
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

This repo will be used to for the Hackpad's macropad.
HackPad is an open-source printed circuit board by Im-Sally, from the Im-Sally/Hackclub-macropad repository on GitHub. It is a 2-layer board of 65 × 90 mm with 31 parts on 25 nets, routed with 136 tracks and 3 vias.
It is built around the SK6812MINI-E. Its parts include 11 diodes, 9 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
A small programmable macropad for 3D modelling with 9 buttons, an OLED screen and 2 status LEDs on an external PCB. The OLED is mounted in the lid, so replacing it later is easy I'll just need to desolder four wires and print a new lid. The display connects to the PCB using four wires soldered to the pads located in the top right corner of the board. The 2 LED's are mounted on an small PCB attached to the main PCB with a snap point so it can be separated and connected with wires and put in the lid. I haven't made any firmware for this becuase I can't debug it.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 9 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | GND, GND, LED, SCL, SDL, VCC, VCC, VCC, VSS |
| 2 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D10, D11 |
| 1 | LED | TestPoint:TestPoint_Pad_D2.0mm | LED |
| 1 | XIAO-RP2040-DIP | OPL:XIAO-RP2040-DIP | U1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.


It measures 65 × 90 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Im-Sally/Hackclub-macropad repository on GitHub, at the commit this page was made from: the board is PCB/HackPad.kicad_pcb and its schematic PCB/HackPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Im-Sally before reusing the design.