Skip to the content
2 layers330 × 94 mmGuys split keyboardV2, the printed circuit board in 3D

Guys split keyboardV2

GuySandler/Guy-s-split-keyboard

My first project I am making on my own. A basic wireless split keyboard

Size
330 × 94 mm
Copper layers
2
Thickness
1.6 mm
Parts
108
Nets
42
Pads
370
Tracks, vias
373, 19
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Nov 2025
Updated
28 Nov 2025

Overview

Guys split keyboardV2 is an open-source printed circuit board by GuySandler, from the GuySandler/Guy-s-split-keyboard repository on GitHub. It is a 2-layer board of 330 × 94 mm with 108 parts on 42 nets, routed with 373 tracks and 19 vias.

Its parts include 42 diodes, 42 switches, 4 resistors and 2 ICs. It belongs with the nRF52 and nRF5x boards of this library.

README

README.md

Guy's-split-keyboard

My first project I am making on my own. A basic wireless split keyboard

BOM:

AmountNameSourcePrice
2XIAO-nRF52840aliexpress not including $7.72 shipping17.98
42 (min 50)Gateron Low Profile Switch 2.0aliexpress16.79
2103450 3.7V 2000mAh Polymer Lithiumaliexpress9.65
42 (min 50)IN4148 DO-35 High-Speed Switching Diodesaliexpress (buying 100 is .48 more than buying 50)1.95
247 Ohms resistorsI have some left from #solder0
4M3x16 BoltI have some from a previous hackpad0
4M3 HeatsetI have some from a previous hackpad0
42keycapsI am resin printing mine and found these modelsX
1bottom 3d printed caseI am FDM printing mine, model found in CAD folderX

Picturess

LabelImage
Schematic<img src=imgs/schematic.png width="400">
PCB<img src=imgs/pcb.png width="300">
CAD<img src=imgs/buildpreview.png width="500">
JLC Cart<img src=imgs/jlccart.png width="500">
JLC + Shipping<img src=imgs/jlcfinal.png width="500">
Aliexpress Cart<img src=imgs/aliexpresscart.png width="500">

Total Price (without 3d printed parts)

$75.29

  • 28.09 JLC + 47.2 Aliexpress

Parts

108
QtyValueFootprintReferences
42DDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D1, D10, D10, D11, D11, D12, D12, D13, D13, D14, D14, D15, D15, D16, D16 +26
40SW_PushGateronKS33Solder:Gateron-KS33-Solderable-1USW1, SW1, SW10, SW10, SW11, SW11, SW12, SW12, SW13, SW13, SW14, SW14, SW15, SW15, SW16, SW16 +24
8MountingHoleTestPoint:TestPoint_Loop_D3.80mm_Drill2.8mmH2, H2, H4, H4, H6, H6, H8, H8
4MountingHolePanelization:mouse-bite-5mm-slotH1, H3, H5, H7
4RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R1, R2, R2
2BATTestPoint:TestPoint_Pad_D2.0mmTP1, TP1
2GNDTestPoint:TestPoint_Pad_D2.0mmTP2, TP2
2LOGOLOGOG***, G***
2SW_PushGateronKS33Solder:Gateron-KS33-Solderable-2USW8, SW8
2XIAO-nRF52840-SMDModdedxiao:modified-XIAO-nRF52840-SMDU1, U1

More from GuySandler/Guy-s-split-keyboard

1
  • 2 layers161 × 98 mmGuys split keyboard, the printed circuit board in 3D

    Guys split keyboard

    GuySandler/Guy-s-split-keyboard

    My first project I am making on my own. A basic wireless split keyboard

    55 parts

Similar boards

  • 2 layers89.2 × 82.6 mmDesktop 50 Pin TopConn, the printed circuit board in 3D

    Desktop 50 Pin TopConn

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    108 parts459GPL-3.0
  • 2 layers312 × 140 mmTsynth2 Rev1.3, the printed circuit board in 3D

    Tsynth2 Rev1.3

    Electrotechnique/TSynth-Teensy4.1

    TSynth for Teensy 4.1

    108 parts182
  • 2 layers99.1 × 90.7 mmBgkeeb, the printed circuit board in 3D

    Bgkeeb

    sadekbaroudi/bgkeeb

    This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

    108 parts108
  • 2 layers165 × 113 mmMask-0.0.0, the printed circuit board in 3D

    Mask-0.0.0

    marcoster/mask

    MArco's Split Keyboard

    108 parts44MPL-2.0
  • 2 layers262 × 113.9 mmQuacken, the printed circuit board in 3D

    Quacken

    Nuclear-Squid/Quacken

    Libre, ergonomic, polymorphic: a single PCB for many possible layouts.

    108 parts38GPL-3.0
  • 2 layers87 × 87 mmCn tester panel, the printed circuit board in 3D

    Cn tester panel

    aroum/cn_tester

    c!n tester is a hardware and software system designed for testing ProMicro-like microcontrollers.

    108 parts37MIT
  • 2 layers161.5 × 106 mmWaccaProtocolTranslator, the printed circuit board in 3D

    WaccaProtocolTranslator

    FizzyApple12/Waccon

    A repository for all of the files in my design for an open-source touch ring controller.

    108 parts33
  • 2 layers258.2 × 96.8 mmNarfkb, the printed circuit board in 3D

    Narfkb

    sebastian-stumpf/narfkb

    rp2040 powered split keyboard with rotary encoders and 6mm tactile buttons

    108 parts29MIT

Questions

How big is the Guys split keyboardV2 PCB?

It measures 330 × 94 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Guys split keyboardV2 use?

108 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Guys split keyboardV2 KiCad files?

From the GuySandler/Guy-s-split-keyboard repository on GitHub, at the commit this page was made from: the board is PCB V2/Guys-split-keyboard/Guys-split-keyboardV2.kicad_pcb and its schematic PCB V2/Guys-split-keyboard/Guys-split-keyboardV2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Guys split keyboardV2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask GuySandler before reusing the design.