

Power Board
The TocoSat power board hardware and software files
- Size
- 42 × 42 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 81
- Pads
- 337
- Tracks, vias
- 731, 96
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Jul 2026
- Updated
- 18 Aug 2026
Overview
Power Board is an open-source printed circuit board by Harveyn4444, from the Harveyn4444/TocoSat-powerboard repository on GitHub. It is a 4-layer board of 42 × 42 mm with 74 parts on 81 nets, routed with 731 tracks and 96 vias.
It is built around the ADS1115IDGSR, STLM75DS2F and BQ25186, with the BSMD1206-110-30V, S2B-PH-K-S(LF)(SN) and VLS3015CX-2R2M-1 among its other parts. Its parts include 22 resistors, 19 capacitors, 11 ICs, 4 diodes and 1 transistor.
Main components
12ADS1115IDGSR
VSSOP-10-40℃~+125℃ 16 1LSB 2 2.048V 2V~5.5V 500nA 860Hz 8Hz、16Hz、32Hz、64Hz、128Hz、250Hz、475Hz、860Hz Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)STLM75DS2F
MSOP-8-55℃~+125℃ 150ms 2.7V~5.5V 9bit I2C、SMBus ±2℃ MSOP-8 Temperature Sensors ROHSSTMicroelectronicsTemperature SensorsBQ25186
DFN-10_2x2.2mmDFN-10_2x2.2mm New Arrivals ROHSTexas InstrumentsUncategorisedBSMD1206-110-30V
1206-40℃~+85℃ 1.1A 1W 2.2A 270mΩ 300ms 30V 40A 40mΩ 1206 Resettable Fuses ROHSBHFUSEResettable FusesS2B-PH-K-S(LF)(SN)
弯插,P=2mm-25℃~+85℃ 1 100V 1x2P 2 2A 2P 2mm 4.8mm 5.9mm 7.6mm Brass K Pin PA66 PH Right Angle Tin UL94V-0 White 弯插,P=2mm Wire To Board Connector ROHSJSTWire To Board ConnectorVLS3015CX-2R2M-1
SMD,3x3mm1.71A 2.2uH 2.65A 64mΩ Magnetic Shielded Inductor ±20% SMD,3x3mm Power Inductors ROHSTDKPower InductorsPZ254R-11-02P
弯插,P=2.54mm-40℃~+105℃ 1 1x2P 2.54mm 2.5mm 250V 2P 3A 6mm Black Brass Pin Header Right Angle 弯插,P=2.54mm Pin Headers ROHSXFCNPin HeadersNCP18XH103F03RB
0603-40℃~+125℃ 0.8mm 1.6mm 100mW 10kΩ 1mW/℃ 310uA 3380K 3434K 3455K ±1% ±1% 0603 NTC Thermistors ROHSMurataNTC Thermistors10118194-0001LF
SMD-30℃~+80℃ 1 100V 5P Black Female Micro-B USB 2.0 SMD USB Connectors ROHSAmphenolUSB ConnectorsBAT54J
SOD-323F1 Independent 200mA 2uA@25V 30V 600mA 800mV@100mA SOD-323F Schottky Diodes ROHSNexperiaSchottky DiodesBZX84-C12,215-JSM
SOT-23-65℃~+150℃ 1 Independent 100nA@8V 11.4V~12.7V 12V 150Ω 25Ω 350mW SOT-23 Zener Diodes ROHSJSMSEMIZener DiodesCR2010F100KE04
20102010 Chip Resistor - Surface Mount ROHSEver Ohms TechnologyChip Resistor - Surface Mount
README
README.mdTocoSat Power Board
TocoSat is a 1P PocketQube. TocoSat is based upon the PQ60 standard with a custom connector pinout and connections.
project layout/overview
.
├── assets
│ ├── datasheets
│ └── images
├── hardware
│ ├── hardware.md
│ ├── kicad
│ └── production-files
└── README.md
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11 |
| 7 | 100nF 0603 | Capacitors:C_0603 | C3, C8, C12, C13, C16, C20, C22 |
| 6 | 10K 0603 | Resistors:R_0603 | R2, R3, R16, R28, R29, R31 |
| 4 | 10uF 0805 | Capacitors:C_0805 | C2, C4, C10, C15 |
| 4 | 22uF 0805 | Capacitors:C_0805 | C6, C11, C17, C18 |
| 3 | 1uF 0603 | Capacitors:C_0603 | C1, C7, C21 |
| 3 | 4.7K 0603 | Resistors:R_0603 | R7, R13, R15 |
| 3 | PZ254R-11-02P | Male-1x2-2.54:Male-1x2-2.54 | H1, H2, H3 |
| 2 | 100K 0603 | Resistors:R_0603 | R26, R27 |
| 2 | NCP18XH103F03RB | NCP18XH103F03RB:R0603 | R1, R17 |
| 1 | 0 0603 | Resistors:R_0603 | R14 |
| 1 | 1.5K 0603 | Resistors:R_0603 | R8 |
| 1 | 100 0603 | Resistors:R_0603 | R25 |
| 1 | 10118194-0001LF | microusb:MICRO-USB-SMD_10118194-0001LF | USB2 |
| 1 | 15K 0603 | Resistors:R_0603 | R12 |
| 1 | 1uF 0805 | Capacitors:C_0805 | C9 |
| 1 | 2.2K 0603 | Resistors:R_0603 | R11 |
| 1 | 47K 0603 | Resistors:R_0603 | R4 |
| 1 | 55K 0603 | Resistors:R_0603 | R30 |
| 1 | 62 0603 | Resistors:R_0603 | R32 |
| 1 | ADS1115IDGSR | ADS1115IDGSR:ADS1115IDGSR | U3 |
| 1 | APX803L05-32SA-7 | APX803L05-32SA-7:SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | U12 |
| 1 | BAT54J | Diode_SMD:D_SOD-323F | D3 |
| 1 | BQ25186 | BQ25186:WSON-10_L2.2-W2.0-P0.40-BL-EP_TI_DLH0010A | U1 |
| 1 | BSMD1206-110-30V | BSMD1206-110-30V:F1206 | U13 |
| 1 | BZX84-C12_215 | BZX84_C12_215:SOT95P230X110-3N | D2 |
| 1 | CJ2301 S1 | CJ2301:SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR | Q1 |
| 1 | CR2010F100KE04 | Resistors:R_2010 | R6 |
| 1 | INA260 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U5 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO | LOGO | G*** |
| 1 | RED LED 06033 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | S2B-PH-K-S(LF)(SN) | JST-1x2-2.00-90:JST-1x2-2.00-90 | U4 |
| 1 | STLM75DS2F | STMLM75D2SF:MSOP-8_L3.0-W3.0-P0.65-LS4.9-BL | U7 |
| 1 | TPS22810DBVR | TPS22810DBVR:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U2 |
| 1 | TPS22918DBVR | TPS22918:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U14 |
| 1 | TPS63001DRCR | TPS63001DRCR:VREG_V62_16624-01YE | U11 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP2 |
| 1 | TestPoint_Alt | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | TestPoint_Alt | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1 |
| 1 | VLS3015CX-2R2M-1 | VLS3015CX-2R2M-1:IND-SMD_L3.0-W3.0_VLS3012CX | U10 |
| 1 | ~ | PQ60:PQ60_Outline_Conn | J4 |
Similar boards
- 2 layers81.4 × 64.3 mm

