

Daughter Board Muses Op Amp
- Size
- 140.3 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 40
- Pads
- 135
- Tracks, vias
- 245, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 May 2023
- Updated
- 31 Oct 2026
Overview
Daughter Board Muses Op Amp is an open-source printed circuit board by Gninnorg, from the Gninnorg/ThePreamp repository on GitHub. It is a 2-layer board of 140.3 × 65 mm with 42 parts on 40 nets, routed with 245 tracks and 8 vias.
It is built around the NE5534D and 2SK170-GR. Its parts include 14 capacitors, 13 resistors, 4 transistors, 4 connectors and 3 ICs. It belongs with the audio and music boards of this library.
Main components
2NE5534D
SOIC-8-20V~-3V、3V~20V 0℃~+70℃ 1 1.5uA 100dB 10MHz 13V/us 3.5nV/√Hz@1kHz 300nA 38mA 4mA 4mV Built-in compensation SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier2SK170-GR
TO-92TO-92 Silicon Carbide Field Effect Transistor (MOSFET) ROHSQNHSilicon Carbide Field Effect Transistor (MOSFET)
README
Readme.mdTEst
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100 uf/25V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C5, C6, C7, C8, C9, C10, C12, C14 |
| 4 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7, R10, R11 |
| 4 | 2SK170 | Package_TO_SOT_THT:TO-92_HandSolder | Q1, Q2, Q3, Q4 |
| 2 | 10 pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 10 uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13 |
| 2 | 220K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | 47 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | NE5534 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | 0,1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 10 uf/50V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C11 |
| 1 | Audio In | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Audio Out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Buffer Power | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | Digital In | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Muses_72323 | Muses:TSSOP-32_6.1x11mm_P0.65mm | U3 |
The 38 most common of 42 parts.
More from Gninnorg/ThePreamp
8- 2 layers285 × 65 mm

- 2 layers128 × 85 mm

- 2 layers336 × 44.5 mm

- 2 layers

- 2 layers

- 2 layers54.4 × 85 mm

- 2 layers140.3 × 65 mm

- 2 layers82.2 × 85 mm

Similar boards
- 2 layers100 × 63 mm

- 2 layers85.1 × 62.2 mm

Mic extension board
StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
75 parts146 - 4 layers121.6 × 79.8 mm

- 2 layers52.6 × 25.9 mm

PreampV3
ouspg/SOP-Robot
Robot project for the Embedded Software Project [521275A] and Software Project [521479S]
18 parts5 - 2 layers74.2 × 87.1 mm

Nc1
nietamten/VoltageConverterForSolar
NCP1034 buck with regulated output voltage, output current, minimum input voltage
76 parts4 - 2 layers70 × 54.5 mm

- 2 layers51 × 31 mm

AudioAmplifierPCB
ODARI-CHARLES1/AudioAmplifierPCB-NE5532
Audio Amplifier using NE5532 OP. AMP in KICAD
16 parts2 - 2 layers100 × 100 mm

Questions
How big is the Daughter Board Muses Op Amp PCB?
It measures 140.3 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Daughter Board Muses Op Amp use?
42 parts, built around the NE5534D and 2SK170-GR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Daughter Board Muses Op Amp KiCad files?
From the Gninnorg/ThePreamp repository on GitHub, at the commit this page was made from: the board is Hardware/Analogue/Daughter-Board-Muses-Op-Amp/Daughter-Board-Muses-Op-Amp.kicad_pcb and its schematic Hardware/Analogue/Buffer-Opamp/Buffer-Opamp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Daughter Board Muses Op Amp design in my own project?
Its repository states no licence, so its author keeps all rights: ask Gninnorg before reusing the design.