2 layers
Flight Computer V2.1
TheRealPilot/VUSAT_BOARDS
VUSAT's Flight Computer MK.1 schematics and PCB design.
6 parts
4 layers100 × 100 mm
Flight ComputerV1
TheRealPilot/VUSAT_BOARDSVUSAT's Flight Computer MK.1 schematics and PCB design.
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 39
- Nets
- 76
- Pads
- 197
- Tracks, vias
- 368, 64
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Aug 2022
- Updated
- 1 Mar 2023
Overview
Flight ComputerV1 is an open-source printed circuit board by TheRealPilot, from the TheRealPilot/VUSAT_BOARDS repository on GitHub. It is a 4-layer board of 100 × 100 mm with 39 parts on 76 nets, routed with 368 tracks and 64 vias.
It is built around the ATMEGA328PB-AU and LMT84DCK. Its parts include 11 capacitors, 7 connectors, 6 resistors, 5 ICs and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328PB-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 27 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LMT84DCK
SC-70-5-50℃~+150℃ -50℃~+150℃ 1.5V~5.5V 700us ±2.7℃ SC-70-5 Temperature Sensors ROHSTexas InstrumentsTemperature Sensors
README
README.mdVUSAT-BOARDS
VUSAT's Flight Computer MK.1 schematics and PCB design.
For Contributors: Make sure your personal branch is created/pulled from main. This ensures you're working with the most up-to-date files. Not doing this results in merge conflicts!
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C101, C302, C303, C304, C305 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H101, H102, H103, H104 |
| 3 | 40 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R101, R102, R103 |
| 2 | 2.2K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R105, R106 |
| 2 | 25pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C102, C103 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C201 |
| 1 | 1-1825910-8 | PushSwitch:1-1825910-8 | SW101 |
| 1 | 100nF | 0.1uF P_Cap:UWP1H0R1MCL1GB | C104 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R104 |
| 1 | 1uF | 0.1uF P_Cap:UWP1H0R1MCL1GB | C301 |
| 1 | 830010043 | 8 Mhz crystal:830010043 | XTAL101 |
| 1 | ATmega328PB-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U101 |
| 1 | C | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | C105 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J104 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J103 |
| 1 | Conn_02x10_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J106 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J201 |
| 1 | GREEN | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D102 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J101 |
| 1 | LIS3MDLTR | 3-axis magnetometer:LIS3MDLTR | U301 |
| 1 | LMT84DCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U102 |
| 1 | LOGO | Graphics:VUSAT.pretty | G*** |
| 1 | LSM6DSOXTR | 6-axis IMU:LSM6DSOXTR | U302 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_104031-0811 | J105 |
| 1 | RED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D101 |
| 1 | RXM-GPS-RM-T | Linx GPS:RXM-GPS-RM-T | U201 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Altech:Altech_AK300_1x02_P5.00mm_45-Degree | J102 |
| 1 | YELLOW | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D103 |
More from TheRealPilot/VUSAT_BOARDS
1Similar boards
- 2 layers34.5 × 36.8 mm
Generic Bluetooth Board
GeneRAD/BLUENRG1_Generic_Bluetooth_Board
A bluetooth generic development board with BLUENRG-1.
67 parts1 - 4 layers115.5 × 66 mm
- 2 layers78 × 130 mm
Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT - 2 layers102 × 81.5 mm
C64pico
silvervest/c64pico
This is a tiny emulated C64 running on a Raspberry Pi Pico! Full details of the build can be found at https://www.youtube.com/watch?v=hgLhGpbC6E4
97 parts86 - 2 layers58.4 × 34.3 mm
SIO2SD
c0pperdragon/SIO2SD
An Arduino-based floppy drive emulator for the atari 8 bit computers.
26 parts83 - 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers88.9 × 50.8 mm
BLDC BIZ CARD
ageppert/Brushless-Motor-Biz-Card
A brushless motor and driver built in to a business card form-factor for learning and experimenting!
82 parts38MIT - 2 layers52.1 × 37.4 mm
Consolizer
orangeglo/PS2PSP
Board to connect a PS2 controller to a PSP 2000 (PSP Consolizer)
25 parts38GPL-3.0
Questions
How big is the Flight ComputerV1 PCB?
It measures 100 × 100 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Flight ComputerV1 use?
39 parts, built around the ATMEGA328PB-AU and LMT84DCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flight ComputerV1 KiCad files?
From the TheRealPilot/VUSAT_BOARDS repository on GitHub, at the commit this page was made from: the board is Flight ComputerV1.kicad_pcb and its schematic Flight Computer V2.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flight ComputerV1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask TheRealPilot before reusing the design.