

Wires stop mod
遠隔非常停止の設計
- Size
- 85.1 × 47.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 26
- Pads
- 142
- Tracks, vias
- 671, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Aug 2024
- Updated
- 23 Jul 2026
Overview
Wires stop mod is an open-source printed circuit board by Hori296, from the Hori296/wireless_stop_mod repository on GitHub. It is a 2-layer board of 85.1 × 47.5 mm with 34 parts on 26 nets, routed with 671 tracks and 10 vias.
It is built around the ESP32-C3-WROOM-02U-N4, L7812 and TLP130GBF, with the XT60PW-M and RSJ400N10TL among its other parts. Its parts include 9 capacitors, 7 resistors, 5 diodes, 5 connectors and 3 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5ESP32-C3-WROOM-02U-N4
SMD-19P-40℃~+85℃ -98dBm 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 Chip UART、SPI、I2C、I2S、JTAG、USB SMD-19P WiFi Modules ROHSEspressif SystemsWiFi ModulesL7812
TO-220ST0℃~+125℃@(Tj) 1 1.2A 12V 2V@(1A) 30V 71dB@(120Hz) 76uV Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTLP130GBF
SOIC-5-175mil-25℃~+85℃ 1 1.15V 100% 10mA 200mW 25mA 2us 3.75kV 3us 400mV@0.2mA,1mA 600% 80V AC,DC Phototransistor SOIC-5-175mil Transistor, Photovoltaic Output Optoisolators ROHSToshibaTransistor, Photovoltaic Output OptoisolatorsXT60PW-M
-Horizontal plug Yellow - Power connector / plug connector ROHSChangzhou Amass ElecPlugRSJ400N10TL
TO-263S-55℃~+150℃ 1 N-channel 100V 180pF 2.5V 270pF 27mΩ@10V 3.6nF 40A 50W 90nC@10V TO-263S MOSFETs ROHSROHM SemiconductorMOSFETs
README
readme.mdロボコン部用の遠隔非常停止用回路
ファイルの置き場所とか適当だったから,MDDのテスト用回路の設計プロジェクトの中に遠隔非常停止用回路の設計がある ??
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C9 |
| 3 | D | Diode_SMD:D_SOD-128 | D1, D2, D5 |
| 2 | 10K | Capacitor_SMD:C_0603_1608Metric | R1, R2 |
| 2 | 330u | Capacitor_SMD:CP_Elec_10x10 | C7, C8 |
| 2 | 47u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 2 | XT60PW-M | Connector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J3, J5 |
| 1 | 10 | Capacitor_SMD:C_0603_1608Metric | R7 |
| 1 | 100 | Capacitor_SMD:C_0603_1608Metric | R5 |
| 1 | 1K | Capacitor_SMD:C_0603_1608Metric | R6 |
| 1 | 1k | Capacitor_SMD:C_0603_1608Metric | R3 |
| 1 | 550 | Capacitor_SMD:C_0603_1608Metric | R4 |
| 1 | BOOT | Button_Switch_THT:SW_PUSH-12mm | SW1 |
| 1 | ESP32-C3-WROOM-02U | RF_Module:ESP32-C3-WROOM-02U | ESP32 |
| 1 | L7812 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | LP2950-3.3_TO252 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | RESET | Button_Switch_THT:SW_PUSH-12mm | SW2 |
| 1 | RSJ400N10 | Package_TO_SOT_SMD:TO-263-2 | Q1 |
| 1 | TLP130 | Package_SO:MFSOP6-5_4.4x3.6mm_P1.27mm | U4 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J1 |
| 1 | XT60PW-M | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J4 |
| 1 | XT60PW-M | Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | J2 |
| 1 | ~ | XS-506:XS-506A | ヒューズ111 |
More from Hori296/wireless_stop_mod
1- 2 layers

Similar boards
- 2 layers

- 4 layers76.6 × 25.1 mm

- 4 layers70 × 70 mm

CloudSmoker ver2f
cwgstreet/cloudSmoker
ESP32 wifi enabled quad temperature probe device to monitor bbq meat / pit temperatures with wireless cloud data logging for remote monitoring and push alert notifications
115 parts24 - 4 layers82 × 68.9 mm

- 4 layers45 × 23 mm

DCAN Distribution Board v1.1
abeednaz/R56-Mini-MFD
Multi function display for R56 MINI Cooper
33 parts1 - 6 layers16 × 35 mm

- 4 layers100 × 85 mm

Projected negative
hicancan/carbentra-smart-plug
CARBENTRA smart plug: AIoT edge device for campus energy orchestration
105 parts1AGPL-3.0 - 2 layers70 × 50 mm

Questions
How big is the Wires stop mod PCB?
It measures 85.1 × 47.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wires stop mod use?
34 parts, built around the ESP32-C3-WROOM-02U-N4, L7812, TLP130GBF and XT60PW-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wires stop mod KiCad files?
From the Hori296/wireless_stop_mod repository on GitHub, at the commit this page was made from: the board is MDD_test/wires_stop_mod/wires_stop_mod.kicad_pcb and its schematic MDD_test/MDD_test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wires stop mod design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hori296 before reusing the design.