Skip to the content
2 layers24.6 × 14 mmServoDriver, the printed circuit board in 3D

A PCB and code for a STM32 servo controller - small.

Size
24.6 × 14 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
25
Pads
81
Tracks, vias
241, 27
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
19 Apr 2020
Updated
27 Sep 2021

Overview

ServoDriver is an open-source printed circuit board by Jak-o-Shadows, from the Jak-o-Shadows/stm32SerialServo repository on GitHub. It is a 2-layer board of 24.6 × 14 mm with 18 parts on 25 nets, routed with 241 tracks and 27 vias.

It is built around the TCAN330D and AP131-33WG. Its parts include 7 capacitors, 3 ICs, 3 connectors, 1 resistor and 1 diode. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

2

README

README.md

stm32SerialServo

A PCB and code for a STM32 servo controller - small.

A tiny (fits on the back of a 9 gram servo fairly neatly) 4 channel servo driver. Serial, with future expansion to CAN. Uses a STM32F042F6P6 for high resolution servo driving.

Parts

18
QtyValueFootprintReferences
3100nFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC3, C5, C7
210nFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC4, C6
220pFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2
2SolderJumper_2_OpenservoDriver:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2
18MHzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSolderingY1
1AP131-33Package_TO_SOT_SMD:SOT-23-5U3
1Conn_01x12servoDriver:PinHeader_3x04_P2.54mm_VerticalJ1
1Conn_02x04_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ2
1LEDLED_SMD:LED_0603_1608MetricD1
1R_SmallResistor_SMD:R_0603_1608MetricR1
1STM32F042F6PxPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU2
1SWDConnector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_VerticalJ3
1TCAN330Package_TO_SOT_SMD:SOT-23-8_HandsolderingU1

Similar boards

  • 4 layers81 × 55 mmRCCAR IF Board GPS, the printed circuit board in 3D

    RCCAR IF Board GPS

    vedderb/rise_sdvp

    The RISE Self-Driving Model Vehicle Platform

    173 parts144GPL-3.0
  • 4 layers35 × 16 mmUSB FT UART OE, the printed circuit board in 3D

    USB FT UART OE

    grkacprzak/USB_FT-UART-OE

    35 partsGPL-3.0
  • 2 layers45 × 45 mmWolfDrive encoder renishaw adapter, the printed circuit board in 3D

    WolfDrive encoder renishaw adapter

    jonblissett/renishaw-aksim-adapters

    PCB and schematic designs for adapting Renishaw encoders for different signalling.

    18 partsGPL-3.0
  • 4 layers35 × 84 mmOshTeledongle, the printed circuit board in 3D

    OshTeledongle

    Kev1n8088/OshTeledongle

    47 parts
  • 2 layers78.7 × 96.3 mmEnlightChildLed, the printed circuit board in 3D

    EnlightChildLed

    ribbley/enlightChildLed

    Small gadget for kids to play with and learn additive color mixing.

    83 partsMIT
  • 2 layers162 × 116 mmLCD panel, the printed circuit board in 3D

    LCD panel

    cscott/rain-barrel

    46 parts
  • 4 layers83 × 100 mmSolar module-1u si, the printed circuit board in 3D

    Solar module-1u si

    oresat/oresat-solar-hardware

    OreSat solar array designs and CAD

    148 parts28
  • 4 layers99.8 × 94.6 mmOresat c3, the printed circuit board in 3D

    Oresat c3

    oresat/oresat-c3-hardware

    C3 (Command, Communication, and Control) our Command and Data Handling (C&DH) card.

    504 parts27

Questions

How big is the ServoDriver PCB?

It measures 24.6 × 14 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ServoDriver use?

18 parts, built around the TCAN330D and AP131-33WG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ServoDriver KiCad files?

From the Jak-o-Shadows/stm32SerialServo repository on GitHub, at the commit this page was made from: the board is servoDriver/servoDriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ServoDriver design in my own project?

Its repository states no licence, so its author keeps all rights: ask Jak-o-Shadows before reusing the design.