

- Size
- 124.5 × 101.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 47
- Pads
- 156
- Tracks, vias
- 212, 3
- Pours
- 144
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Nov 2023
- Updated
- 8 May 2024
Overview
P1.2 is an open-source printed circuit board by JY68-Werable-EEG-Sensor, from the JY68-Werable-EEG-Sensor/Wearable-EEG-Sensor repository on GitHub. It is a 2-layer board of 124.5 × 101.9 mm with 60 parts on 47 nets, routed with 212 tracks and 3 vias.
It is built around the TLV9102ID, INA819ID and TC1044SCOA, with the TPS61094DSS, LTC1059CS#PBF and BHSD-1225-SM among its other parts. Its parts include 22 resistors, 14 connectors, 11 capacitors, 5 ICs and 1 diode.
Main components
7TLV9102ID
SOIC-8-40℃~+125℃ -8V~-1.35V、1.35V~8V 1.1MHz 10pA 110dB 120uA 2 2.7V~16V 28nV/√Hz@10kHz 300uV 4.5V/us 5pA 600nV/℃ 80mA Enable/shutdown function、ESD protection、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierINA819ID
SOIC-8-18V~-2.25V、2.25V~18V -40℃~+125℃ 1 110dB 20mA 2MHz 2nA 350nV/℃ 385uA 4.5V~36V 500pA 6uV 8nV/√Hz@1kHz 9.9V/us Overvoltage protection SOIC-8 Precision Op Amps ROHSTexas InstrumentsInstrumentation AmplifiersTC1044SCOA
SOIC-8-12V~-1.5V 0℃~+70℃ 1.5V~12V 10kHz 160uA 20mA 60Ω 98% Inverted Not supported SOIC-8 Charge Pumps ROHSMicrochip TechnologyDC-DC ConvertersTPS61094DSS
WSON-12-EP(2x3)-40℃~+125℃@(TJ) 1 1MHz 2.7V~5.4V 2A 60nA 700mV~5.5V Boost Buck-Boost External WSON-12-EP(2x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLTC1059CS#PBF
SO-141 2 General Purpose Filter SO-14 Switched Capacitor Filters ROHSAnalog DevicesSwitched Capacitor FiltersBHSD-1225-SM
SMD-40℃~+280℃ SMD Button And Strip Battery Connector ROHSMPDButton And Strip Battery ConnectorDS04-254-1S-01BK
插件,P=2.54mm-40℃~+85℃ 1 2,000 cycles 2.54mm 24V 25mA PC Pin SPST Slide, Rocked 插件,P=2.54mm DIP Switches ROHSCUIDIP Switches
README
README.mdWearable-EEG-Sensor
Overview
Git Repository for JY68 Wearable EEG Sensor Capstone Project Use this repository for:
- Diagrams
- PCB files
- Schematics
- Layouts
- Application codebase
- 3D CAD files
Description
This Project is a novel, wearable, single-channel EEG device and it's associated display application.
Team
Albert, Chris, Connor, Peak, Taher
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2, C4, C5, C6, C11 |
| 4 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R9, R21, R22 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 49.9k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R23, R30 |
| 2 | 0.1uF | Capacitor_THT:C_Rect_L7.0mm_W4.5mm_P5.00mm | C7, C10 |
| 2 | 100k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | R13, R26 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R28, R31 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7 |
| 2 | 68k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3 |
| 2 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J12, J13 |
| 1 | +3.3V | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J3 |
| 1 | -3V3 | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J5 |
| 1 | 0.1uF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C8 |
| 1 | 10nF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C9 |
| 1 | 16k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | 2.2uF | Capacitor_THT:C_Rect_L7.0mm_W4.5mm_P5.00mm | C1 |
| 1 | 2.2uH | B78108S1222K000:INDAD1400W80L920D400 | L1 |
| 1 | 2.49k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 200k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24 |
| 1 | 33uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C3 |
| 1 | 4.75k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 6.98k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R29 |
| 1 | 604 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 8.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | BAT+ | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J10 |
| 1 | BHSD-1225-SM | BHSD-1225-SM:BAT_BHSD-1225-SM | BT1 |
| 1 | BOOST | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J11 |
| 1 | CONDITIONED | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J9 |
| 1 | DS04-254-1S-01BK | DS04_254_1S_01BK:SW_DS04-254-1S-01BK | SW1 |
| 1 | EEG_IN+ | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J2 |
| 1 | EEG_IN- | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J1 |
| 1 | EEG_INPUT | 282837-2:282837-2_TYC | J6 |
| 1 | GND | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J4 |
| 1 | INA819 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | LED_PWR | LED_THT:LED_D5.0mm | D1 |
| 1 | LTC1059CS#PBF | Package_DIP:DIP-14_W7.62mm_LongPads | U5 |
| 1 | STAGE_1_OUT | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J7 |
| 1 | STAGE_2_OUT | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J8 |
| 1 | STAGE_3_OUT | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | J14 |
| 1 | TC1044S | 1-2199298-2:CONN8_1-2199298-2_TEC | U4 |
| 1 | TLV9102 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U3 |
| 1 | TPS61094 | TPS61094DSSR:WSON_94DSSR_TEX | U2 |
More from JY68-Werable-EEG-Sensor/Wearable-EEG-Sensor
3Similar boards
- 6 layers25.4 × 43.2 mm

IoT 2021A
cmcmicrosystems/iot_platform
Compact Bluetooth Low Energy (BLE) sensor node PCB design, firmware and Android app
41 parts5 - 4 layers60 × 40 mm

Ftx
SETIatHCRO/Front-Page
Documentation related to the Allen Telescope Array at the Hat Creek Radio Observatory Wiki Link Below
153 parts5 - 8 layers22.3 × 77.5 mm

Tinker mantis
Tinkerbug-Robotics/TinkerRocket
Model rocket flight computer, ground station, iOS app, and simulation
279 parts1GPL-3.0 - 2 layers70 × 40 mm

Micro affirmations
i-Saac-IV/micro-affirmations
A microcontroller-based affection-giving MACHINE!
167 partsMIT - 2 layers120 × 50 mm

Audioswitch
zehome/autoaudioswitcher
OSHW: Automatic audio input switcher based on audio activity
80 parts10BSD-3-Clause - 2 layers65 × 30 mm

Raspberry Pi Zero W
chukhanhhoang/SoftRoboticSetupFesto
Code for Raspberry Pi and Matlab/Simulink
72 parts14 - 2 layers28 × 53 mm

Ec dlm tr04
kevinisabelle/litdlm01
AVR C Drum Lighting module using XMEGA microcontroller (Includes KiCad PCB)
34 parts - 2 layers35 × 50 mm

Questions
How big is the P1.2 PCB?
It measures 124.5 × 101.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the P1.2 use?
60 parts, built around the TLV9102ID, INA819ID, TC1044SCOA and TPS61094DSS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the P1.2 KiCad files?
From the JY68-Werable-EEG-Sensor/Wearable-EEG-Sensor repository on GitHub, at the commit this page was made from: the board is PCB_design_files/P1.2/P1.2.kicad_pcb and its schematic PCB_design_files/Capstone/Capstone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the P1.2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask JY68-Werable-EEG-Sensor before reusing the design.