- 4 layers145 × 57 mm

- 4 layers65 × 56.5 mm

HAT+
cvaldess/Rpi3FanHatPlus
Raspberry Pi 5 HAT+: EMC2303 controller for 3 case fans + GNSS (UART/PPS) breakout. KiCad 10, CERN-OHL-S v2.
41 partsCERN-OHL-S-2.0 - 2 layers40 × 40 mm

- 6 layers131 × 125 mm

Sunbeam em7000
Resident-X/brew-state
brew-state: bare-metal C state estimation and forward-horizon profiling for the Sunbeam EM7000. Built with Staircase.
444 partsMIT - 4 layers100 × 81 mm

Canary
stoatworks-labs/canary
Open-hardware IP-to-CAN converter compatible with the d&b R70 Ethernet-to-CAN protocol. ESP32-S3, W5500, isolated CAN, 3D-printed case. Not affiliated with d&b audiotechnik.
76 parts - 2 layers100 × 100 mm

CTRL
DD1SB/ARDF-TX
Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.
256 partsMIT - 4 layers87.5 × 50.6 mm

Side board
AndreiVladescu/Vector-UGV
An 18-DOF hexapod research platform: a smart controller per leg on CAN, a Raspberry Pi CM5 carrier, camera and SDR payload, ELRS / Wi-Fi / 4G links. Built for the PCBWay 9th Project Design Contest.
299 partsCERN-OHL-S-2.0
Questions
How big is the Power Board PCB?
It measures 42 × 42 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Power Board use?
74 parts, built around the ADS1115IDGSR, STLM75DS2F, BQ25186 and BSMD1206-110-30V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power Board KiCad files?
From the Harveyn4444/TocoSat-powerboard repository on GitHub, at the commit this page was made from: the board is hardware/kicad/Power-Board.kicad_pcb and its schematic hardware/kicad/Power-Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Harveyn4444 before reusing the design.