with sudo apt install util-linux fdisk parted dosfstools udev coreutils findutils gawk (parted provides partprobe).
- Size
- 56.5 × 70.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 46
- Pads
- 75
- Tracks, vias
- 81, 15
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Sep 2026
- Updated
- 31 Oct 2026
Overview
Jpod v1.0 is an open-source printed circuit board by Jake-Eshelman-Portfolio, from the Jake-Eshelman-Portfolio/jpod repository on GitHub. It is a 2-layer board of 56.5 × 70.4 mm with 10 parts on 46 nets, routed with 81 tracks and 15 vias.
It is built around the ESP32-WROVER-E-N16R8. Its parts include 5 switches, 4 resistors and 1 IC. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdjPod Project Summary
Goal
A handheld, music-only player about the size of an iPod Video. Stores 32–64GB of music, has a small screen with menus, a 4-way D-pad plus select, Bluetooth headphones, and a wired 3.5mm jack as backup.
Core design
- Brain: ESP32-WROVER (original ESP32). It has classic Bluetooth for headphone audio, Wi-Fi, and 8MB of extra RAM for buffering.
- Audio: TI TLV320DAC3100 DAC with a built-in headphone amp, feeding a 3.5mm jack.
- Storage: microSD card.
- Screen: 2" ST7789 color display.
- Power: LiPo battery (1500–2500mAh), USB-C charging, battery-level chip.
- Software: Rust on ESP-IDF (
std). Symphonia handles MP3/FLAC decoding and tags.
Features
- Local playback from the SD card, browsing by artist and album.
- Streaming from Navidrome on the Pi over Wi-Fi. Away from home, it reaches the Pi through Tailscale Funnel, protected by a password and a secret token.
- "Find similar": pick a song, and the Pi asks Last.fm for similar tracks, then plays any matches from the library or adds the rest to a wishlist.
- Firmware updates over Wi-Fi.
Decisions
- Start with one ESP32. Add a second one for Bluetooth only if streaming over Wi-Fi while playing through Bluetooth stutters.
- Use a 3.5mm jack instead of USB-C headphones.
- Leave LTE for v2, but reserve a spare UART and power header on v1.
- Skip Spotify's API, since it's too locked down now. Use Last.fm instead.
Plan
- Prototype on a breadboard with a dev kit and breakouts, powered over USB.
- Write the software: playback, UI, Bluetooth, streaming, "find similar".
- Design the custom PCB in KiCad using the same chips.
- Order parts. Separate BOM for schematic based final build and the prototype that will be used to create a test bench.
Prepare an SD Card (Linux/WSL)
-
Insert the card and inspect disks and partitions:
bash lsblk -o NAME,PATH,TRAN,RM,SIZE,MODEL,TYPE,FSTYPE,MOUNTPOINTS -
Identify the removable USB disk by model and capacity. Use the whole-disk path (for example,
/dev/sde), not a partition path such as/dev/sde1. The script erases the whole selected disk and creates one MBR/FAT32 partition; Linux sees the USB reader and cannot prove what media is inserted. -
Ensure
mp3_samples/contains at least one MP3, then run from the repository root, substituting the verified disk path:bash sudo ./helper_scripts/partition_sd_card.sh /dev/sde -
Check the script's printed model, capacity, and partition list carefully. Continue only if they match the SD card you intend to erase, then type the exact confirmation it requests (device path and size in bytes).
-
To check the music on card:
- sudo mkdir -p /mnt/jpod-card
- sudo mount /dev/sde1 /mnt/jpod-card
- ls /mnt/jpod-card/mp3_samples
- sudo umount /mnt/jpod-card
The script refuses mounted or otherwise in-use disks. Install its Linux tools if needed with sudo apt install util-linux fdisk parted dosfstools udev coreutils findutils gawk (parted provides partprobe).
Watch out for
- Wi-Fi and Bluetooth share one radio on the ESP32, so buffer streams aggressively.
- The DAC needs its own 1.8V supply on the custom board.
- The CP2102N USB chip has a long lead time, so buy it early or find a good substitution.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TL3342F160QG_TR | jpod_footprints:SW_TL3342F160QG_TR | SW1, SW2, SW3, SW4, SW5 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 1 | ESP32-WROVER-E-N16R8 | jpod_footprints:ESP32-WROVER-E_EXP | U1 |
Similar boards
- 4 layers305 × 208.3 mm

- 2 layers86.2 × 50.2 mm

MostlyBuildsSpeakerPod
MostlyBuilds/speaker-pod-pcb
This is a PCB design for an ESP32-based speaker controller
93 parts3CC-BY-SA-4.0 - 4 layers128 × 128 mm

SF 01 Compute Board
sandgum/Triangulate-SF_01-Speaker-Frame
A 24 inch Raspberry Pi-based Android digital picture frame attached to a 220W stereo Bluetooth speaker with DSP
369 parts2 - 2 layers85.5 × 85.7 mm

- 4 layers52 × 94.2 mm

Tangara mainboard
dpaola2/Harmony
Current logistics, September 26: core modules are received, and the revision B shells, LCD supports and carrier gauge passed loose fit checks. Screws and foam are ordered. The SD trial playlist is prepared.
124 parts - 2 layers66 × 56 mm

FN32ROV XEBook KiCad
sideburn/fujinet-xebook-kicad
KiCad rebuild of the FujiNet FN32ROV SIO adapter, adapted for internal mounting in an XEBook laptop build
65 partsCERN-OHL-S-2.0 - 4 layers133.2 × 187.2 mm

SparkFun RTK Facet mosaic panelized
sparkfun/SparkFun_RTK_Facet_mosaic
The hardware repository for the designs of the PCBs in the SparkPNT RTK Facet mosaic. This repo also includes the design files for the display and connector boards utilized in our next-generation of Facet GNSS products.
1,383 parts - 2 layers57 × 55.2 mm

LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
Questions
How big is the Jpod v1.0 PCB?
It measures 56.5 × 70.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jpod v1.0 use?
10 parts, built around the ESP32-WROVER-E-N16R8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jpod v1.0 KiCad files?
From the Jake-Eshelman-Portfolio/jpod repository on GitHub, at the commit this page was made from: the board is hardware/KiCAD/jpod-v1.0/jpod-v1.0.kicad_pcb and its schematic hardware/KiCAD/jpod-v1.0/jpod-v1.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jpod v1.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Jake-Eshelman-Portfolio before reusing the design.