
Generic Bluetooth Board
GeneRAD/BLUENRG1_Generic_Bluetooth_Board
A bluetooth generic development board with BLUENRG-1.
STMicroelectronicsExtended
-40℃~+105℃ 1.7V~3.6V 1Mbps 2.4GHz 2.4GHz~2.4835GHz 8.3mA 8dBm Bluetooth SPI、UART、ADC、I2C Supports software reset、Power-on Reset、Power-off reset function、Supports RSSI function QFN-32-EP(5x5) RF Transceiver ICs ROHS
The BLUENRG-132 is a RF Transceiver IC made by STMicroelectronics in a QFN-32-EP(5x5) package with 33 pins. -40℃~+105℃ 1.7V~3.6V 1Mbps 2.4GHz 2.4GHz~2.4835GHz 8.3mA 8dBm Bluetooth SPI、UART、ADC、I2C Supports software reset、Power-on Reset、Power-off reset function、Supports RSSI function QFN-32-EP(5x5) RF Transceiver ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:BLUENRG-232, from EasyEDA) and its footprint (EasyEDA_Cloud:QFN-32_L5.0-W5.0-P0.50-TL-EP3.4, from EasyEDA), ready for a KiCad board. 3 are in stock at JLCPCB (part C133308). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | DIO10 | Unspecified |
| 2 | DIO9 | Unspecified |
| 3 | DIO8 | Unspecified |
| 4 | DIO7 | Unspecified |
| 5 | DIO6 | Unspecified |
| 6 | VBAT3 | Unspecified |
| 7 | DIO5 | Unspecified |
| 8 | DIO4 | Unspecified |
| 9 | DIO3 | Unspecified |
| 10 | DIO2 | Unspecified |
| 11 | DIO1 | Unspecified |
| 12 | DIO0 | Unspecified |
| 13 | ANATEST0/DIO14 | Unspecified |
| 14 | ANATEST1 | Unspecified |
| 15 | ADC1 | Unspecified |
| 16 | ADC2 | Unspecified |
| 17 | FXTAL1 | Unspecified |
| 18 | FXTAL0 | Unspecified |
| 19 | VBAT2 | Unspecified |
| 20 | RF1 | Unspecified |
| 21 | RF0 | Unspecified |
| 22 | SXTAL1 | Unspecified |
| 23 | SXTAL0 | Unspecified |
| 24 | VBAT1 | Unspecified |
| 25 | RSSETN | Unspecified |
| 26 | SMPSFILT1 | Unspecified |
| 27 | SMPSFILT2 | Unspecified |
| 28 | VDD1V2 | Unspecified |
| 29 | DIO13 | Unspecified |
| 30 | DIO12 | Unspecified |
| 31 | TEST | Unspecified |
| 32 | DIO11 | Unspecified |
| 33 | GND | Unspecified |

GeneRAD/BLUENRG1_Generic_Bluetooth_Board
A bluetooth generic development board with BLUENRG-1.
Yes. The symbol is EasyEDA_Cloud:BLUENRG-232 and the footprint EasyEDA_Cloud:QFN-32_L5.0-W5.0-P0.50-TL-EP3.4, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN-32-EP(5x5), with 33 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C133308, with 3 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the AT86RF231-ZF by Microchip Technology, the NRF24LU1P-F32Q32-R7 by Nordic Semicon and the NRF24LU1P-F16Q32-R7 by Nordic Semicon. Check their datasheets: a part that fits the footprint may still differ in its ratings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.