2 layers65.5 × 59.4 mm
1wire-4switch
InfernoEmbedded/onewire-softdevice
Software, Firmware & Documentation is licensed under GPLv3
18 parts11
2 layers82.6 × 95.3 mm
Hive access pcb
Hive13/hive13-access-pcbKiCad files for the circuit board that controls doors.
- Size
- 82.6 × 95.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 40
- Pads
- 151
- Tracks, vias
- 432, 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 May 2018
- Updated
- 6 Jun 2018
Overview
Hive access pcb is an open-source printed circuit board by Hive13, from the Hive13/hive13-access-pcb repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 82.6 × 95.3 mm with 47 parts on 40 nets, routed with 432 tracks and 3 vias.
It is built around the DS18B20, LM2576S-5.0 and DS2408S. Its parts include 13 resistors, 9 connectors, 6 capacitors, 6 transistors and 4 ICs.
Main components
3
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
LM2576S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 3A 4V~40V 52kHz 5V 5mA Buck Built-in Fixed No Step-down type TO-263-5 DC-DC Converters ROHSSlkorDC-DC Converters
DS2408S
SOIC-16SOIC-16 Signal Switches, Multiplexers, DecodersMaxim Integrated (Analog Devices)Signal Switches, Multiplexers, Decoders
README
README.mdhive13-access-pcb
KiCad files for the circuit board that controls doors.
Board Design
This board is designed so that it can be sent to a fab house and done dual-layer, or milled with a CNC, single-sided, and done in the "jumper links" style. This results in several constraints:
- The top-side PCB traces need to both be in a straight line and not cross over any top-side components.
- All surface-mount components need to be on the bottom layer.
- No vias under bottom-side components.
- Assume that there will be no bottom-side solder mask. Take this into account when running traces under a bottom-side component.
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10kΩ | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R7, R10, R11, R12, R13 |
| 4 | 2N7000 | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q2, Q3, Q5, Q6 |
| 2 | 1000MFD | Capacitors_THT:CP_Radial_D13.0mm_P5.00mm | C3, C5 |
| 2 | 1MFD | Capacitors_THT:CP_Radial_D5.0mm_P2.00mm | C1, C4 |
| 2 | 1N4002 | Diodes_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D3 |
| 1 | 1.2kΩ | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 100MFD | Capacitors_THT:CP_Radial_D12.5mm_P5.00mm | C2 |
| 1 | 1MFD | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C6 |
| 1 | 1kΩ | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 2N2222 | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q1 |
| 1 | 2N3906 | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q4 |
| 1 | 4.7kΩ | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | DS18B20 | TO_SOT_Packages_THT:TO-92_Molded_Narrow | U2 |
| 1 | DS2408 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U3 |
| 1 | D_Schottky | Diodes_THT:D_DO-201AD_P12.70mm_Horizontal | D2 |
| 1 | Door Closed Sensor | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | P3 |
| 1 | Door Latch Solenoid Out | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | P1 |
| 1 | Door Reader | RJ-45:RJ45_SHIELD | J1 |
| 1 | Exit Sensor | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_4pol | J6 |
| 1 | External Reset | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | P2 |
| 1 | L | Inductor:L_Radial_D21.0mm_P7.5mm | L1 |
| 1 | LM2576S-5 | TO_SOT_Packages_SMD:TO-263-5_TabPin3 | U1 |
| 1 | Power In | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | J5 |
| 1 | Relay Mode Select | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | Relay Voltage Select | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | SANYOU_SRD_Form_C | Relays_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | Snub Enable | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | WeMos_mini | wemos_d1_mini:D1_mini_board | U4 |
The 43 most common of 47 parts.
Similar boards
- 2 layers80.3 × 54.9 mm
SmartDoor
bgerp/ztm_doc
This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.
41 parts - 2 layers46.5 × 65 mm
Cave
VectorSpaceHQ/Cave
An open source, low-cost, Raspberry Pi powered, smart thermostat.
31 parts4GPL-3.0 - 2 layers62.9 × 47 mm
ESP32 CAN
FL0WL0W/ESP32C3-CAN-Extender
This module uses an ESP32C3 with WiFi and BLE. It has 3 configurable outputs (5V push pull, Open Drain, 12V pullup), 4 analog or digital inputs, CAN transceiver, and an automotive power supply so it can be installed…
72 parts20GPL-3.0 - 4 layers133.1 × 126.6 mm
- 2 layers85 × 56 mm
- 2 layers172.2 × 82.8 mm
- 2 layers111.4 × 88.4 mm
MAZEBLAZE V3
SurajSonawane2415/MazeBlaze
Developed a Line following and Maze Solving bot based on PID controller which can find the shortest path in a given maze.
42 parts2
Questions
How big is the Hive access pcb PCB?
It measures 82.6 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hive access pcb use?
47 parts, built around the DS18B20, LM2576S-5.0 and DS2408S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hive access pcb KiCad files?
From the Hive13/hive13-access-pcb repository on GitHub, at the commit this page was made from: the board is hive_access_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hive access pcb design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).