Skip to the content
6 layers60 × 40 mmArchetype, the printed circuit board in 3D

A powerful SoM for DSP and audio processing

Size
60 × 40 mm
Copper layers
6
Thickness
1.6 mm
Parts
144
Nets
188
Pads
657
Tracks, vias
2,887, 236
Pours
4
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Jul 2024
Updated
12 Aug 2024

Overview

Archetype is an open-source printed circuit board by Fredrik-Reinholdsen, from the Fredrik-Reinholdsen/archetype repository on GitHub. It is a 6-layer board of 60 × 40 mm with 144 parts on 188 nets, routed with 2,887 tracks and 236 vias.

It is built around the W25Q128JVSIQ, COS8551TRA and ME6211C33M5G-N. Its parts include 68 capacitors, 38 resistors, 15 diodes, 9 ICs and 4 connectors. It belongs with the audio and music and computers and single-board computers boards and the STM32 boards of this library.

Main components

3

README

README.md

Archetype

A compact System on Module (SOM) for audio processing and DSP. It features 6-layer, 5x3 cm PCB, a powerful 550 MHz STM32H7 micro-controller with additional peripherals such as a high fidelity audio CODEC, SDRAM and flash memory.

The board has two mezzanine connectors on the back, one for analog signals and one for digital. Many of the STM32 peripherals are wired to and accesible via the mezzanine connectors, including SPI, I2C, UART, CAN, ADC inputs.

Archetype PCB

Parts

144
QtyValueFootprintReferences
31100nCapacitor_SMD:C_0402_1005MetricC101, C102, C103, C104, C105, C106, C107, C111, C113, C114, C115, C116, C117, C118, C123, C127 +15
111kResistor_SMD:R_0402_1005MetricR101, R102, R107, R108, R203, R206, R208, R210, R213, R216, R221
10D12V0M1U2S9-7Diode_SMD:D_SOD-923D105, D106, D107, D108, D109, D201, D202, D204, D205, D301
82.2uCapacitor_SMD:C_0402_1005MetricC120, C126, C129, C132, C133, C140, C301, C302
722RResistor_SMD:R_0402_1005MetricR104, R111, R113, R114, R115, R116, R117
61MResistor_SMD:R_0402_1005MetricR201, R204, R207, R211, R215, R220
61uCapacitor_SMD:C_0402_1005MetricC109, C110, C112, C121, C122, C124
510kResistor_SMD:R_0402_1005MetricR112, R118, R119, R218, R223
4100Resistor_SMD:R_0402_1005MetricR202, R209, R217, R222
410nCapacitor_SMD:C_0402_1005MetricC208, C214, C220, C224
410uCapacitor_SMD:C_0402_1005MetricC209, C216, C221, C225
42.2kResistor_SMD:R_0402_1005MetricR105, R106, R109, R110
4220pCapacitor_SMD:C_0402_1005MetricC210, C211, C217, C218
44.7uCapacitor_SMD:C_0402_1005MetricC108, C202, C206, C215
4COS8551TRAPackage_TO_SOT_SMD:SOT-23-5U201, U202, U203, U204
4LED_GREENLED_SMD:LED_0805_2012MetricD101, D102, D104, D203
4MountingHoleMountingHole:MountingHole_2.2mm_M2_DIN965H101, H102, H103, H104
2100RResistor_SMD:R_0805_2012MetricFB101, FB301
210pCapacitor_SMD:C_0603_1608MetricC119, C125
215pCapacitor_SMD:C_0603_1608MetricC130, C131
21nCapacitor_SMD:C_0402_1005MetricC222, C226
2Conn_02x27_Odd_EvenCustom:DF40C-50DP-0.4VJ301, J302
2ME6211C33M5G-NPackage_TO_SOT_SMD:SOT-23-5U101, U102
124MhzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmX101
132.768kHzCustom:SMD_3215-2PinX102
147RResistor_SMD:R_0402_1005MetricR103
147uCapacitor_SMD:C_0402_1005MetricC213
1BOOT0Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ102
1Conn_ARM_SWD_TagConnect_TC2030Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_VerticalJ101
1IS42S16160J-xTLIPackage_SO:TSOP-II-54_22.2x10.16mm_P0.8mmU103
1LED_REDLED_SMD:LED_0805_2012MetricD103
1STM32H723ZGTxPackage_QFP:LQFP-144_20x20mm_P0.5mmU104
1SW_SPSTCustom:SPST_TS-1187A-B-A-BSW101
1W25Q128JVSPackage_SO:SOIC-8_5.23x5.23mm_P1.27mmU105
1~Package_DFN_QFN:VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mmNAU88C22YG201

Similar boards

  • 6 layers90 × 90 mmCodex micro wired revA route nognd, the printed circuit board in 3D

    Codex micro wired revA route nognd

    slopus/codex-keybored

    A 100% vibe-coded hardware build: Fusion 360, six-layer KiCad PCB, STM32 firmware, and live JLC factory handoff.

    97 parts10
  • 4 layers51 × 21 mmNyx2b, the printed circuit board in 3D

    Nyx2b

    rh1tech/nyx

    Enhanced open source Raspberry Pi Pico / Raspberry Pi Pico 2 clone

    54 parts2MIT
  • 4 layers51.1 × 94 mmDas4-controller, the printed circuit board in 3D

    Das4-controller

    brandonrc/das4-controller

    Open-source RP2350B replacement controller board for the Das Keyboard 4 Professional (KiCad 10)

    83 parts1MIT
  • 2 layers85 × 55 mmOrgan synth business card, the printed circuit board in 3D

    Organ synth business card

    Giuseppe499/business_card_hardware

    This repository contains the KiCad files for my organ synth business card. The design is based on the RP2354 microcontroller, the PCM5102A DAC, and a custom resistive touch keyboard.

    109 partsCERN-OHL-S-2.0
  • 2 layers30.8 × 42.7 mmRp2040 chute release, the printed circuit board in 3D

    Rp2040 chute release

    Runcey/rp2040-cr

    Payload PCB designed for UAVs@Berkeley

    60 parts
  • 4 layers32 × 74 mmMicrofrank, the printed circuit board in 3D

    Microfrank

    rh1tech/frank

    RP2350 Based Hardware Emulation Platform

    103 parts66GPL-3.0
  • 2 layers87.8 × 59.8 mmFreeDeck SMD 2020-02, the printed circuit board in 3D

    FreeDeck SMD 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    37 parts772
  • 2 layers83.2 × 40 mmSmartdisplay, the printed circuit board in 3D

    Smartdisplay

    BearLaboratory/smartdisplay-hardware

    2.9寸墨水屏个人显示终端硬件显示

    46 parts175GPL-3.0

Questions

How big is the Archetype PCB?

It measures 60 × 40 mm and has 6 copper layers, 1.6 mm thick.

What parts does the Archetype use?

144 parts, built around the W25Q128JVSIQ, COS8551TRA and ME6211C33M5G-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Archetype KiCad files?

From the Fredrik-Reinholdsen/archetype repository on GitHub, at the commit this page was made from: the board is kicad/Archetype.kicad_pcb and its schematic kicad/Archetype.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Archetype design in my own project?

Its repository states no licence, so its author keeps all rights: ask Fredrik-Reinholdsen before reusing the design.