
Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

Power pcb is an open-source printed circuit board by Hexobot-SLSC, from the Hexobot-SLSC/robot-power-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.8 × 81.8 mm with 9 parts on 7 nets, routed with 31 tracks and 0 vias.
It is built around the XL4015E1 and XT60-M. Its parts include 6 connectors, 2 ICs and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ARD_Terminal | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_Horizontal | J2 |
| 1 | DTD302-V2 | Converters_DCDC_Custom:DTD302-V2 | U2 |
| 1 | ESB_Terminal | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_Horizontal | J5 |
| 1 | G5Q-1 | Relay_THT:Relay_SPDT_Omron-G5Q-1 | K2 |
| 1 | MTR1_Terminal | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_Horizontal | J3 |
| 1 | MTR2_Terminal | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_Horizontal | J4 |
| 1 | SRV_Terminal | Connector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_Horizontal | J6 |
| 1 | XL4015 | Converters_DCDC_Custom:L2596S | U3 |
| 1 | XT60-M | Connectors_Custom:AMASS_XT60-M | J1 |

GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.



jamwaffles/optiplower
Power a Dell Optiplex 3050 Micro from a 24V industrial power supply

SRA-VJTI/Evo-Borne
This repository focuses on building an open-source morphobot.

wenzel-lab/syringe-pumps-and-controller
Design of 3d printable syringe pumps and dual controller.


It measures 99.8 × 81.8 mm and has 2 copper layers, 1.64 mm thick.
9 parts, built around the XL4015E1 and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Hexobot-SLSC/robot-power-pcb repository on GitHub, at the commit this page was made from: the board is src/power-pcb.kicad_pcb and its schematic src/power-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).