2 layers341.7 × 195.5 mm
VesselV3
Hy-5/VesselV3
Custom "Vessel" Keyboard - PCB + 3D Case Model + Firmware + Keycaps vector
382 partsMIT
2 layers341.8 × 195.5 mm
VesselV3(USB HS)
Hy-5/VesselV3Custom "Vessel" Keyboard - PCB + 3D Case Model + Firmware + Keycaps vector
- Size
- 341.8 × 195.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 389
- Nets
- 306
- Pads
- 1,443
- Tracks, vias
- 5,002, 324
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 9 Nov 2023
- Updated
- 22 Dec 2024
Overview
VesselV3(USB HS) is an open-source printed circuit board by Hy-5, from the Hy-5/VesselV3 repository on GitHub, published under the MIT licence. It is a 2-layer board of 341.8 × 195.5 mm with 389 parts on 306 nets, routed with 5,002 tracks and 324 vias.
It is built around the STM32F446RET6TR, USB3320C-EZK-TR and 74AUP1G09GW-Q100H, with the ADP223ACPZ-R7, BC51-10PA-QX and PEC12R-3220F-S0024 among its other parts. Its parts include 204 diodes, 36 capacitors, 22 resistors, 4 switches and 1 IC. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
10
STM32F446RET6TR
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 128KB 12bit 12bit 180MHz 32 Bit 50 512KB ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
USB3320C-EZK-TR
QFN-32-EP(5x5)-40℃~+85℃ 1.8V~3.3V 11.1mA 18uA Transceiver USB 2.0 QFN-32-EP(5x5) USB Converters ROHSMicrochip TechnologyUSB Converters
74AUP1G09GW-Q100H
TSSOP-5-1.3mm-40℃~+125℃ 1 2 2V 4.9ns@3V,30pF 450mV 4mA 500nA 74AUP 800mV~3.6V 900mV AND Gate Overvoltage-tolerant input、Local shutdown mode TSSOP-5-1.3mm Logic Gates ROHSNexperiaGates
ADP223ACPZ-R7
LFCSP-8-EP(2x2)-40℃~+125℃@(Tj) 170mV@(300mA) 2 27uVrms 300mA 5.5V 500mV~5V 65uA 70dB@(10kHz) Adjustable Over Current Protection Positive LFCSP-8-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BC51-10PA-QX
-Bipolar (BJT)NexperiaPEC12R-3220F-S0024
插件插件 Rotary Encoders ROHSBournsRotary Encoders
PESD5V0C1BSFYL
DSN0603-2-40℃~+125℃ 0.2pF 1 1nA 5V 6.5V 6V 9A@8/20us Bidirectional ESD IEC 61000-4-2 DSN0603-2 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
PMEG10020ELRX
SOD-123W-65℃~+150℃ 100V 150nA@100V 2A 830mV@2A Independent SOD-123W Schottky Diodes ROHSNexperiaSchottky Diodes
SKQGABE010
SMD-4P,5.2x5.2mm-40℃~+90℃ 1,000,000 cycles 1.5mm 1.6N 12V 5.2mm 5.2mm 50mA Round Button SPST-NO Surface Mount,Vertical SMD-4P,5.2x5.2mm Tactile Switches ROHSALPSALPINETactile SwitchesUSB4800-03-A
SMD-25℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdVessel (rev 1.0)
ISO-FR 75-ish keyboard with I2C OLED, RGB (WS2812B-2020) and rotary encoder
- Keyboard Maintainer: Hy-5 (Ismael Coulibaly)
- Hardware Supported: STM32F446RET6TR
[WIP]
Make example for this keyboard (after setting up your build environment):
qmk compile -kb vessel -km base 2>&1 | ts '%Y-%m-%d %H:%M:%SFlashing example for this keyboard:
A - Initial flashing
1 - Bridge "boot0 to 3v3_1" solder jumper to pull boot0 high
2 - Desolder logic level shifter to keep boot1 pin low
3 - Plug in the keyboard, it will boot in dfu bootloader mode
4 - Use whatever program you prefer, QMK Toolbox, STM32 Programmer, STLink V2 etc.
