
Flight ComputerV1
TheRealPilot/VUSAT_BOARDS
VUSAT's Flight Computer MK.1 schematics and PCB design.

A bluetooth generic development board with BLUENRG-1.
Generic Bluetooth Board is an open-source printed circuit board by GeneRAD, from the GeneRAD/BLUENRG1_Generic_Bluetooth_Board repository on GitHub. It is a 2-layer board of 34.5 × 36.8 mm with 67 parts on 45 nets, routed with 605 tracks and 110 vias.
It is built around the BLUENRG-132 and LMT84DCK. Its parts include 27 capacitors, 18 resistors, 6 connectors, 6 inductors and 4 ICs. It belongs with the radio and wireless boards of this library.
A bluetooth generic development board with BLUENRG-1.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitors_SMD:C_0402 | C4, C8, C17, C19, C23, C26, C27 |
| 4 | 10k | Resistors_SMD:R_0402 | R7, R16, R17, R18 |
| 4 | 15pF | Capacitors_SMD:C_0402 | C5, C6, C21, C22 |
| 4 | 1k | Resistors_SMD:R_0402 | R2, R3, R4, R11 |
| 4 | 1uF | Capacitors_SMD:C_0402 | C3, C7, C16, C18 |
| 4 | R | Resistors_SMD:R_0402 | R8, R9, R14, R15 |
| 3 | 0.5pF | Capacitors_SMD:C_0402 | C11, C13, C15 |
| 3 | 0R | Resistors_SMD:R_0402 | R5, R6, R10 |
| 3 | Conn_01x03_Male | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.00mm_SMD_Pin1Left | J3, J5, J6 |
| 2 | 1.3nH | Resistors_SMD:R_0402_NoSilk | L2, L3 |
| 2 | 1.3pF | Capacitors_SMD:C_0402 | C10, C20 |
| 2 | 309k | Resistors_SMD:R_0402 | R1, R13 |
| 2 | 56pF | Capacitors_SMD:C_0402 | C9, C12 |
| 1 | 100pF | Capacitors_SMD:C_0402 | C1 |
| 1 | 10uF | Capacitors_SMD:C_0402 | C25 |
| 1 | 10uH | Resistors_SMD:R_0805 | L1 |
| 1 | 150nF | Capacitors_SMD:C_0402 | C2 |
| 1 | 2.4nH | Resistors_SMD:R_0402_NoSilk | L5 |
| 1 | 4.7uF | Capacitors_SMD:C_0402 | C24 |
| 1 | 4.7uH | Inductors:Inductor_1212 | L6 |
| 1 | 5.6nH | Resistors_SMD:R_0402_NoSilk | L4 |
| 1 | 9.76k | Resistors_SMD:R_0402 | R12 |
| 1 | AT25xxx | Housings_SSOP:TSSOP-8_4.4x3mm_Pitch0.65mm | U4 |
| 1 | Antenna_Shield | MyLIB:2.4GHz-INVERTED-F-ANTENNA | AE1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | BlueNRG-1 | MyLIB:QFN-32-1EP_5x5mm_Pitch0.5mm | U1 |
| 1 | C | Capacitors_SMD:C_0402 | C14 |
| 1 | Conn_01x02_Female | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.00mm_SMD_Pin1Right | J1 |
| 1 | Conn_01x04_Male | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.00mm_SMD_Pin1Left | J4 |
| 1 | Conn_01x05_Male | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.00mm_SMD_Pin1Right | J2 |
| 1 | Crystal_GND24_Small | Crystals:Crystal_SMD_3225-4pin_3.2x2.5mm_HandSoldering | Y2 |
| 1 | Crystal_Small | Crystals:Crystal_SMD_3215-2pin_3.2x1.5mm | Y1 |
| 1 | LED | LEDs:LED_0603 | D1 |
| 1 | LMT84DCK | TO_SOT_Packages_SMD:SOT-353_SC-70-5 | U2 |
| 1 | MCP1640BCH | TO_SOT_Packages_SMD:SOT-23-6_Handsoldering | U3 |
| 1 | SW_DIP_x08 | Buttons_Switches_SMD:SW_DIP_x8_W5.08mm_Slide_Copal_CHS-A | SW1 |

TheRealPilot/VUSAT_BOARDS
VUSAT's Flight Computer MK.1 schematics and PCB design.




Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


It measures 34.5 × 36.8 mm and has 2 copper layers, 1.6 mm thick.
67 parts, built around the BLUENRG-132 and LMT84DCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GeneRAD/BLUENRG1_Generic_Bluetooth_Board repository on GitHub, at the commit this page was made from: the board is 1_SCH&PCB/Generic_Bluetooth_Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GeneRAD before reusing the design.