4 layers55.5 × 34.9 mm
4 layers58 × 85 mm
Fatigue Test Board
JJ80901/JJ80901.github.ioMy portfolio website
- Size
- 58 × 85 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 84
- Nets
- 78
- Pads
- 258
- Tracks, vias
- 338, 90
- Pours
- 28
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Dec 2022
- Updated
- 26 Feb 2025
Overview
Fatigue Test Board is an open-source printed circuit board by JJ80901, from the JJ80901/JJ80901.github.io repository on GitHub. It is a 4-layer board of 58 × 85 mm with 84 parts on 78 nets, routed with 338 tracks and 90 vias.
It is built around the MCP6001T-E/OT(MS), TLV62569DBV and HT7533-1, with the REF3033AIDBZT, USBLC6-2SC6 and ACM2012-900-2P-T002 among its other parts. Its parts include 35 capacitors, 25 resistors, 9 ICs, 3 inductors and 2 diodes. It belongs with the STM32 boards of this library.
Main components
7
MCP6001T-E/OT(MS)
SOT-23-5-2.75V~-1.35V、1.35V~2.75V -25℃~+85℃ 1 1.2V/us 1.5MHz 1pA 2.1V~5.5V 28uA 2pA 500uV 650nV/℃ 95dB Built-in compensation、Zero drift / auto-zero Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSMSKSEMIOperational AmplifierTLV62569DBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.5MHz 2.5V~5.5V 2A 600mV~5.5V Adjustable Buck Buck Built-in Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersHT7533-1
SOT-23-5-40℃~+85℃@(Ta) 1 100mA 2.5uA 25mV@(1mA) 3.3V 30V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHOLTEKVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
REF3033AIDBZT
SOT-23-3-40℃~+125℃ 105uVrms 25mA 3.35V~5.5V 3.3V 36uVp-p 42uA 75ppm/℃ Fixed Series ±0.2% SOT-23-3 Voltage Reference ROHSTexas InstrumentsVoltage Reference
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
ACM2012-900-2P-T002
SMD-4P,2x1.2mm-40℃~+85℃ 190mΩ 2 400mA 50V 50V 90Ω@100MHz SMD-4P,2x1.2mm Common Mode Filters ROHSTDKCommon Mode Filters
PESD3V3L1BA,115
SOD-323ESD And Surge Protection (TVS/ESD)HXY MOSFET
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C100, C201, C202, C203, C204, C210, C300, C307, C308, C313, C314 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R101, R102, R104, R300, R306, R308, R309, R310 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C200, C306, C309, C310, C311, C312 |
| 5 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C103, C104, C105, C106, C107 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C101, C102, C206, C207 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 150p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C302, C304, C305 |
| 3 | 56k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R301, R302, R305 |
| 3 | MCP6001T-E/OT | Package_TO_SOT_SMD:SOT-23-5 | U101, U300, U301 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R204, R312 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R202, R203 |
| 2 | 10n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L100, L200 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C208, C209 |
| 2 | 1n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C301, C303 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R200, R201 |
| 1 | 031-5640-1010 | BNC:CONN_73138-5033_MOL | J300 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R103 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R100 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C205 |
| 1 | 10u | Power Inductor:IND_VLS4015CX-100M-H | L101 |
| 1 | 110k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R304 |
| 1 | 11k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R307 |
| 1 | 1332645 | USB-C:PHOENIX_1332645 | J200 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y200 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R205 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R105 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R303 |
| 1 | 49R9 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R311 |
| 1 | ACM2012-900-2P-T002 | CMC:FIL_ACM2012-900-2P-T002 | FL200 |
| 1 | ADC141S626CIMM_NOPB | ADC:SOP50P490X110-10N | U302 |
| 1 | DNP | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C108 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D100 |
| 1 | HT7533-1 | Package_TO_SOT_SMD:SOT-89-3 | U100 |
| 1 | LOGO | LOGO | G*** |
| 1 | PESD3V3L1BA,115 | Diode_SMD:D_SOD-323 | D300 |
| 1 | REF3033AIDBZT | Package_TO_SOT_SMD:SOT-23 | U303 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U200 |
| 1 | SW_Omron_B3FS | Button_Switch_THT:SW_PUSH_6mm | SW200 |
| 1 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U102 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U201 |
More from JJ80901/JJ80901.github.io
2- 2 layers68.6 × 53.4 mm
Similar boards
- 4 layers50 × 70 mm
Nemesis MixSigPCB
abenstirling/SASG
USB-powered, single-channel, low-frequency signal analyser and signal generator
119 parts1 - 2 layers55 × 80 mm
MixedSignalKicad
republicofmakers/HW-KICAD-MCU-STM32-External-ADC-DAC
Mixed Signal Hardware Design with Kicad
125 parts1MIT - 4 layers60 × 75 mm
MixSig PCB
MaheshChowdaryDamuluri/MixSig-PCB
To achieve maximum signal integrity, minimize systemic noise, and prevent cross-talk, the design utilizes a strict hierarchical schematic layout structure and isolates sensitive data conversion components onto…
114 partsMIT - 4 layers41.1 × 72.7 mm
- 4 layers60 × 75 mm
- 4 layers50 × 66 mm
- 4 layers60.1 × 78 mm
MixedSigPCB
cipher8-0/Mixed-Signal_STM32_PCB
A USB-powered mixed-signal board for audio-bandwidth signal generation and analysis. Built around an STM32F1 MCU with a DAC output stage, ADC input, and BNC output — aimed at applications like function generation…
114 parts - 4 layers65 × 75 mm
Questions
How big is the Fatigue Test Board PCB?
It measures 58 × 85 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Fatigue Test Board use?
84 parts, built around the MCP6001T-E/OT(MS), TLV62569DBV, HT7533-1 and REF3033AIDBZT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fatigue Test Board KiCad files?
From the JJ80901/JJ80901.github.io repository on GitHub, at the commit this page was made from: the board is PCBs/FMB/Fatigue Test Board.kicad_pcb and its schematic PCBs/ECESD/GSP RevC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fatigue Test Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask JJ80901 before reusing the design.