
REV0.01 SOJOWS GS MAGMA SPLASH
GroundStudio/GroundStudio_Magma_Splash
GroundStudio Magma Splash

Nuestro propio diseño de la placa de desarrollo stm32 blackpill
STM32F411 JE is an open-source printed circuit board by JABB09, from the JABB09/STM32F411_JE repository on GitHub. It is a 2-layer board of 63.5 × 27.5 mm with 31 parts on 53 nets, routed with 424 tracks and 25 vias.
It is built around the STM32F411CEU6, BAT54C and USB4105-GF-A. Its parts include 11 capacitors, 7 resistors, 4 connectors, 2 ICs and 2 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C6, C7, C8, C12 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 10Ω | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | Conn_01x20_Socket | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J3, J4 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | BOOT, NRST |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 25 Mhz | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm | Y1 |
| 1 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | AP7343 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LOGO | images:logo | G*** |
| 1 | STM32F411CEU6 | STM32F411:QFN50P700X700X60-49N | U1 |
| 1 | Screw_Terminal_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | USB4105-GF-A | USB TYPE C:GCT_USB4105-GF-A | J1 |

GroundStudio/GroundStudio_Magma_Splash
GroundStudio Magma Splash

zPirroZ3007/devboard
Breadboard-friendly STM32F411 development board with USB-C support.

Phil-CIA/Solar-Project-200w
Solar Project 200W is a prototype-first hardware and firmware effort for a 200W-class solar charging system built around a 4S LiFePO4 battery domain.


befinitiv/cmd-z5-pager
Replacement PCB & Software to turn Sony CMD-Z5 into a Meshtastic/Lorawan pager

mlab-modules/LION1CELL02
Single-cell Li-Ion Battery management system with I2C interface


heiso/macrolev
Macrolev is an open source analog keyboard powered by Hall Effect switches
It measures 63.5 × 27.5 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the STM32F411CEU6, BAT54C and USB4105-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JABB09/STM32F411_JE repository on GitHub, at the commit this page was made from: the board is STM32F411_JE/STM32F411_JE/STM32F411_JE.kicad_pcb and its schematic STM32F411_JE/STM32F411_JE/STM32F411_JE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JABB09 before reusing the design.