Skip to the content
2 layersBoard plug, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
25
Pads
65
Tracks, vias
177, 0
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
7 Sep 2017
Updated
7 Sep 2017

Overview

Board plug is an open-source printed circuit board by IBEXcps, from the IBEXcps/HaLiO-hw repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board with 16 parts on 25 nets, routed with 177 tracks and 0 vias.

It is built around the BC548. Its parts include 5 connectors, 4 resistors, 2 ICs, 2 diodes and 1 capacitor. It belongs with the ESP8266 boards of this library.

Main components

1

README

README.md

Hardware design of HaLiO

Use KiCad to open the project.

Parts

16
QtyValueFootprintReferences
2120Resistors_SMD:R_0805_HandSolderingR1, R2
2LEDLEDs:LED_0805D1, D2
11nFCapacitors_THT:C_Disc_D3_P2.5C1
1200Resistors_SMD:R_0805_HandSolderingR5
1620Resistors_SMD:R_0805_HandSolderingR4
1ACS712SMD_Packages:SOIC-8-NU2
1BC548TO_SOT_Packages_THT:TO-92_Inline_Narrow_OvalQ1
1DisplayPin_Headers:Pin_Header_Straight_1x04P1
1ESP-12ESP8266:ESP-12U1
1G5Q-1Relays_THT:Relay_SANYOU_SRD_Series_Form_CRL1
1PINSPin_Headers:Pin_Header_Straight_1x05P4
1PROGRAMPin_Headers:Pin_Header_Straight_2x02P2
1Screw_Terminal_1x02Connectors:bornier2J1
1SerialPin_Headers:Pin_Header_Straight_1x04P3

Similar boards

  • 2 layers178 × 145 mmUltra DB X51 v1, the printed circuit board in 3D

    Ultra DB X51 v1

    ExploreEmbedded/8051_DevelopmentBoard

    Design files and sample code for 8051 development Ultra Boards

    145 parts70
  • 2 layers131.8 × 99.9 mmUps-12v, the printed circuit board in 3D

    Ups-12v

    dilshan/12v-automatic-ups

    12V Automatic UPS system

    77 parts50MIT
  • 4 layers99.6 × 99.8 mm3xosc, the printed circuit board in 3D

    3xosc

    aliqut/3xosc

    3xOsc | 3 VCO Eurorack Module

    92 parts40GPL-3.0
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 2 layers177.8 × 130.8 mmDurango, the printed circuit board in 3D

    Durango

    zuiko21/minimOS

    Scalable OS for 6502/65816

    159 parts23MIT
  • 2 layers236.8 × 169.8 mmTK2000, the printed circuit board in 3D

    TK2000

    clemarfolly/Microdigital-TK2000

    Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II

    212 parts17
  • 2 layers100 × 65.5 mmSodaIDE v2 konami case, the printed circuit board in 3D

    SodaIDE v2 konami case

    Danjovic/Soda-IDE

    8 bit Compact Flash Interface for MSX computers

    30 parts11CC0-1.0
  • 2 layers213 × 130 mmMax48 ISSUE4, the printed circuit board in 3D

    Max48 ISSUE4

    alvaroalea/all-spectrum-clones

    Schematic of a 8bit computer, clone of Sinclair ZX Spectrum

    186 parts10

Questions

What parts does the Board plug use?

16 parts, built around the BC548. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Board plug KiCad files?

From the IBEXcps/HaLiO-hw repository on GitHub, at the commit this page was made from: the board is board_plug.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Board plug design in my own project?

Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).