Skip to the content
2 layersCircuit design, the printed circuit board in 3D

This project consists of collecting meteorological data from several classrooms using sensors and microcontrollers. This data will be graphicated and analyzed from the perspective of thermal comfort.

Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
9
Pads
23
Tracks, vias
45, 0
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
29 Oct 2025
Updated
12 Dec 2025

Overview

Circuit design is an open-source printed circuit board by GonzaStd, from the GonzaStd/classrooms-temperatures repository on GitHub. It is a 2-layer board with 9 parts on 9 nets, routed with 45 tracks and 0 vias.

It is built around the ESP-01 and AMS1117-3.3. Its parts include 2 ICs, 1 capacitor and 1 resistor. It belongs with the ESP8266 boards of this library.

Main components

2

README

README.md

[!IMPORTANT]
This project has been made for a specific purpose. If you want to replicate this, you would have to ADAPT IT. However, example code and circuit documentation are provided below on the index, and they are for general use.

Circuit diagram

Here is the url of the circuit.

Index

Context

With the purpose of measuring the temperature of classrooms in our school (and so the thermal discomfort), I've made this project that connects esp-01 modules that act like mqtt clients that publishes temperature and humidity, and by the other side subscribes to a topic they use to know WHEN to send data.

On the other hand, we'll need a broker, in this case I'll use a Raspberry Pi. This one has to send a request to their clients, receive temperature and humidity, then upload the data to a Google Spreadsheet.

After a few months, this data will be used to analyse the thermal discomfort and then a request will be sent asking the authorities to allow the placement of rotating fans and curtains (currently there are few fans, they do not rotate and there are no curtains).

Parts

9
QtyValueFootprintReferences
4, , ,
1100uF 10vCapacitor_THT:CP_Radial_D7.5mm_P2.50mmC1
14.7kOhmResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1DHTSensor:three_pin_DHT11_5.5x12.0_P2.54mmDHT
1ESP-01ESP8266:ESP-01U1

Similar boards

  • 2 layers30 × 17 mmMK312WIFI, the printed circuit board in 3D

    MK312WIFI

    Rangarig/MK312WIFI

    A replacement for the MK312's bluetooth adapter that allows to connect to it via wifi ... or comport

    7 parts7GPL-3.0
  • 2 layersESP32+DH11, the printed circuit board in 3D

    ESP32+DH11

    duronxp/ESP32_DTH22_termo

    Mini project for a remote-controlled heater with temp and humidity sensors

    27 parts
  • 2 layers55.9 × 98.9 mmPanel1, the printed circuit board in 3D

    Panel1

    RoboticsBrno/semafor

    :vertical_traffic_light: Traffic light gadget for outdoor games designed for Helceletka.cz.

    252 partsMIT
  • 2 layers159.9 × 119.9 mmMotherboard, the printed circuit board in 3D

    Motherboard

    staskaaa-netizen/uCNC_Pi_Board

    uCNC RP2350B Motherboard

    275 parts
  • 2 layers101.9 × 57.4 mmEsp gateway, the printed circuit board in 3D

    Esp gateway

    Strat00s/esp-gateway

    All-in-One ESP32 gateway.

    45 partsGPL-3.0
  • 2 layers38.5 × 33 mmWled esp01-controller, the printed circuit board in 3D

    Wled esp01-controller

    amitesh-singh/kicad-pcbs

    A place to play with Kicad

    9 parts1GPL-3.0
  • 2 layers100 × 100 mmMist1010, the printed circuit board in 3D

    Mist1010

    UzixLS/mist1010-board

    10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

    273 parts43MIT
  • 2 layers50 × 100 mmDMX CTRL, the printed circuit board in 3D

    DMX CTRL

    michar71/DMX_CTRL

    DMX512 Controller for light installations based on Bluepill STM32F103 Board

    46 parts12

Questions

What parts does the Circuit design use?

9 parts, built around the ESP-01 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Circuit design KiCad files?

From the GonzaStd/classrooms-temperatures repository on GitHub, at the commit this page was made from: the board is pcb/circuit-design.kicad_pcb and its schematic pcb/circuit-design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Circuit design design in my own project?

Its repository states no licence, so its author keeps all rights: ask GonzaStd before reusing the design.