

Group 8's Practicum Repository
- Size
- 47 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 11
- Pads
- 39
- Tracks, vias
- 66, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Oct 2017
- Updated
- 7 Dec 2017
Overview
TinyFan is an open-source printed circuit board by GaryLazerFinz, from the GaryLazerFinz/ECE-411-Capstone-Practicum repository on GitHub. It is a 2-layer board of 47 × 20.3 mm with 13 parts on 11 nets, routed with 66 tracks and 0 vias.
It is built around the ATTINY85-15M and MCP9700A-E/TO. Its parts include 3 capacitors, 2 resistors, 2 ICs, 2 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY85-15M
WQFN-20-EP(4x4)-40℃~+85℃ 16MHz 2.7V~5.5V 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH WQFN-20-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)MCP9700A-E/TO
TO-92-40℃~+125℃ 2.3V~5.5V ±2℃ TO-92 Temperature Sensors ROHSMicrochip TechnologyTemperature Sensors
README
README.mdECE-411-Capstone-Practicum
Group 8's Practicum Repository
We have designed a inexpensive and simple fan using a micocontroller and a custom built pcb.
Parts Required
1 10k resistor smd
1 1k resistor smd
3 100n Capacitors smd or th
1 5 volt Voltage Converter th
1 ATtiny85 MCU th
1 2n4001 Diode th
9 volt Battery Connector
1 5 V DC Motor
Analog Temperature Sensor
Arduino UNO for ISP programming
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10u | Capacitors_THT:CP_Radial_Tantal_D6.0mm_P2.50mm | C2, C3 |
| 1 | 1 k | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 100n | Capacitors_THT:CP_Radial_Tantal_D6.0mm_P2.50mm | C1 |
| 1 | 5V Reg L7805CV | TO_SOT_Packages_THT:TO-92_Molded_Narrow | U2 |
| 1 | >10k | Resistors_SMD:R_0603_HandSoldering | R4 |
| 1 | ATTINY85 | Housings_DIP:DIP-8_W7.62mm | U1 |
| 1 | Conn_01x02 | Connectors_JST:JST_EH_B02B-EH-A_02x2.50mm_Straight | J2 |
| 1 | Conn_01x06 | Connectors_JAE:JAE_LY20-06P-2T_2x03x2.00mm_Straight | J1 |
| 1 | D | Diodes_THT:D_A-405_P7.62mm_Horizontal | D1 |
| 1 | Fan | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | M1 |
| 1 | MCP9700A-E/TO | TO_SOT_Packages_THT:TO-92_Molded_Narrow | TH1 |
| 1 | NPN | TO_SOT_Packages_SMD:SOT-23 | Q1 |
Similar boards
- 4 layers250.8 × 30 mm

- 2 layers50 × 50 mm

T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs
41 parts133 - 2 layers23 × 45 mm

- 2 layers41.1 × 110.7 mm

- 2 layers

- 2 layers40 × 30 mm

Test board
Guiimartinho/routeai
LLM-Powered Electronic Design Automation Platform for PCB Design
4 parts13 - 2 layers78.3 × 78.5 mm

50x70 tiny
rallekralle11/Tinyreflow
Inspired by afterearthltd's reflow plate, but using fewer and simpler components.
23 parts10 - 2 layers

MIDIMonkey
aleh/MIDIMonkey
Listens to MIDI messages on one pin and triggers drums on the others
8 parts9MIT
Questions
How big is the TinyFan PCB?
It measures 47 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TinyFan use?
13 parts, built around the ATTINY85-15M and MCP9700A-E/TO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TinyFan KiCad files?
From the GaryLazerFinz/ECE-411-Capstone-Practicum repository on GitHub, at the commit this page was made from: the board is TinyFan.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TinyFan design in my own project?
Its repository states no licence, so its author keeps all rights: ask GaryLazerFinz before reusing the design.