

Moca hcho
Bluetooth 5 BLE formaldehyde/temperature/humidity sensor beacon
- Size
- 66 × 57 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 46
- Pads
- 101
- Tracks, vias
- 92, 18
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Dec 2021
- Updated
- 1 Jan 2022
Overview
Moca hcho is an open-source printed circuit board by Gekkio, from the Gekkio/moca-hcho repository on GitHub. It is a 2-layer board of 66 × 57 mm with 24 parts on 46 nets, routed with 92 tracks and 18 vias.
It is built around the 74LVC1G07, BT832F and LN1132P332MR-G, with the SMF10CA and BSS84 among its other parts. Its parts include 5 capacitors, 3 resistors, 3 ICs, 3 diodes and 3 connectors. It belongs with the radio and wireless and sensors and measurement boards of this library.
Main components
574LVC1G07
SOT-353-40℃~+105℃ 1 1 1.65V~5.5V 1.6ns@5.5V,50pF 24mA 4uA 74LVC Open-drain Power-off isolation、Level shifting Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core ElecBuffers, Drivers, Receivers, TransceiversBT832F
SMD-16POTA空中升级、加密功能 SMD-16P Bluetooth Modules ROHSFanstelBluetooth ModulesLN1132P332MR-G
SOT-23-40℃~+85℃ 1 240mV@(100mA) 3.3V 300mA 50dB@(1kHz) 5uA 7V Fixed Over Current Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSNATLINEARVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSMF10CA
SOD-123FL-55℃~+150℃ 10V 11.8A@10/1000us 12.3V 17V 2.5uA 200W@10/1000us Bidirectional IEC 61000-4-2 TVS SOD-123FL ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | DNP | MountingHole:MountingHole_2.5mm | H1, H2, H3, H4 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C4, C5 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | DNP | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H5, H6 |
| 2 | SMF10CA | Diode_SMD:D_SOD-123F | D1, D2 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_5x5.8 | C1 |
| 1 | 74LVC1G07 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U3 |
| 1 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BT832F | Gekkio_RF_Module:Fanstel_BT832F | U1 |
| 1 | DNP | Connector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm_Relief | J1 |
| 1 | DNP | Connector_Wire:SolderWire-0.15sqmm_1x05_P4mm_D0.5mm_OD1.5mm | J2 |
| 1 | DNP | Connector:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical | J3 |
| 1 | LED | LED_THT:LED_D3.0mm | D3 |
| 1 | LN1132P332M | Package_TO_SOT_SMD:SOT-23 | U2 |
Similar boards
- 4 layers51.4 × 61 mm

- 6 layers121 × 83 mm

- 4 layers85 × 85 mm

- 4 layers120 × 120 mm

Yellow
NabuCasa/yellow
Home Assistant Yellow - hardware for Home Assistant which grows with your needs.
322 parts116 - 4 layers38 × 38 mm

- 4 layers72.6 × 170 mm

OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 4 layers66 × 90 mm

- 2 layers142.1 × 106 mm

Questions
How big is the Moca hcho PCB?
It measures 66 × 57 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Moca hcho use?
24 parts, built around the 74LVC1G07, BT832F, LN1132P332MR-G and SMF10CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Moca hcho KiCad files?
From the Gekkio/moca-hcho repository on GitHub, at the commit this page was made from: the board is hw/moca-hcho.kicad_pcb and its schematic hw/moca-hcho.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Moca hcho design in my own project?
Its repository states no licence, so its author keeps all rights: ask Gekkio before reusing the design.