2 layers78 × 84 mm
2 layers94.2 × 72.6 mm
ENCM 511 Devboard
Green-Zinger/ENCM511_PCB- Size
- 94.2 × 72.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 38
- Pads
- 117
- Tracks, vias
- 205, 37
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Sep 2026
- Updated
- 10 Oct 2026
Overview
ENCM 511 Devboard is an open-source printed circuit board by Green-Zinger, from the Green-Zinger/ENCM511_PCB repository on GitHub. It is a 2-layer board of 94.2 × 72.6 mm with 26 parts on 38 nets, routed with 205 tracks and 37 vias.
It is built around the PIC24FJ256GA702-I/SO and LM1117DT-3.3. Its parts include 6 connectors, 5 capacitors, 5 resistors, 4 diodes and 4 switches. It belongs with the microcontroller boards boards and the PIC boards of this library.
Main components
2
PIC24FJ256GA702-I/SO
SOIC-28-300mil-40℃~+85℃ 12bit 16 Bit 16KB 22 256KB 2V~3.6V 32MHz Built-in FLASH PIC SOIC-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM1117DT-3.3
TO-2520℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4, R5 |
| 4 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4 |
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C3 |
| 2 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5, J6 |
| 2 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2, J3 |
| 1 | 10 uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | Barrel_Jack_MountingPin | 00-footprint-library:BarrelJack_Horizontal_personal | J1 |
| 1 | Conn_01x16_Socket | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J4 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | PIC24FJ256GA702-I/SO | 00-footprint-library:SOIC28_SO_MCH | U2 |
Similar boards
- 2 layers55 × 55 mm
ControlBoard
Deni90/singleDigitNixieClock
A small project that combines ESP32 with a vintage Soviet Nixie tube from the 70’ to create an artistic clock. Originally developed on ESP8266/Arduino, now evolved to ESP32 with ESP-IDF for greater performance and…
39 parts5MIT - 2 layers139.7 × 114.3 mm
Self balancing robot
K0nradG/self-balancing-robot
Self-balancing robot powered by nRF52840 and Zephyr RTOS, with BLE control, OTA updates, and a Raspberry Pi camera interface designed for future autonomous navigation.
36 parts4Apache-2.0 - 2 layers99.8 × 60.2 mm
Irrigation IoT
VictorRavani/Irrigation_IoT
This project covers the complete development of Hardware and Firmware for IoT-based supervisory control. It offers all the necessary information and resources so that anyone can set up the system independently.
79 parts4MIT - 4 layers70 × 70 mm
Inverter KiCAD
AresEnsea/2425_Projet2A_AresCFR
Ce repository GitHub regroupe l'ensemble des projets & documents réalisés par l'association Ares pour la Coupe de France de Robotique 2025
104 parts3 - 2 layers87.6 × 63.2 mm
- 4 layers100 × 40 mm
- 4 layers60 × 60 mm
Questions
How big is the ENCM 511 Devboard PCB?
It measures 94.2 × 72.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ENCM 511 Devboard use?
26 parts, built around the PIC24FJ256GA702-I/SO and LM1117DT-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ENCM 511 Devboard KiCad files?
From the Green-Zinger/ENCM511_PCB repository on GitHub, at the commit this page was made from: the board is ENCM_511_Devboard/ENCM_511_Devboard.kicad_pcb and its schematic ENCM_511_Devboard/ENCM_511_Devboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ENCM 511 Devboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Green-Zinger before reusing the design.