4 layers82.6 × 82.5 mm
2 layers36.5 × 36.6 mm
RP2040 minimal
Hugoyhu/rp2040module1RP2040 Module. Based off Raspberry PI Foundation's schematics.
- Size
- 36.5 × 36.6 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 36
- Nets
- 51
- Pads
- 212
- Tracks, vias
- 435, 44
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Mar 2021
- Updated
- 27 Mar 2021
Overview
RP2040 minimal is an open-source printed circuit board by Hugoyhu, from the Hugoyhu/rp2040module repository on GitHub. It is a 2-layer board of 36.5 × 36.6 mm with 36 parts on 51 nets, routed with 435 tracks and 44 vias.
It is built around the RP2040, W25Q128JVSIQ and ABLS-12.000MHZ-B4-T. Its parts include 17 capacitors, 8 connectors, 5 resistors, 3 ICs and 2 switches. It belongs with the RP2040 boards of this library.
Main components
3
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
ABLS-12.000MHZ-B4-T
HC-49S-SMD-20℃~+70℃ 12MHz 18pF 50Ω ±30ppm ±50ppm HC-49S-SMD Crystals ROHSAbraconCrystals
README
README.mdrp2040module
RP2040 Module. Based off Raspberry PI Foundation's schematics.
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C9, C11, C12, C13, C14, C15, C16 |
| 8 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J1, J3, J4, J5, J6, J7, J8, J9 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C4, C17 |
| 2 | 1k | Capacitor_SMD:C_0402_1005Metric | R1, R5 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 27 | Capacitor_SMD:C_0402_1005Metric | R3, R4 |
| 2 | 27p | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | ABLS-12.000MHZ-B4-T | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | DNF | Capacitor_SMD:C_0402_1005Metric | R2 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RP2040 | RP2040_minimal:RP2040-QFN-56 | U3 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
Similar boards
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 2 layers99.1 × 72.9 mm
- 2 layers475 × 139.9 mm
Skogaslider main pcb
skogaby/skogaslider
Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience
175 parts18MIT - 2 layers30.1 × 65.1 mm
RPi 0 RP2040
Hugoyhu/Pico2040ZeroW
Raspberry Pi Form Factor, RP2040, Wireless support with ESP-01
46 parts7Apache-2.0 - 2 layers210.1 × 98.3 mm
Granola trailmix
michaelswitzer/granola-trailmix
The TrailMix is a low-cost professional grade button box style arcade controller.
48 parts6MIT - 2 layers64 × 48.4 mm
Rp2040-ble
kartik2406/rp2040-ble
A PCB that uses RP2040 MCU and HM-BT4502 BLE passthrough module. This enables the RP2040 to communicated with other devices using Bluetooth. The bluetooth module is connected via UART(0)
42 parts5 - 4 layers188 × 71.8 mm
Combo board
bikeNomad/fluke_884x_continuity_buzzer
Add-in continuity buzzer for the Fluke 8840A and 8842A multimeters using an RP2040 microcontroller
84 parts4MIT
Questions
How big is the RP2040 minimal PCB?
It measures 36.5 × 36.6 mm and has 2 copper layers, 1 mm thick.
What parts does the RP2040 minimal use?
36 parts, built around the RP2040, W25Q128JVSIQ and ABLS-12.000MHZ-B4-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RP2040 minimal KiCad files?
From the Hugoyhu/rp2040module repository on GitHub, at the commit this page was made from: the board is RP2040_minimal.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RP2040 minimal design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hugoyhu before reusing the design.