
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

For hackclub
My keeb is an open-source printed circuit board by ItsHotdogFred, from the ItsHotdogFred/my-keeboard repository on GitHub. It is a 2-layer board of 355.7 × 122 mm with 262 parts on 210 nets, routed with 1,909 tracks and 107 vias.
It is built around the SK6812MINI-E. Its parts include 89 switches and 86 diodes. It belongs with the keyboards and input boards and the RP2040 boards of this library.
A custom TKL-inspired keyboard designed around my own setup and workflow.
Originally built for Hack Club's KEEB event, the project was later moved over to Fabricate.
The case was designed in Onshape
| Item | Description | Qty | Unit Price (NZ$) | Line Total (NZ$) | Link |
|---|---|---|---|---|---|
| 10/100M Electrical Tape | Black Rubber Electrical High-Temperature Resistant tape (10M) | 1 | 7.49 | 7.49 | Link |
| Coiled Keyboard Cable | NNBILI Type C to USB-A Coiled Aviator Keyboard cable | 1 | 14.89 | 14.89 | Link |
| 100pcs/lot IN4148 | 1N4148 diodes in stock | 1 | 3.69 | 3.69 | Link |
| SK6812 MINI-E LED beads | 50-100Pcs full-color LED beads SK6812 3228 built-in IC | 1 | 14.19 | 14.19 | Link |
| EC11 rotary encoder | 5PCS EC11 half/plum blossom shaft 15/20mm with switch | 1 | 3.29 | 3.29 | Link |
| RP2040 dev board | Official Raspberry Pi Pico RP2040 board | 1 | 6.79 | 6.79 | Link |
| PCB mounted screw-in stabilizers | Original Cherry PCB Stabilizers Satellite Axis 7u 6.25u etc. | 1 | 19.79 | 19.79 | Link |
| RGB backlit keycaps | New Gradient Gray Double Shot OEM Profile 135 Key set | 1 | 22.09 | 22.09 | Link |
| Outemu mechanical switches | Dust-Proof Brown 90PCS 3Pin (select Brown + 90pcs) | 1 | 31.19 | 31.19 | Link |
| PCB | PCB for the keyboard | 1 | 47.45 | 47.45 | NO LINK |
| Total | 169.77 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 86 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +70 |
| 84 | SK6812MINI-E | LED_SMD:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | RGB1, RGB2, RGB10, RGB11, RGB12, RGB13, RGB14, RGB15, RGB16, RGB17, RGB18, RGB19, RGB20, RGB21, RGB22, RGB23 +68 |
| 84 | SW_Push | PCM_marbastlib-mx:SW_MX_1u | SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +68 |
| 4 | MX_stab | my-keeb:STAB_MX_P_2u | S1, S3, S4, S7 |
| 2 | EC11 | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | ENC1, ENC2 |
| 1 | MX_stab_6.25u | my-keeb:STAB_MX_P_6.25u | S8 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_THT | A1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.


It measures 355.7 × 122 mm and has 2 copper layers, 1.6 mm thick.
262 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ItsHotdogFred/my-keeboard repository on GitHub, at the commit this page was made from: the board is Kicad/my-keeb.kicad_pcb and its schematic Kicad/my-keeb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ItsHotdogFred before reusing the design.