
Nixie
pimborman/nixie-clock
This repository contains the design files of my own nixie clock. The last version is hosted on my Github Page.

HV5222 32 bit shift register breakout board
GR HV5222 Breakout is an open-source printed circuit board by GadgetReboot, from the GadgetReboot/HV5222_Breakout repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 54.8 × 34 mm with 27 parts on 53 nets, routed with 298 tracks and 61 vias.
It is built around the HV5222PG-G and SS16. Its parts include 12 resistors, 4 connectors, 3 capacitors, 3 transistors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
HV5222 32 bit shift register breakout board
Shield:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 91K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R3, R5, R6, R8, R9, R11 |
| 4 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R7, R10, R12 |
| 3 | 3904 | digikey-footprints:SOT-23-3 | Q1, Q2, Q3 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J4 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 10K5 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 22uH | Inductor_SMD:L_Taiyo-Yuden_NR-60xx_HandSoldering | L1 |
| 1 | AP3012 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J3 |
| 1 | HV5222 | Package_LCC:PLCC-44_16.6x16.6mm_P1.27mm | U2 |
| 1 | LOGO | _Custom_Footprints:pcb way logo | G*** |
| 1 | SS16 | Diode_SMD:D_SMA_Handsoldering | D1 |

pimborman/nixie-clock
This repository contains the design files of my own nixie clock. The last version is hosted on my Github Page.

rallepalaveev/A2DVI
This is based on Clintech Pico Board (CPB) with 48 GPIOs, most 5V tolerant.

BerkeleyLab/Marble
Dual FMC FPGA carrier board developed for general purpose use in particle accelerator electronics instrumentation.

andrekuehne/openradfan
An ESPHome-driven controller for radiator fans to improve heat output

BerkeleyLab/Marble-Mini
"Marble-Mini" Simple FMC carrier board with SFP, 2x FMC, PoE

PR77/CH554_USBQuadMouseKeyboard
CH554 based USB to Quadrature Mouse and Keyboard Interface

badaboombox/SS-Handheld-Console
An open-source handheld game console built around a Lattice ECP5 FPGA that uses a custom hybrid 2D + 3D graphics engine capable of DS-era 2D-and-3D gameplay at a locked 60 fps.
It measures 54.8 × 34 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the HV5222PG-G and SS16. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GadgetReboot/HV5222_Breakout repository on GitHub, at the commit this page was made from: the board is KiCad/GR_HV5222_Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).