2 layers71.5 × 60.6 mm
2 layers80.7 × 55.9 mm
Conexion motor DRV8825
IIBM/vibratomo- Size
- 80.7 × 55.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 24
- Pads
- 93
- Tracks, vias
- 256, 25
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 20 Oct 2015
- Updated
- 20 Oct 2015
Overview
Conexion motor DRV8825 is an open-source printed circuit board by IIBM, from the IIBM/vibratomo repository on GitHub. It is a 2-layer board of 80.7 × 55.9 mm with 31 parts on 24 nets, routed with 256 tracks and 25 vias.
It is built around the DRV8825PWP and LM7805. Its parts include 11 resistors, 10 connectors, 7 capacitors, 2 ICs and 1 diode. It belongs with the robots and motor control boards of this library.
Main components
2
DRV8825PWP
HTSSOP-28-EP-40℃~+85℃ 2 2.5A 200mΩ 32 8.2V~45V Bipolar Driver STEP/DIR Yes HTSSOP-28-EP Stepper Motor Driver ROHSTexas InstrumentsStepper Motor Driver
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
31More from IIBM/vibratomo
1Similar boards
- 2 layers220 × 70 mm
Acpm arduino motor part
rtweera/autochess
Fully autonomous chess playing machine with a physical chess board, allowing a human player to compete as if playing against another human, with an ELO rating of 2000.
34 parts - 2 layers100 × 99.8 mm
- 2 layers125 × 125 mm
Diy robotics arm
mathias31415/diy_robotics
Gripper, PCBs and ROS2 software for Six-Axis Robot Arm WE-R2.4 from LoboCNC
34 parts39 - 4 layers20.2 × 14.8 mm
- 4 layers78 × 46 mm
Hydro
o7-machinehum/Hydroponic
Please find the electronics files in the ee folder, all pcb design is done with the open source software KiCad. Is uses an STM32 as the main controller, and an ST L6470 moter driver for the stepper motor.
69 parts5 - 4 layers108.4 × 94 mm
Compact stepper controller
eli3162/diw_printer
Direct ink Writing(DIW) is a technology that enables 3d printers to print many gels, solvents, and other liquids instead of normal plastic filaments.
44 parts3GPL-3.0 - 2 layers
- 2 layers20.6 × 28 mm
Questions
How big is the Conexion motor DRV8825 PCB?
It measures 80.7 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Conexion motor DRV8825 use?
31 parts, built around the DRV8825PWP and LM7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Conexion motor DRV8825 KiCad files?
From the IIBM/vibratomo repository on GitHub, at the commit this page was made from: the board is circuitos en kicad/conexion motor DRV8825/conexion motor DRV8825.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Conexion motor DRV8825 design in my own project?
Its repository states no licence, so its author keeps all rights: ask IIBM before reusing the design.