B - After initial flashing
1 - Keep M12 button (row0, col11) pressed while plugging in the keyboard to launch in bootloader mode
2 - Use QMK Toolbox for flashingSee the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 1 way:
- Bootmagic reset: Hold down the M12 key at ((row0, col11) in the matrix) and plug in the keyboard
Parts
389| Qty | Value | Footprint | References |
|---|---|---|---|
| 102 | 4684 | WS2812BNano4684RGB-3rdParty:4684_ADA | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED100, LED101, LED102 +86 |
| 102 | D_Small | SamacSys_Parts:SODFL3816X120N | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D100, D101, D102 +86 |
| 90 | MX_SW_solder | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX100, MX101, MX102 +74 |
| 14 | 0.1uF | SamacSys_Parts:CAPC1005X55N | C17, C24, C25, C26, C27, C28, C30, C31, C32, C34, C38, C39, C40, C42 |
| 12 | 10k | SamacSys_Parts:RESC2012X50N | R2, R4, R12, R13, R14, R16, R17, R18, R19, R20, R21, R22 |
| 9 | 4.7u | SamacSys_Parts:C0805 | C9, C10, C11, C12, C13, C14, C15, C18, C29 |
| 6 | MX_SW_solder | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.25u | MX79, MX94, MX95, MX96, MX98, MX99 |
| 4 | MountingHole | MountingHole:MountingHole_5.5mm | H1, H3, H4, H5 |
| 3 | 0.01u | SamacSys_Parts:CAPC1005X56N | C36, C37, C41 |
| 3 | 1u | SamacSys_Parts:CAPC2012X140N | C43, C44, C45 |
| 2 | 0.1u | SamacSys_Parts:C0805 | C3, C8 |
| 2 | 2.2uF | SamacSys_Parts:CAPC1608X90N | C16, C35 |
| 2 | 20pF | SamacSys_Parts:C0603 | C1, C2 |
| 2 | 5.1 kOhms | SamacSys_Parts:RESC1005X40N | R1, R15 |
| 2 | MX_SW_solder | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.75u | MX64, MX91 |
| 2 | MX_stab | PCM_Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_2.00u | S1, S2 |
| 1 | 10 | SamacSys_Parts:RESC2012X50N | R26 |
| 1 | 10uF | SamacSys_Parts:CAPC2012X140N | C33 |
| 1 | 15 | SamacSys_Parts:RESC2012X50N | R24 |
| 1 | 1k | SamacSys_Parts:RESC5025X65N | R7 |
| 1 | 22 | SamacSys_Parts:RESC2012X50N | R11 |
| 1 | 25MHz | SamacSys_Parts:ATS25ASM1E | Y1 |
| 1 | 320 | Resistor320O:RESC1005X40N | R10 |
| 1 | 39 | SamacSys_Parts:RESC2012X60N | R23 |
| 1 | 4392 | SamacSys_Parts:4392 | JSTPH4-PIN1 |
| 1 | 500mA | SamacSys_Parts:1206L05015YR | Polyfuse1 |
| 1 | 56 | SamacSys_Parts:RESC2012X50N | R25 |
| 1 | 5VOutput_VoltageRegulator | SamacSys_Parts:TO228P972X240-3N | (LF50ABDT-TR)-IC3 |
| 1 | 74AUP1G09GW-Q100H | SamacSys_Parts:SOT65P212X110-5N | (AND_Gate)IC6 |
| 1 | 8.06k | SamacSys_Parts:RESC2012X60N | R5 |
| 1 | ADP223ACPZ-R7 | SamacSys_Parts:SON50P200X200X65-9N-D | DualOutputLinearReg_IC1 |
| 1 | BC51-10PA-QX | SamacSys_Parts:BC55PASQX | PNPTransistor1 |
| 1 | JTAG/SWD 10pins Headers | SamacSys_Parts:HUSSP10W40P127_2X5_635X340X420P | J1 |
| 1 | MX_SW_solder | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.50u | MX48 |
| 1 | MX_SW_solder | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_ISOEnter | MX61 |
| 1 | MX_SW_solder | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_2.00u | MX45 |
| 1 | MX_SW_solder | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_6.25u | MX97 |
| 1 | MX_stab | PCM_Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_6.25u | S3 |
| 1 | MountingHole | MountingHole:MountingHole_6.5mm | H2 |
| 1 | On/On SPDT | SPDTSlide:SW_L102021ML04Q | S6 |
| 1 | PEC12R-3220F-S0024 | SamacSys_Parts:PEC12R3220FS0024 | Rotary_Encoder(20mm)_S4 |
| 1 | PESD5V0C1BSFYL | SamacSys_Parts:PMEG3005AESFYL | TVSDiode/ESDSuppr1 |
| 1 | PMEG10020ELRX | SamacSys_Parts:SODFL3517X110N | Schottky/ReversPolProtec1 |
| 1 | SKQGABE010 | SamacSys_Parts:SKQGAKE010 | USB3320_ResetSwitch1 |
| 1 | STM32F446RET6TR | SamacSys_Parts:QFP50P1200X1200X160-64N | MCU1 |
| 1 | TXB0104PWR | SamacSys_Parts:SOP65P640X120-14N | (BidirectionalLogicLevelShifter)IC4 |
| 1 | USB3320C-EZK-TR | SamacSys_Parts:QFN50P500X500X100-33N-D | IC1 |
| 1 | USB4800-03-A | SamacSys_Parts:USB480003A | USB-C1 |
More from Hy-5/VesselV3
1Similar boards
- 2 layers64.1 × 51.3 mm
Schematic monitor
Martins-Lucaas/PRJ-SEMB
Repositório criado para o projeto final da disciplina da SISTEMAS EMBARCADOS da UFU
64 parts1 - 6 layers46.5 × 47.2 mm
NAVCORE SoOP
kfilipekk/iridium_drone
STM32H743 flight controller that navigates without GPS from Iridium satellite Doppler
217 parts2MIT - 4 layers254.3 × 169.3 mm
- 4 layers74.9 × 243.5 mm
- 2 layers160.7 × 100.3 mm
- 4 layers56 × 64 mm
- 2 layers14.1 × 17.3 mm
- 2 layers391.2 × 166.5 mm
Takt11800
vuckale/takt11800
Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA
284 parts12CERN-OHL-S-2.0
Questions
How big is the VesselV3(USB HS) PCB?
It measures 341.8 × 195.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VesselV3(USB HS) use?
389 parts, built around the STM32F446RET6TR, USB3320C-EZK-TR, 74AUP1G09GW-Q100H and ADP223ACPZ-R7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VesselV3(USB HS) KiCad files?
From the Hy-5/VesselV3 repository on GitHub, at the commit this page was made from: the board is VesselV3(USB_HS).kicad_pcb and its schematic VesselV3(USB_HS).kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VesselV3(USB HS) design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).